Harman Kardon Citation MultiBeam™ 700
Den smarteste kompakte lydplanken med MultiBeam™ surroundlyd
Getting started with your Harman Kardon Citation MultiBeam™ 700
Documents & Downloads
Specifications
- Merk
- CITATION MULTIBEAM 700 er i samsvar med EU-kommisjonens forordning (EF) nr. 1275/2008 og (EU) nr. 801/2013.
- Strømforbruk:-
- Av-modus
- N/A
- Standby
- N/A
- Nettverk i standby*
- 2,0 watt
- Tid til nettverksstandby
- 18 minutter *
- Nettverk i standby
- hvis noen trådløs tilkobling til enheten er deaktivert, og det dermed ikke er noe video- eller lydsignal til enheten, vil den automatisk gå inn i nettverksstandby-modus etter 18 minutter.Alle lyd- eller videosignaler vil hente enheten fra standby- til driftsmodus.
- Elementerr
- 2 x 25 mm diskanthøyttaler, 5 x 50 mm basshøyttaler
- Utgangseffekt
- 210W RMS
- Signal-til-støy-forhold
- >80 dB
- Mål (B x H x D)
- 790 x 65 x 130 mm (31,1" x 2,6" x 5,1")
- Vekt: 3,7kg (8,1 lb)
- Bluetooth®-versjon
- 4.3
- Frekvensområde for Bluetooth-sender
- 2402 – 2480 MHz
- Bluetooth-senderens strøm
- <10dBm
- Modulasjon for Bluetooth-sender
- GFSK,π/4 DQPSK, 8DPSK
- Trådløst nettverk
- 802.11 a/b/g/n/ac (2,4 GHz / 5 GHz)
- 2.4G Frekvensområde for Wi-Fi-sender
- 2412 - 2472 MHz (2,4 GHz ISM-bånd, 11 kanaler i USA, 13 kanaler i Europa og andre land)
- 2.4G Wi-Fi-sendereffekt
- < 20 dBm
- 2.4G Wi-Fi-modulasjon
- DBPSK, DQPSK, CCK, QPSK, BPSK, 16QAM, 64QAM
- 5G Wi-Fi-sendereffekt
- <23dBm
- 5G Wi-Fi-modulasjon
- QPSK, BPSK, 16QAM, 64QAM, 256QAM
- 5G Frekvensområde for Wi-Fi-sender
- 5,15–5,35 GHz, 5,470–5,725 GHz, 5,725–5,825 GHz
- Strømforsyning
- 100-240V ~ 50/60 Hz
- Strømforbruk i hvilemodus
- <2,0 watt
- Google, Google Play, Chromecast, Chromecast built-in, Google Homeog andre relaterte merker og logoer er varemerker som tilhører Google Inc.
- -
- Chromecast built-in kan kreve abonnement(er).
- -
- Bluetooth® navn og logo er registrerte varemerker som eies av Bluetooth SIG, Inc. og all bruk av slike merker av HARMAN International Industries, Incorporated er lisensiert. Andre varemerker og varenavn tilhører de respektive eiere. Wi-Fi CERTIFIED-logoen er sertifiseringsmerker for Wi-Fi Alliance.
- -
- * Krever en kompatibel enhet. Tilgjengeligheten og ytelsen til visse andre funksjoner og tjenester avhenger av service, enhet ognettverk og er kanskje ikke tilgjengelig i alle områder.Det kan være nødvendig med abonnement(er), og ekstra vilkår, betingelserog/eller gebyrer kan gjelde.
- -
- Produsert under lisens fra Dolby Laboratories. Dolby og dobbel-D-symbolet er varemerker for Dolby Laboratories.
- -
- Betegnelsene HDMI, HDMI-logoen og High-Definition Multimedia Interface er varemerker eller registrerte varemerker for HDMI Licensing LLC i USA.
- -
- Funksjoner, spesifikasjoner og utseende kan endres uten varsel.
- -
Elegant lyd som snakker til deg
Elegant, dynamisk og kraftfull. Harman Kardon Citation MultiBeam™ 700 leverer full surroundlyd til TV-en, uten at du trenger ekstra høyttalere og ledninger. Som en enkeltstående lydplanke leverer den rik lyd til hvert eneste hjørne i rommet. I tillegg kan du kontrollere opplevelsen med bare stemmen din med hjelp fra Google Assistent. Når Citation MultiBeam 700 pares med resten av Citation-serien, kan den også fungere som en midtkanal for å lage det perfekte hjemmekinoanlegget med full og detaljert surroundlyd. Bruk over 300 strømmetjenester for musikk med praktiske AirPlay og Chromecast built-in. Opplev vakker lyd, uansett hvordan du lytter.
FAQs & How-Tos
-
CITATION MULTIBEAM 700
Software Update Release Notes
------------------------------------------------------------------------
Version: 93690 / MCU: 0.2122.5
Release Date: August 22, 2022
Release Media: OTA (over the air) Automatic Upgrade
What’s New- Fixed a grouping issue with other Chromecast built-in speakers
- Resolves the issues with the "Google Home" app when used with an Android device
- Improved HDMI compatibility with some TV's
- Current bass level is now shown on screen when adjusting with the remote control
- Other bug fixes and improvements
Was this helpful? Thank you for your feedback! -
For Citation ONE, Citation 100, Citation Sub and Citation Surround, Press and hold the RESET button on the speaker for 5 seconds. For Citation 300, Citation 500, Citation Bar and Citation Tower, Press and hold the RESET button on the speaker for 5 seconds, or select the Factory Reset option in the touch screen settings menu.Was this helpful? Thank you for your feedback!
-
Before starting, remove any interference that might be blocking the Soundbar side-firing speakers. Any ambient noise or sounds that could disrupt the calibration needs to be out of the room. After completing the initial setup in Google Home app, select the Settings screen on the touch display of the product. Select "Speaker Setup", and then "Calibration". Follow the directions in the display to perform the calibration. A series of tone sweeps/chirps will play in all directions, and the calibration process will finish within approx. 30-40 seconds. Calibration is done! In case you are moving the soundbar you will need to calibrate the sound again.Was this helpful? Thank you for your feedback!
-
Daily Care instructions for Citation speakers fabric (wool) Daily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years. Never use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself! Many types of stain can be removed using warm water with a microfiber cloth (not too wet). Stain removal guide If you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains. Here is how to do it. First, soak up the liquid with an absorbent napkin or Microfiber cloth. For dried stains use a spoon to roughen the surface. To avoid the stain spreading further start from the edge of the stain working towards the middle. WARNING! Be careful when using solvents, because these could dissolve the upholstery material beneath. Regular and normal cleaning Vacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth. When using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric). General information These tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device. In all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker. HARMAN do not have any recommended companies or partners to redirect any customers too. For furter information we advise visiting the fabric company called KVADRAT by clicking on these links below: https://kvadrat.dk/care-and-maintenance/upholsteries https://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf There are a lot of information about the fabric we are using and you can contact them for further information.Was this helpful? Thank you for your feedback!
-
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback! -
The Checklist
Let us walk-through a list of things needed to ensure every requirement is met.
- Check your mobile device if that is able to connect to same Wireless network.
- Make sure you are within range of your Wireless router.
- Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
- Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
- You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
- You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
- Try using a different mobile device, if you have one.
- Reboot your Wireless network router and your mobile device.
Wireless Network Extender
Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.- Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
- Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
- Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
- To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
- In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
- You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
- If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
- To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.
Was this helpful? Thank you for your feedback! -
"In certain network conditions, your speaker may not be visible from your streaming app. You can still use voice control to start & control playback. If you wish to use your phone app to control playback, please power cycle your Citation speaker and your phone."Was this helpful? Thank you for your feedback!
-
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback! -
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback!