Adapt+
Trådløs HD-mottaker
Getting started with your Adapt+
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Utgangsspenning
- >1Vrms
- Frekvensresponse
- 20Hz~20kHz -3dB
- Signal-til-støy-forhold
- >85 dB
- Inngangsforbindelser
- Bluetooth®, Aux-inn, WiFi, Optisk, Ethernet
- Dimensjoner (B x D x H)
- 143mm x 100 mm x 35 mm
- Vekt
- 285 g
- Strømforsyning
- 5VDC, 2.3A
- Strømforbruk i hvilemodus
- <3,0 Watt
- Bluetooth®-senders frekvensområde
- 2402–2480 MHz
- Bluetooth®-senderstyrke
- < 4 dBm
- Bluetooth®-senders modulasjon
- GFSK, π/4 DQPSK, 8DPSK
- 5G WiFi-senderfrekvensområde
- 5,15~5,35 GHz, 5,470~5,725 GHz,5,725~5,825 GHz
- 5G WiFi-sendestyrke
- <20 dBm (EIRP)
- 5G WiFi-modulasjon
- OFDM, BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM
- 5G WiFi-nettverkskompatibilitet
- IEEE 802.11 n/ac
- 2,4G WiFi-senderfrekvensområde
- 2412–2472 MHz (2,4 GHz ISM-bånd, USA 11 kanaler, Europa og andre 13 kanaler)
- 2,4 G WiFi-sendestyrke
- <20 dBm (EIRP)
- 2,4 G WiFi-modulasjon
- OFDM, DSSS, DBPSK, DQPSK, CCK, 16 QAM, 64 QAM
- 2,4 G WiFi-nettverkskompatibilitet
- IEEE 802.11b/g/n
- Dimensions (W x D x H)
- 143mm x 100mm x 35mm
- Input connections
- Bluetooth®, Aux-in, Wi-Fi, Optical
- Bluetooth® transmitter modulation
- GFSK, π/4 DQPSK, 8DPSK
- 5G Wi-Fi modulation
- OFDM, BPSK, QPSK, 16QAM, 64QAM, 256QAM
- 2.4G Wi-Fi modulation
- OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
- 2.4G Wi-Fi transmitter frequency range
- 2412 – 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
- 5G Wi-Fi transmitter frequency range
- 5.15~5.35GHz, 5.470~5.725GHz, 5.725~5.825GHz
- Bluetooth® transmitter frequency range
- 2402 – 2480MHz
- Output voltage
- >1Vrms
- Bluetooth® transmitter power
- <4dBm
- 5G Wi-Fi transmitter power
- <20dBm (EIRP)
- 2.4G Wi-Fi transmitter power
- <20dBm (EIRP)
- Power supply
- 5VDC, 2.3A
- Power consumption in sleep mode
- <3.0 Watts
Omdanner stereoen eller hjemmekinoen til et trådløst musikkstrømmingssystem
Harman Kardon Omni Adapt+ er en trådløs HD-musikkmottaker. Den oppgraderer ditt eksisterende stereo- og hjemmekinoutstyr til å bli et trådløst HD-musikksystem. Den gir deg også tilgang til musikktjenester som Spotify Connect og Chromecast built-in . Enkel å sette opp og lett å betjene, Adapt+ er den raskeste måten for avspilling av trødløs musikk i hjemmet, enten med én høyttaler eller mange!
Du kan sømløst strømme favorittmusikken over hele hjemmet ditt og til alle Harman Kardon Omni+ trådløse HD-produkter. Lytt til unik musikk i hvilket som helst rom i hjemmet.
Du kan strømme favorittsangene og spillelistene dine trådløst i hjemmet med Spotify Connect, ved hjelp av Spotify-appen som fjernkontroll. Spotify Connect-funksjonen krever et Spotify Premium-abonnement.
Med Chromecast built-in , kan du organisere favorittmusikken din, radiostasjoner og podcast fra et mobilapparat til høyttalerne. Chromecast built-in kan kreve abonnement(er).
Harman Kardon Omni Adapt+ støtter 24bit / 192kHz HD-lydstrømming. Nyt en overlegen lydopplevelse, med høyere lydkvalitet enn fra en CD.
Koble sammen din TV, iPod, DVD eller hva som helst via Bluetooth, Optical, eller 3,5 mm inngang til din Omni Adapt+ og den vil automatisk strømme din musikk til hvilke som helst andre Harman Kardon Omni+ høyttalerne trådløst i hjemmet ditt.
Gå fra rom til rom mens favorittmusikken følger deg med ett enkelt klikk. Du trykker bare på Lenke-knappen for å starte musikken – ingen behov for å finne telefonen din, bare trykk på knappen.
Støtter den siste 802.11AC trådløse hjemmenettverksteknologien og dobbeltbånd (begge 2,4 GHz og 5 GHz) WiFi-forbindelse, hvilket gir en raskere, robust og mer stabil trådløs forbindelse
Det er enkelt å sette opp systemet og du kan styre det med Harman Kardon Controller-app. Med ekstra støtte for WAC på Apple-apparater og en steg-for-steg-veiledning i appen, kan du raskt starte musikkstrømmingen.
Harman Kardon Omni Adapt+ kan brukes som del av et stereo- eller multikanal høyttalersystem. Med innebygd Dolby Digital koding, kan du til og med bruke det til å sette opp et 5.1 hjemmekinosystem.
FAQs & How-Tos
10 results
-
Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.Was this helpful? Thank you for your feedback!
-
The ADAPT+ is made to connect an external subwoofer. The subwoofer needs to be an active device, which means that it must have its own, built-in amplifier.Was this helpful? Thank you for your feedback!
-
There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.Was this helpful? Thank you for your feedback!
-
On the bottom of your ADAPT+ there is a reset button. Hold it down for 5 seconds, until the round button LED lights up in white. The product is now reset and ready to be set up again.Was this helpful? Thank you for your feedback!
-
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback! -
No, that is not possible. However, you can create a 5.1 wireless surround system to extend your TV or movie sound. All you need is two additional OMNI+ speakers, such as 2 x OMNI 10+, OMNI 20+ or OMNI 50+.Was this helpful? Thank you for your feedback!
-
To have the best possible performance for OMNI+ system we advise to have a dual-band router with a powerful chipset and ram for best Wi-Fi performance. This will not only help our products to perform better and more stable, but your other devices at home will have more power and fewer interruptions. Please also be sure that your home Wi-Fi router has Multicast enabled, as our Omni+ system requires this feature enabled in order to work (same goes for Chromecast devices). Always connect our Omni+ system to 5 GHz Wi-Fi whenever possible to limit the risk of devices being slow or interrupted on 2.4GHz Wi-Fi.Was this helpful? Thank you for your feedback!
-
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback! -
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback! -
For OMNI BAR+, three sources are available: HDMI (not applicable for ADAPT+), Optical or AUX input. For Adapt+ two sources are available: Optical in/outputs and Analog in/outputs. If you select "Watching movies and TV shows" in the HK controller app for either one of them, you will have a very little delay and good lip sync with the TV for video applications. However, you will not be able to rebroadcast the TV signal to other OMNI+ speakers when selecting this mode. If you select "Listening to music", you will be able to rebroadcast TV signal to other OMNI+ speakers in your house, however, you will have lip sync delay with video material. Select that specific mode if you use HDMI (not applicable for ADAPT+), Optical or AUX for music only. Using Chromecast, Spotify Connect or Bluetooth is not part of these modes. When using one of these streaming methods, you are able to rebroadcast any music source.Was this helpful? Thank you for your feedback!
