How To

How To

441 results
  • BDS 280S and 580S support 802.11b, g and n. (2.4GHz ISM Band, Europe 13 Channels).
  • To ensure the best sound experience, the battery performance of the Onyx Studio 9 is adjusted under the following conditions:


    1. The speaker is in battery mode and the battery level is below 30%.

    2. The music volume is at or above 50%.


    To charge your device, try plugging in the AC cable or lowering the music volume.

  • An unstable internet or connectivity might cause software updates to fail during the Stereo Boost Pairing mode.

    Press and hold the "Bluetooth" button to quit the Stereo Boost Pairing mode, and update the speaker independently.

  • The remote is only capable of operating one device at a time (unless you have programmed advanced functions such as Volume, Channel or Transport control Punch-Through). When you press the Source Selector to operate your other product, such as the DVD player, the remote cannot control any other product, including the AVR, until you press the AVR Button again. To avoid your problem in the future, always press the AVR Button or appropriate Source Selector before you enter any command.
  • This is by design to achieve maximum battery play time. To get Maximum loudness connect the unit to AC power during usage.

  • You need to charge your Onyx Studio 9 using the power cord included in the package. It takes about 4 hours to fully charge.

  • Due to compatibility issue, clear the Harman Kardon One app cache and try to update it again.

  • The speaker has an auto calibration feature, which measures the space around the speaker and adjusts the sound quality based on the room around it. Auto calibration will automatically work when you power on the speaker and begin playing music. For the best sound, we recommend placing the speaker in the middle of the room, at least 0.5 meters away from any walls.

  • When placing speakers close to a wall, bass level increases. For more bass, place the speaker in a corner if possible, and for less bass, try to place the speaker farther away from any walls.
  • Using Wi-Fi allows you to listen to your music in a higher sound quality since Bluetooth protocol compresses the audio signal, where Wi-Fi data easily stream HD Audio content. Take calls without interrupting your current audio music, where Bluetooth will interrupt the stream, because it is a one-way protocol. Control your music from anywhere in the house, where Bluetooth have a limited range. Play the same music across multiple speakers and when using the newest connect features, such as Spotify Connect or Chromecast built-in, then you don't have to worry about battery life, since the devices playing is doing all the data transmission compared to Bluetooth, where it is data between source and device.
  • Yes, they will work together. You can link rooms containing 1st generation Omni speakers with rooms containing 2nd generation Omni speakers and listen to the same music across all of them. Since the 2nd generation has a more powerful processor, we recommend connecting external sources like AUX or Bluetooth to the 2nd generation speakers rather than the 1st generation.
  • Yes. Just connect an Adapt to your existing Hi-Fi equipment or active speaker via the 3.5mm line out port to transform any speaker into a wireless speaker in the Harman Kardon Wireless HD Audio System
< 1 ... 33 34 35 36 37 38 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +44 161 222 3325

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00

message

WhatsApp Us

Send us a message on +44 161 222 3325 or click  here 

Monday - Friday: 08.00-17.00
Saturday - Sunday: 09:00-15:00