Adapt+

Adapt+

Trådløs HD-modtager

Getting started with your Adapt+

Getting started with your Adapt+

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Specifications

Udgangsspænding
> 1 Vrms
Frekvensområde
20 Hz-20 kHz -3 dB
Signal-støj-forhold
> 85 dB
Inputtilslutninger
Bluetooth®, Aux-in, Wi-Fi, Ethernet
Mål (B x D x H)
143 mm x 100 mm x 35 mm
Vægt
285 g
Strømforsyning
5 VDC, 2,3 A
Strømforbrug i dvaletilstand
< 3,0 Watt
Bluetooth®-senders frekvensområde
2402-2480 MHz
Bluetooth®-sendereffekt
< 4 dBm
Bluetooth®-sendermodulation
GFSK, π/4-DQPSK, 8-DPSK
5G WiFi-senders frekvensområde
5,15~5,35 GHz, 5,470~5,725 GHz,
5,725~5,825 GHz
5G WiFi-sendereffekt
< 20 dBm (EIRP)
5G WiFi-modulation
OFDM, BPSK, QPSK, 16QAM, 64QAM, 256QAM
5G WiFi-netværkskompatibilitet
IEEE 802.11 n/ac
2.4G WiFi-senders frekvensområde
2412-2472 MHz (2,4 GHz ISM bånd, USA 11 kanaler, Europa og andre 13 kanaler)
2,4G WiFi-sendereffekt
< 20 dBm (EIRP)
2,4G WiFi-modulation
OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
2,4G WiFi-netværkskompatibilitet
IEEE 802.11b/g/n
Dimensions (W x D x H)
143mm x 100mm x 35mm
Input connections
Bluetooth®, Aux-in, Wi-Fi, Optical
Bluetooth® transmitter modulation
GFSK, π/4 DQPSK, 8DPSK
5G Wi-Fi modulation
OFDM, BPSK, QPSK, 16QAM, 64QAM, 256QAM
2.4G Wi-Fi modulation
OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
2.4G Wi-Fi transmitter frequency range
2412 – 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
5G Wi-Fi transmitter frequency range
5.15~5.35GHz, 5.470~5.725GHz, 5.725~5.825GHz
Bluetooth® transmitter frequency range
2402 – 2480MHz
Output voltage
>1Vrms
Bluetooth® transmitter power
<4dBm
5G Wi-Fi transmitter power
<20dBm (EIRP)
2.4G Wi-Fi transmitter power
<20dBm (EIRP)
Power supply
5VDC, 2.3A
Power consumption in sleep mode
<3.0 Watts

Forvandler dit stereoanlæg eller din hjemmebiograf til et trådløst streamingsystem

Harman Kardon Omni Adapt+ er en trådløs HD-musikmodtager. Den opgraderer dit eksisterende stereoanlæg og din hjemmebiograf til et trådløst HD-musiksystem. Den giver også adgang til musiktjenester som Spotify Connect og Chromecast built-in. Adapt+ er let at opstille og bruge og er den hurtigste måde at spille trådløs musik på hvor som helst i dit hjem med én højtaler eller mange.

Afspil din yndlingsmusik uden afbrydelser overalt i dit hjem og til ethvert trådløst Harman Kardon Omni+ produkt. Lyt til forskellig musik i hvert af hjemmets værelser.
Afspil dine yndlingssange og playlister trådløst overalt i dit hjem med Spotify Connect, og brug Spotify-appen som fjernbetjening. Spotify Connect-funktionen kræver Spotify Premium-abonnement.
Med Chromecast built-in kan du sende din yndlingsmusik, radiostationer og podcasts fra din mobilenhed til dine højttalere. Chromecast built-in kan kræve abonnement(er).
Harman Kardon Omni Adapt+ understøtter 24 bit/192 kHz HD-lydstreaming. Få en overlegen lydoplevelse med højere lydkvalitet end fra en CD.
Forbind dit fjernsyn, iPod, DVD eller hvad som helst via Bluetooth, optisk eller 3,5 mm input til din Omni Adapt+, og den vil automatisk streame din musik trådløst til enhver anden Harman Kardon Omni+ højttaler i dit hjem.
Gå fra værelse til værelse, og din yndlingsmusik vil følge dig ved et tryk på en knap. Tryk blot på Link-knappen for at starte musikken. Du behøver ikke finde din telefon – bare tryk på knappen.
Understøtter den seneste 802.11AC trådløse hjemmenetværksteknologi og WiFi-forbindelse med dobbelt frekvensbånd (både 2,4 GHz og 5 GHz), hvilket giver en hurtigere, robust og mere stabil trådløs forbindelse
Opsæt let dit system, og styr det med Harman Kardon Controller-appen. Med yderligere understøttelse af WAC på Apple-enheder og en trin-for-trin-vejledning i appen kan du hurtigt begynde at streame din musik.
Harman Kardon Omni Adapt+ kan bruges som del af et stereo- eller flerkanals-højttalersystem. Med indbygget Dolby Digital-afkodning kan du endda bruge det til at opsætte et 5.1 hjemmebiografsystem.

FAQs & How-Tos

10 results
  • Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.
  • The ADAPT+ is made to connect an external subwoofer. The subwoofer needs to be an active device, which means that it must have its own, built-in amplifier.
  • There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.
  • On the bottom of your ADAPT+ there is a reset button. Hold it down for 5 seconds, until the round button LED lights up in white. The product is now reset and ready to be set up again.
  • Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
     
  • No, that is not possible. However, you can create a 5.1 wireless surround system to extend your TV or movie sound. All you need is two additional OMNI+ speakers, such as 2 x OMNI 10+, OMNI 20+ or OMNI 50+.
  • To have the best possible performance for OMNI+ system we advise to have a dual-band router with a powerful chipset and ram for best Wi-Fi performance. This will not only help our products to perform better and more stable, but your other devices at home will have more power and fewer interruptions. Please also be sure that your home Wi-Fi router has Multicast enabled, as our Omni+ system requires this feature enabled in order to work (same goes for Chromecast devices). Always connect our Omni+ system to 5 GHz Wi-Fi whenever possible to limit the risk of devices being slow or interrupted on 2.4GHz Wi-Fi.
  • If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
     
  • If the network does not appear, you can manually type in the network name (SSID) and password to connect.
     
  • For OMNI BAR+, three sources are available: HDMI (not applicable for ADAPT+), Optical or AUX input. For Adapt+ two sources are available: Optical in/outputs and Analog in/outputs. If you select "Watching movies and TV shows" in the HK controller app for either one of them, you will have a very little delay and good lip sync with the TV for video applications. However, you will not be able to rebroadcast the TV signal to other OMNI+ speakers when selecting this mode. If you select "Listening to music", you will be able to rebroadcast TV signal to other OMNI+ speakers in your house, however, you will have lip sync delay with video material. Select that specific mode if you use HDMI (not applicable for ADAPT+), Optical or AUX for music only. Using Chromecast, Spotify Connect or Bluetooth is not part of these modes. When using one of these streaming methods, you are able to rebroadcast any music source.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +45 32712498

Mandag - Fredag - 09:00 - 17:00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 11:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00