If you are experiencing issues when setting up your HK Citation Oasis to your WiFi network using the Google Home app, then please turn Bluetooth off on your phone, then turn Bluetooth back on again and try the setup again.

Looking to register your product?
We have addressed some of the questions that you might have. But feel free to reach out to us anytime you need us!

Where can I register my product?
Visit our product registration page here.


Do I need to register my product for warranty?
No. Warranty is never depending on the registration of a product. Registration simply helps keep a record of your purchase(s) and gives you the opportunity to stay update on any information about your product(s).


Do I need an account to register my product?
Yes. We have made it easy to create an account for you so you can enjoy the benefits of having an account, including the option of registering your product.



Already registered a product and have questions?
Go no further! We hope you can answer your questions below. If needed, get in touch. We are always here to help you!

Can I edit an existing product registration of mine?
Partly, yes. You can edit the “Date of purchase” and “Serial Number” fields.

To do so, log into your account and select "My Product Registrations", find the relevant product from your list of registrations and select “View Registration”. Here you will find the option “Edit registration”.

If you wish to make changes to any other fields, please delete the relevant registration completely (see instructions below) and simply create a new registration.


Can I delete an existing product registrations of mine?
Yes. To delete an existing product registration, you can use the “Delete registration” option.

Log into your account and select "My Product Registrations", find the relevant product from your list of registrations and select “View Registration”. Here you will find the option “Delete registration”.
 

RADIANCE 2400

Software Update Release Notes

------------------------------------------------------------------------

Version:  94384

Release Date: July 8, 2024

Release Media: OTA (over the air) Automatic Upgrade

1. Upgrade to Google SDK 1.56 to resolve issues related to Wi-Fi set up in the Google Home app and compatibility with 1st party Google speakers.

No, that is not possible. However, you can create a 5.1 wireless surround system to extend your TV or movie sound. All you need is two additional OMNI+ speakers, such as 2 x OMNI 10+, OMNI 20+ or OMNI 50+.

Make sure you download the latest version of the app from the Apple App Store or Google Play (for Android devices). - Make sure you device is connected to the same wireless network as your AVR1x1S or AVR1x10S model and not on 3G/LTE.

Returns Policy

Buy with confidence. Your satisfaction is 100% guaranteed! To learn more our free and easy returns, please visit this link:

https://www.harmankardon.com/returns.html

 

The Roon controller (DLNA) is not supported, but it is possible to use the Chromecast or Airplay from the Citation Amp to create a room within the Roon app (needs subscription with Roon).

In the United States a business must charge sales tax in states where they have a physical presence (a warehouse, store, administrative office, sales office, etc.). When buying direct from Harman or any of our subsidiaries, we are required by law to charge sales tax in the following states where we have a physical presence. All other states are not subject to sales tax.

California 

Connecticut 

Florida 

Georgia 

Kentucky 

Michigan 

Missouri 

New Jersey 

New York 

North Carolina 

Pennsylvania 

South Carolina 

South Dakota 

Tennessee 

Washington 

West Virginia 

Wisconsin

As default the line output is set to Fixed. You can change it to variable in the advanced settings.

1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Enable Bluetooth
4. Enable Location services
5. Open your Google Home app
   1. Make sure you have permitted the Google Home app to view your location.
6. First option Tap Add Set up device Set up new devices in your home
7. Second  option Tap X device found Select Home location
8. Follow the instruction on screen to add your new Harman Kardon Citation speaker.

 

Still not sure how to connect, then watch this video below:

1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Open your Google Home app .
4. Enable Bluetooth
5. First option Tap Add Set up device Set up new devices in your home
6. Second  option Tap X device found Select Home location
7. Follow the instruction on screen to add your new Harman Kardon Citation speaker.

Still not sure how to connect, then watch this video below:

 

Shipping & Delivery Information

We offer FREE ground shipping every day and FREE 2nd Air on orders including portable speaker. We also have holiday shipping options to make sure your items arrive when you need them. To learn more, please click on this link:

https://www.harmankardon.com/shipping.html

No, connect your AURA to your home network (see QSG) once your AURA is connected and your device is on the same network. Simply open Spotify Premium, and a small speaker icon will be visible inside the app.

Due to Amazon Alexa's registration security, when you try to set up Amazon Alexa in the SmartThings app, it will automatically generate a "Enter code" pop-up on the "Register Your Device" screen. You can ignore this and just press "Continue" to proceed. You do not need to enter a code.

If you cannot stream music via AirPlay on your AirPlay compatible device, proceed with the following steps: 

1. Open the SmartThings app
2. Go to device's page in SmartThings app.
3. Select "Third Party Services".
4. Select "AirPlay".
5. Select "Reset AirPlay".

 

Never remove a USB stick while the BDS is playing files from it. If the system freezes, switch the BDS unit OFF and then ON with the switch on the back panel to reset.

"In certain network conditions, your speaker may not be visible from your streaming app. You can still use voice control to start & control playback. If you wish to use your phone app to control playback, please power cycle your Citation speaker and your phone."

Try another HDMI cable, and make sure that it is a high-speed version. This solution usually solves the problem, which is caused by insufficient cable bandwith.

If your SmartThings compatible speaker is not found during the setup process, try the following steps:

1. Ensure that your phone/tablet with the SmartThings app is less than 10m/33ft from the speaker during initial set-up.
2. Make sure your speaker is plugged into power and the LED display lights up.
   1. If the LED display is not turning on, reset the product to its factory settings.
   2. Once reset, try setting the speaker up again.
3. Power cycle your speaker. Restarting your speaker will often help resolve the issue with products not showing up during the setup. 
4. Unplug the power cord.
5. Wait for about 10 seconds.
6. Reconnect the power cord and make sure that the speaker is powering up.
7. Temporarily relocate your product by moving the speaker closer to your router.
   1. If your speaker is able to connect in this new location, the original location may be too far from the router to maintain a stable connection.
8. Use a different mobile device.
9. If the error persists, try using a different device that has the SmartThings app installed and is connected to your speaker.

 

This product features an echo-cancelling speaker phone for calls and meetings. 

This device supports both FAT16 and FAT32 USB formats.

Harman Kardon Radiance 2400 can decode Dolby Audio and DTS.

Dolby Atmos is not supported, but will be rendered as Dolby Audio.
Dolby Digital 5.1 and DTS Surround (2.0 and 5.1) is supported, but will be downmixed to 2.1/2.0.
DTS Master Audio is not supported.

To switch from using AirPlay or Chromecast to Bluetooth, proceed with the following:
If this is your first time connecting the speaker via Bluetooth to your source device:

1. Press the Bluetooth button on your speaker. You should notice the button will begin flashing blue.
2. On your Bluetooth enabled source device, go to your settings
3. Make sure Bluetooth is turned on
4. Select your speaker from the list of available devices
5. Your speaker will change from flashing blue to a solid blue color once the speaker has been successfully paired.

If you have previously connected your source device to the speaker via Bluetooth:

1. Switch to Bluetooth input on the speaker by pressing the Bluetooth button.
2. Go to the settings of your source device
3. Make sure Bluetooth is enabled
4. Make sure your speaker shows as connected.
   1. If your speaker does not show that it is connected, click on the speaker from the list of devices
   2. If the speaker fails to connect after the previous step, you may need to select "forget this device" and proceed with the steps listed above.
5. Play music from the music streaming app via Bluetooth.

The amber LED lights indicate that the microphone is muted and the Google Assistant will not react to any voice keywords until the microphone is unmuted.

It is true that some Bluetooth products have a very loud BT acknowledgment tones. We are sorry, but the level of such tones cannot be changed, and no software solutions will appear.

Be aware that the BDS X75 and X77 have two power modes. By pressing the power button briefly, the unit goes into sleep mode, and the fan keeps cooling the unit. Holding down the power button for a couple of seconds puts the BDS into standby, and the fan stops.

If there isn't any input for 10 minutes, the ESQUIRE 2 will go into sleepmode, and after 20 minutes more of no activity, it will power itself off.

Your model AVR is equipped with a cooling fan that only comes on when the unit's internal temperature rises above a predetermined limit. Thanks to the massive heat sinks used in the AVR series, this temperature is rarely reached. A typical situation where the fan will come on is when the AVR is operating at a very loud volume level with program material that has sounds in all seven channels. Since this is a rare occurrence, you may never notice the fan working. In any case, when the fan does come on, the volume will be loud enough that you might not notice it. Thus, you may own an AVR for many years and never hear the fan, or see it in operation. There is no way to test the fan, and none is needed.

Although the owner's manual states that owner can use this connector for home upgrade procedure, this is not so. The USB-connector used cannot be bought in commercially available cables, and the port must be considered for technician's use only.

Verify your TV supports the ARC feature.Make sure you enable the external speakers/ARC/digital audio output on your TV, this varies by TV manufacturer. Set the AVR1x1S to the TV input. Go into the AVR menu settings and under System Settings, make sure Audio Return Channel is set to Auto and set the TV Control to on.