Adapt
Wireless HD Audio Adaptor
Getting started with your Adapt
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Bluetooth
- Output Voltage
- >1Vrms
- Bluetooth Transmitter Frequency Range
- 2402 – 2480MHz
- Bluetooth Transmitter Power
- less than 4dBm
- Bluetooth Transmitter Modulation
- GFSK, 3.14/4 DQPSK, 8DPSK
- 2.4G Wi-Fi Transmitter Frequency Range
- 2412 – 2472MHz
- 2.4G Wi-Fi Transmitter Power
- less than 20dBm (EIRP)
- 2.4G Wi-Fi Modulation
- OFDM, DSSS, DBPSK, DQPSK, CCK,
- 2.4G Wi-Fi Network Compatibility
- IEEE 802.11b/g/n
- Weight (g)
- 121
- Power consumption in sleep mode
- <3 Watts/Hour
- Note - The HK Omni Adapt is intended to be used for streaming music via Bluetooth and Wi-Fi technology. This product is designed to be instantly on and ready to play music at a moment's notice. The HK Omni Adapt is in compliance with the European Union energy legislation. It will enter into sleep mode (networked standby) after 10 minutes without operation, after which it can be re-activated via Bluetooth or Wi-Fi.
- Width (mm)
- 118
- Width (in)
- 4-5/8
- Depth (mm)
- 86
- Depth (in)
- 3-3/8
- Height (mm)
- 30
- Height (in)
- 1-3/16
Wireless room-filling stereo sound at the touch of a button
The Harman Kardon Adapt is a wireless, truly HD audio stereo adaptor. It updates your existing Hi-Fi gear with pure, crisp sound thanks to Harman’s expertise in audio technology. Now the music doesn’t stop no matter where you are in your home. Simply set up multiple speakers or adaptors and enjoy wireless room filling sound at the touch of a button. Play different music in different rooms or stream the same song throughout your house with party mode. Our app and Bluetooth capability let you access any music from your phone or your favorite apps seamlessly.
Seamlessly stream your favorite music to all Harman Kardon wireless HD audio products in your house.
Stream your favorite classical music to one room while streaming rock to another. Multiple streams keep everyone happy.
Walk from one room to another and your favorite music will follow at the touch of a button.
Use the Harman Kardon app to stream your favorite music anywhere in your home. Control and configure your HD audio system wirelessly via the app with no cable connection required.
Start a party and jump right in! When multiple songs are playing wirelessly, one button press cycles through them all so you can pick your favorite. One long press of the button starts party mode with every speaker playing back the same music. Room to room control made easy without the need to use your phone or tablet.
Unlike other wireless streaming systems, the Harman Kardon Omni 10supports 24bit / 96kHz Studio Quality HD audio streaming. Enjoy a superior audio experience, higher resolution than from a CD.
FAQs & How-Tos
4 results
-
There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.Was this helpful? Thank you for your feedback!
-
Make sure you disable AP/Client isolation on your Access Point / Extender and that Multicast forwarding is not disabled between the W-Fi networks. However, we cannot guarantee than streaming will work flawless as Extender networks are tricky and can cause many issues. Always use a 5GHz Wi-Fi network extender for best results.Was this helpful? Thank you for your feedback!
-
Unfortunately, some Huawei phones are not able to stream music from the HK Controller app to 1st generation Omni speakers. However, the new Omni 10+, 20+, and 50+ have fixed this issue, and you will be able to stream music to them using your Huawei phone.Was this helpful? Thank you for your feedback!
-
To set up the Harman Kardon Adapt in the HK Controller app, you have to select "One speaker", not the Adapt+ option. When selecting "One speaker", simply follow the on-screen instructions to install your Adapt on the Wi-Fi network. Note that the instructions for Adapt devices will appear on your screen after 30-45 seconds (Only Apple devices).Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Talk to a product expert
Call us now at:
Please see below
Globe: +63 917 849 7697
Smart: +63 998 542 0234
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)
Chat with us
Mon - Fri - 8:00 a.m 5:00 p.m (PHT)