How To
How To
442 results
-
If the Harman Kardon Go + Play is not stable or wobbles on a surface, one of the legs on the bottom of the speaker is adjustable with a Philips screwdriver. The adjustable leg is the one with a screw is in the center of the leg.Was this helpful? Thank you for your feedback!
-
No, shipping is on us. You can send your order back within 30 days for a full refund.
To initiate a return request, go to "Return Products" under "Order Support" in the menu bar.
Was this helpful? Thank you for your feedback! -
AirPlay uses a differnet network card inside the BDS. If it doesn't receive any IP adresses, it won't work. To check and see if your network card in BDS did receive an IP address, you can use an app called Net Analyzer for iOS and WiFi Analyzer for Android. Simply scan your network with one of them, and you should be able to see your BDS IP address, usually the IP after your main IP for BDS, should be AirPlay network details. If you have trouble, please contact our helpdesk for further assistance.Was this helpful? Thank you for your feedback!
-
This is because most Windows do not support A2DP stereo audio streaming via Bluetooth, the standard for music-listening through Bluetooth. The system will support keyboards, mice, printers etc. via Bluetooth, but not audio. It is necessary to download the proper drivers, either from the computer manufacturer, the software manufacturer or the manufacturer of the Bluetooth chip in the computer. Help to do this must be sought with the companies that supply one or more of these computer features.Was this helpful? Thank you for your feedback!
-
This happens if you power up the subwoofer before connecting the right and left speakers. The system mutes to avoid potentially harmful pop noise. Just touch one of the volume up/down pads to unmute.Was this helpful? Thank you for your feedback!
-
High pass filter
When the subwoofer is connected, the main channels are "Small", meaning that there is a high-pass filter. This ensures proper blending with the subwoofer.
Crossover settingsThe Citation amp supports crossover settings in the range 50Hz - 120Hz. Default is 80Hz.
Multiple subwoofers?Only one type of subwoofer is supported at a time. Either with cable or wireless.
Was this helpful? Thank you for your feedback! -
There are several ways to access the advanced settings. In the settings page, you can adjust settings for subwoofer, EQ and input sensitivity.
Make sure your PC or smartphone is connected to the same network as Citation AMP:
1. On a PC, go to the "Network" folder". There you can find an icon for the Citation Amp. Double click that, and you are taken to the internal webpage for advanced settings for your Citation Amp.
2. Or, in the Google Home app, go to settings for the Citation Amp. At the bottom of the page, you can find the device IP address. Copy and paste this address into your web browser, and you are taken to the internal webpage for advanced settings for your Citation Amp.Was this helpful? Thank you for your feedback! -
The 12V trigger output can be used with a stereo 3.5mm jack cable. The 12v trigger signal is present in the ring/right-ch connection.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00