Support Overview / Home Audio / Receivers / Receivers - Surround Sound / AVR 760

AVR 760

7 x 85W 7.2-ch AV receiver with HDMI 1.4, The Bridge II included

Documents & Downloads

Manuals

Specifications

General Specifications

Type: 7.2-Channel AVR

Continuous Average Power (FTC) per Channel (stereo mode): 100 x 2 / 20Hz – 20kHz, 8 ohms, both channels driven

Continuous Average Power (FTC) per Channel (surround modes): 85 x 7 / 20Hz – 20kHz, 8 ohms, all channels driven

Amplifier Type: High-Current ±60 amps

Total Harmonic Distortion: 0.07% @ 8 ohms

Bandwidth: 20Hz – 20kHz

Bandwidth @ 1W (-3dB): 10Hz – 130kHz

Signal-to-Noise Ratio: 100dB (IHF-A)

Power Supply: Independent front & rear

Surround Modes: Dolby Digital Plus, Dolby TrueHD, Dolby Digital EX, Pro Logic IIx, Dolby Virtual Speaker, DTS-HD, DTS-HD Master Audio, DTS 5.1, DTS-ES 6.1 Discrete & Matrix, DTS 96/24, DTS Neo...6, Logic 7

Headphone Modes: 2-Channel, Dolby HP

Multizone Capability: Audio/video, with remote

Assignable Rear-Channel Amplifiers: Yes

A-BUS Ready: Yes

EzSet: EzSet/EQ II

S-Video/Component Video Inputs: 4

Analog Audio Inputs: 6

Digital Audio Inputs: Rear panel 3/3

Digital Audio Inputs: Front panel 1/1

Digital Audio Outputs (Coax/Optical): Rear panel 1/1

USB Port: Yes

Ethernet Input: Yes

Digital Input Polling: All video inputs

Direct Audio Inputs: 7.1 With bass management

DMP The Bridge II Input: Yes

HDMI: 1.3a With audio/video processing

HDMI: Inputs... 4

HDMI: Output... 1

Preamp Outputs: 7.2 Channels

Component Video Inputs (Assignable): 3 @ 100MHz

Bass Management: Quad crossover

On-Screen Display: Yes, on HDMI and component

Input Titling: All inputs

DSP Processor: Dual TI DA 710

Output DACs: 192kHz/24-bit

Video Processing / Conversion: Faroudja DCDi Cinema/scaling to 1080p

High-Resolution GUI: Yes

A/V Sync Delay: 200mS

IEC Detachable Power Cord: Yes

System Remote: 8-Device, backlit, learning & preprogrammed

IR In/Out Jacks: Yes

IR Carrier Output: Yes

Discrete Remote On/Off Codes: Yes

Low-Voltage Trigger Jacks: 2

External Data Port: USB and RS-232

Speaker Terminals: Color-coded binding posts

Dimensions

Weight: 23.6kg

Dimensions (H x W x D): 151mm x 440mm x 426mm

Harman Kardon® is one of the audio industry’s most-powerful and most-capable companies, and the AVR 760 is the most-powerful and most-capable A/V receiver it makes. So it should come as no surprise that the AVR 760 does almost everything you can imagine – including automatically adjusting volume levels when you switch between sources and channels, thanks to new Dolby Volume technology. Two onboard 32-bit DSP processors deliver other essential Dolby and DTS technologies, including Dolby TrueHD and DTS-HD. The latest version of our exclusive Logic 7 processing and Faroudja DCDi Cinema video processing are included to make any source material look as great as it sounds. Whatever input you throw at it – HDMI, analog, component or S-video sources; computer-based audio via a direct USB connection or from thumb drives; or your iPod using our The Bridge II docking station – the AVR 760 can handle it. You can even use a broadband connection to access a wide range of Internet radio stations. And the AVR 760 easily enables multiroom video and audio applications with Zone II and A-BUS® technology. With a true 85 watts of power to drive each of seven channels, dual subwoofer outputs and the EzSet/EQ II system to precisely tune the system’s performance parameters to the acoustic requirements of your space, the AVR 760 is the ideal receiver to satisfy a houseful of entertainment needs.