AVR 745

AVR 745

Audio/Video Receiver With Dolby Digital, DTS & HDMI 1.1 Switching (100 watts x 2 | 85 watts x 7)

Vendido desde 2006 hasta 2008

Producto predecesor: AVR 7300
Producto sucesor: AVR 7550HD
Hecho en: China

Documentos y descargas

Especificaciones del producto

Power Requirements
120V AC/60Hz
Power Consumption
8.9W Standby 130W Idle, 1,480W Max. (7 channels driven)
Digital Inputs (coaxial/optical)
3/3 on rear; 1 (switchable to output)/1 on front
Analog Inputs
1 A/V on front panel (switchable to output)
Analog Inputs
2 audio-only
Analog Inputs
5 A/V on rear panel
Analog Inputs
6-/8-channel input
Analog Inputs
tuner
On-Screen Display
Yes, with component video
Multizone Capability
Audio and video; A-BUSREADY; RS-232 serial control port; surround back channels assignable to remote zone; Zone II remote
Auto Setup
EzSet/EQ II room equalization
Remote Control
TC 30 activity-based remote control with color LCD screen
Shipping Weight (System, Accessories, Packing)
52 lb (23.6kg)
MSRP U.S.
$3499.95 each
# of Amplifier Channels
7
Continuous Average Power (FTC) per Channel (stereo mode)
100 Watts per channel @ <0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms
Front L & R Channels
85 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
85 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels (L & R Side, L & R Back)
85 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I/II/IIx
40dB
Dolby Digital
55dB
DTS
55dB
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µSec
Width
17-5/16 inch (440mm)
Height
6-1/2 inch (165mm)
Depth
17-1/8 inch (435mm)
Weight
48 lb (21.8kg)
Dimensions:
Carton Dimensions (H x W x D)
10-3/4 inch x 20-1/2 inch x 22-3/4 inch (273mm x 521mm x 578mm)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 100MHz (–3dB)
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70dB/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod. 0.8%
Distortion
FM... Mono/Stereo 0.2%/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
85 x 7 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 60 Amps

Digital audio meets digital video. The AVR 745's DCDi by Faroudja video processing upscales all incoming video to 720p or 1080i. Two HDMI; 1.1 inputs are available to decode audio for true single-wire connectivity. Digital audio extras include XM Ready capability, iPod playback through The Bridge docking station, and USB playback from compatible computers. (Optional XM antenna module and subscription to XM service required. Hardware and service sold separately. XM service is not available in Alaska or Hawaii.) Our EzSet/EQ; II system, 7.2-channel output, TC 30 remote and more make this the most flexible AVR we've ever produced.

¿No encuentras lo que buscas?

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico