Support Überblick / Home Audio / Receiver / Receiver - Surround Sound / DPR 1005

DPR 1005

Digital Path Audio/Video Receiver With Dolby Digital & DTS (70 watts x 7)

Verkauft von 2004 bis 2006

Vorgänger-Produkt:	DPR 1001
Nachfolgeprodukt:	DPR 2005
Hergestellt in:	China

Dokumente & Downloads

Kurzanleitung

Kurzanleitung (Englisch) 532.8 KB

Anderes

Servicehandbuch (Englisch) 433 KB

Produktdetails

Allgemeine Spezifikationen

Power Requirements: AC 120V/60Hz

Power Consumption:

Digital Inputs (coaxial/optical): 2/2 on Rear; 1/1 on front

Standby:: 8.9W

Analog Inputs: 1 A/V on front panel (switchable to output)

Analog Inputs: 2 audio-only

Analog Inputs: 5 A/V on rear panel

Analog Inputs: 6-/8-channel input

Analog Inputs: tuner

Idle:: 52W

Max (7 channels driven):: 760W

On-Screen Display: Yes

Multizone Capability: Audio; A-BUS Ready; RS-232 serial control port; surround back channels assignable to remote zone; Zone II remote

Auto Setup: EzSet remote

Remote Control: Backlit, eight-device, programmable learning remote(2-line LCD display)

Shipping Weight (System, Accessories, Packing): 26.4 lb (12 kg)

MSRP U.S.: $1499.95 each

Audio Spezifikationen

# of Amplifier Channels: 7

Continuous Average Power (FTC) per Channel (stereo mode): 70 Watts per channel, 20Hz – 20kHz, @ <0.15% THD, both channels driven into 8 ohms

Front L & R Channels: 70 Watts per channel @ <0.15% THD, 20Hz – 20kHz into 8 ohms

Center Channel: 70 Watts @ <0.15% THD, 20Hz – 20kHz into 8 ohms

Surround Channels (L & R Side, L & R Back): 70 Watts per channel @ <0.15% THD, 20Hz – 20kHz into 8 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 97dB (IHF-A)

Surround System Adjacent Channel Separation:

Dolby Pro Logic I/II/IIx: 40dB

Dolby Digital: 55dB

DTS: 55dB

Transient Intermodulation Distortion (TIM): Unmeasurable

Abmessungen

Width: 17.3 inches (440mm)

Height: 4.5 inches (114mm)

Depth: 18.8 inches (476mm)

Weight: 23.1 lb (10.5kg)

Dimensions:

Carton Dimensions: 22.6 inches x 8.9 inches x 21.9 inches (573mm x 225mm x 555mm)

Videospezifikationen

Television Format: NTSC

Input Level/Impedance: 1Vp-p/75 ohms

Output Level/Impedance: 1V/75 ohms

Video Frequency Response:

Composite and S-Video: 10Hz – 8MHz (–3dB)

Component Video: 10Hz – 50MHz (–3dB)

Tuner Specifications

Frequency Range: AM... 520 – 1720kHz

Frequency Range: FM... 87.5 – 108.0MHz

Signal-to-Noise Ratio: AM... 45dB

Usable Sensitivity: FM... IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio: FM... 70/68 dBA (Mono/Stereo)

Usable Sensitivity: AM... Loop 500µV

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion (Mono/Stereo): FM... 0.2/0.3%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 70dB

Image Rejection: FM... 80dB

IF Rejection: FM... 90dB

Amplifier Specifications

Amplifier Power (RMS): 70 x 7 @ 8 ohms (20Hz – 20kHz, <0.15% THD) (all channels driven at full power)

Digitally delightful. If you've always wanted a feature-packed audio/video receiver, but never thought one could fit in a small space, the DPR 1005 is a digital dream come true. Thanks to our digital path technology, you have access to a wide range of inputs and processing modes to power your system without missing a beat. Along with assignable, HD-compatible component video inputs, renameable audio inputs, and a full palette of surround sound modes and control options, the DPR 1005 excels at doing what you demand from your audio products - reproducing the original performance or movie soundtrack as it was meant to be heard!