AVR 255

AVR 255

7 x 50W 7.1-ch AV receiver with HDMI 1.3a

Vendido desde 2008 hasta 2011

Made in: China

Documents & Downloads

Specifications

Type
7.1-Channel AVR
Continuous Average Power (FTC) per Channel (stereo mode)
66W x 2 / 20Hz – 20kHz, 8 ohms, both channels driven
Continuous Average Power (FTC) per Channel (surround modes)
50W x 7 / 20Hz – 20kHz, 8 ohms, all channels driven
Amplifier Type
High-Current ±35 amps
Total Harmonic Distortion
0.07% @ 8 ohms
Bandwidth
20Hz – 20kHz
Bandwidth @ 1W (-3dB)
10Hz – 130kHz
Signal-to-Noise Ratio
100dB (IHF-A)
Power Supply
Independent front & rear
Surround Modes
Dolby Digital Plus, Dolby TrueHD, Dolby Digital EX, Pro Logic IIx, Dolby Virtual Speaker, DTS-HD, DTS-HD Master Audio, DTS 5.1, DTS-ES 6.1 Discrete & Matrix, DTS 96/24, DTS Neo...6, Logic 7
Headphone Modes
2-Channel, Dolby HP
Multizone Capability
Audio
Assignable Rear-Channel Amplifiers
Yes
EzSet
EzSet/EQ
S-Video/Component Video Inputs
4
Analog Audio Inputs
6
Digital Audio Inputs
Rear panel 2/2/0
Digital Audio Inputs
Front panel 1/1/0
Digital Audio Outputs (Coax/Optical)
Rear panel 1/1
Digital Input Polling
All video inputs
Direct Audio Inputs
7.1
HDMI
1.3a Switching
HDMI
Inputs... 3
HDMI
Output... 1
Preamp Outputs
7.1 Channels
Component Video Inputs (Assignable)
3 @ 100MHz
Bass Management
Quad crossover
On-Screen Display
Yes, on HDMI and component
Input Titling
All inputs
DSP Processor
Cirrus CS 49700
Output DACs
192kHz/24-bit
Video Processing / Conversion
Faroudja DCDi Cinema/scaling to 1080p
High-Resolution GUI
Yes
A/V Sync Delay
80mS
System Remote
7-Device preprogrammed
IR In/Out Jacks
Yes
Discrete Remote On/Off Codes
Yes
Speaker Terminals
Color-coded binding posts
Weight
14kg
Dimensions (H x W x D)
151mm x 440mm x 351mm

The AVR 255 is the most affordable Harman Kardon receiver to feature both Dolby TrueHD and DTS-HD Master Audio decoding on the audio side, and Faroudja DCDi Cinema video processing to 1080p on the video side. But there's plenty more to recommend the AVR 255, including three HDMI; inputs, connections for external amplifiers, EzSet/EQ; technology to fine-tune your system to the acoustics of your room, and an RS-232 port for future firmware upgrades. Perhaps the highest recommendation of all? As do all Harman Kardon A/V receivers, the AVR 255 features a high-current, ultrawide-bandwidth design for maximum fidelity.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 0800 2090

De Lunes a Viernes:
09:00 a.m a 6:00 p.m

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico