150+
Quadraphonic Receiver (70 watts x 2 | 30 watts x 4)
Vendido desde 1973 hasta 1975
Made in: | USA |
---|
Documents & Downloads
Specifications
- MSRP U.S.
- $699.95 each
- Dimensions (H x W x D)
- 5 x 18-3/4 x 15-1/4
- Sensitivity
- FM – 1.8 microvolts IHF(300ohms), 0.9microvolts IHF (75ohms)
- Sensitivity
- AM – 150 microvolts/meter
- Signal-to-Noise Ratio
- 70dB
- Capture Ratio
- 1.6dB
- Image Rejection
- -90dB
- Spurious Response Rejection
- -95dB
- Multiplex Separation
- 40dB @ 1kHz
- Total Harmonic Distortion
- MONO – 0.4%
- Total Harmonic Distortion
- STEREO – 0.5%
- AM Rejection
- >60dB
- SCA Suppression
- Totally inaudible
- IF Rejection
- Better than 60dB
- Selectivity
- Better than 35dB
- Alternate Channel Selectivity
- > 50dB
- Amplifier Power (RMS)
- 2-Channel – 70 watts/ch @ 8 ohms (20 – 20kHz < 0.5% THD)
- Amplifier Power (RMS)
- Quad – 4 x 30 watts
- Power Bandwidth
- <10 to beyond 40kHz @ 8 ohms
- Total Harmonic Distortion
- < 0.5% @ any power rating from .1 watt to full power
- Transient Intermodulation Distortion (TIM)
- < 0.15% @ rated output
- Damping Factor
- 50...1 @ 4 and 8 ohms
- Frequency Response
- from below 4Hz to beyond 70kHz, +/.5dB @ normal power lvls from below 1Hz to beyond 100kHz, ±1dB @ normal power lvls
- Square Wave Tilt
- <10% @ 20Hz
- Rise Time
- SQUARE WAVE – Better than 2 microseconds
- Stability
- absolutely stable with any type load
- Phono Overload
- >85+ millivolts
- Tone Controls
- BASS – ± 12dB @ 50Hz
- Tone Controls
- MIDRANGE – ±12dB @ 1kHZ
- Tone Controls
- TREBLE – ±12dB @ 10kHz
Imágenes y vídeos
¿No encuentras lo que buscas?
Llámanos
Habla con un experto sobre nuestros productos
Llámanos a este número:
0800 2090
De Lunes a Viernes:
09:00 a.m a 6:00 p.m