KP 1

KP 1

In-Wall Keypad For PA4000 Amplifier

Documents & Downloads

Specifications

Mounting System
Compatible with most standard electrical junction boxes or use with a plaster ring. Designed for use with user-supplied, Decora-style cover-plate.
Connections
8P8C RJ-45 Jack; 3-Pin Eurostyle Terminal Block
Wiring Protocols
RJ-45 modular jack 8P8C per TIA wiring specifications for T568B straight-through wiring using CM- or CP-rated Category 3 or 5 UTP, 8-pin, 8-conductor wiring, minimum 24AWG. For runs over 250 feet, thicker CL2/CL3, 4 pair, 22AWG wire may be required to preserve signal integrity. See owner's manual for further details.
Wiring Protocols
3-pin output from optional IR sensor with conductors for Signal, Ground and +12 Volts
Recommended Third-Party Optional Infrared Sensor
Xantech Micro Link Model 490-00
MSRP U.S.
$49.95 each
Weight
0.25 lb (0.11kg)
Dimensions (H x W x D)
4 inch x 1-5/8 inch x 1-9/16 inch (103mm x 41.2mm x 40.1mm)
Cutout Dimensions
1/2 inch (12.7mm) Cutout for Third-Party Optional IR Sensor

Let the KP 1 power up the PA 4000 multichannel amplifier and control speaker volume in any room in your home. Use with a Decora-style faceplate (not included) to blend with any room the KP 1 mounts in standard electrical junction boxes. When used with optional third-party IR sensors, you can also control functions of Harman Kardon DVD and CD players as well as A/V receivers.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 0800 2090

De Lunes a Viernes:
09:00 a.m a 6:00 p.m

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico