AVI 200
Audio/Video Integrated Amplifier With Dolby Pro-Logic 75 watts x 2 (65 watts x 3 front & 25 watts rear)
Vendido desde 1994 hasta 1995
| Producto sucesor: | AVI 200 II |
|---|
Documents & Downloads
Specifications
- MSRP U.S.
- $679.95 each
- Signal-to-Noise Ratio
- PHONO mm -74dB
- Signal-to-Noise Ratio
- VIDEO & CD -92dB
- Input Level/Impedance
- PHONO mm -2.5mV/47k ohms, 125pF
- Input Level/Impedance
- VIDEO, CD & TAPE -150mV/22k ohms
- Phono Overload
- 120mV
- RIAA Equalization
- ±1dB
- Tone Controls
- BASS – ± 10dB @ 50Hz
- Tone Controls
- TREBLE – ±10dB @ 10kHz
- Loudness Control
- -40dB @ 50Hz +6dB / @ 10kHz +3dB
- Continuous Average Power (FTC) per Channel (stereo mode)
- 75 watts @<0.09% THD both channels driven into 8 ohms
- Continuous Average Power (FTC) per Channel (surround modes)
- FRONT L & R, CENTER - 65 watts @<0.3%THD driven into 8 ohms
- Continuous Average Power (FTC) per Channel (surround modes)
- REAR - 25 watts @<0.7% THD both channels driven into 8 ohms
- High Instantaneous Current Capability (HCC)
- ± 40 Amps
- Negative Feedback
- 26dB
- Frequency Response
- ± 3dB 0.5Hz - 150kHz
- Slew Rate
- 80 Volts/ uSec
- Rise Time
- 1.8u Sec
- Transient Intermodulation Distortion (TIM)
- Unmeasurable
Imágenes y vídeos
¿No encuentras lo que buscas?
Llámanos
Habla con un experto sobre nuestros productos
Llámanos a este número:
0800 2090
De Lunes a Viernes:
09:00 a.m a 6:00 p.m
