PM 650
Stereo Integrated Amplifier (50 watts x 2)
Documents & Downloads
Specifications
- Amplifier Power (RMS)
- 50 watts per channel @ < 0.03% THD< primarily low order harmonics
- Power Bandwidth
- HALF POWER – 10Hz – 80kHz 8 ohms
- Frequency Response
- 4Hz – 140kHz +0,-3dB
- Rise Time
- SQUARE WAVE – 2 usec (20kHz into 8 ohms @ rated pwr output)
- Slew Rate
- 80V/usec
- Damping Factor
- > 40
- Signal-to-Noise Ratio
- AUX – 92dB, A-WTD
- Signal-to-Noise Ratio
- PHONO MM – 80dB, A-WTD (ref...5mV)
- Signal-to-Noise Ratio
- PHONO MC – 73dB, A-WTD
- Phono Overload
- MM – 200mV
- Phono Overload
- MC – 4.0mV
- RIAA Equalization
- ±0.7dB
- Phono Input Sensitivity
- RESISTANCE – 47k ohms
- Phono Input Sensitivity
- CAPACITANCE – 100pF
- Filter
- HIGHCUT – 6kHz, 12dB/octave
- Filter
- SUBSONIC – 15Hz, 12dB/octave
- Loudness Control
- +10dB @ 50Hz/+3dB @ 10kHz (volume at -40dB)
- Loudness Control
- +5dB @ 50Hz/+1.5dB @ 10kHz (volume at -15dB)
- Square Wave Tilt
- < 5% (20Hz)
- MSRP U.S.
- $424.95 each
Imágenes y vídeos
¿No encuentras lo que buscas?
Llámanos
Habla con un experto sobre nuestros productos
Llámanos a este número:
0800 2090
De Lunes a Viernes:
09:00 a.m a 6:00 p.m