How To
How To
-
This video shows how to play music and much more with your Google Assistant. You can practice all of your voice commands on your Harman/Kardon Citation or JBL LINK products.
Was this helpful? Thank you for your feedback! -
Daily Care instructions for Citation speakers fabric (wool)
Daily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.
Many types of stain can be removed using warm water with a microfiber cloth (not too wet).
Never use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!Stain removal guide
If you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.
Here is how to do it.- First, soak up the liquid with an absorbent napkin or Microfiber cloth.
- For dried stains use a spoon to roughen the surface.
- To avoid the stain spreading further start from the edge of the stain working towards the middle.
- WARNING!
- Be careful when using solvents, because these could dissolve the upholstery material beneath.
Regular and normal cleaning
Vacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.
When using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).
General informationThese tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.
In all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.
HARMAN do not have any recommended companies or partners to redirect any customers too.
For furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:
https://kvadrat.dk/care-and-maintenance/upholsteries
https://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf
There are a lot of information about the fabric we are using and you can contact them for further information.Was this helpful? Thank you for your feedback! -
Daily Care instructions for Citation speakers fabric (wool) Daily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years. Never use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself! Many types of stain can be removed using warm water with a microfiber cloth (not too wet). Stain removal guide If you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains. Here is how to do it. First, soak up the liquid with an absorbent napkin or Microfiber cloth. For dried stains use a spoon to roughen the surface. To avoid the stain spreading further start from the edge of the stain working towards the middle. WARNING! Be careful when using solvents, because these could dissolve the upholstery material beneath. Regular and normal cleaning Vacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth. When using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric). General information These tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device. In all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker. HARMAN do not have any recommended companies or partners to redirect any customers too. For furter information we advise visiting the fabric company called KVADRAT by clicking on these links below: https://kvadrat.dk/care-and-maintenance/upholsteries https://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf There are a lot of information about the fabric we are using and you can contact them for further information.Was this helpful? Thank you for your feedback!
-
Perform a factory reset on the Citation Tower speakers by pressing and holding the reset button on the back panel for 5 seconds. After the reset you can now select "Music" to set up the Tower speakers to your WiFi network.Was this helpful? Thank you for your feedback!
-
Press and hold the Volume down and Voice assistant button simultaneously for more than 10 seconds. The speaker will play a sound to confirm.Was this helpful? Thank you for your feedback!
-
Press and hold the Phone and VOL + button simultaneously.
After 5 seconds, the unit powers Off, and is now reset.Was this helpful? Thank you for your feedback! -
Press and hold the 'Volume +' and 'Bluetooth' buttons simultaneously for > 2 seconds (> 5 seconds for the Onyx Studio 8), until the speaker powers off.
The Onyx Studio is now reset to factory settings.Was this helpful? Thank you for your feedback! -
Resetting the SOUNDSTICKS 4 to Factory Settings
- The unit must be on
- Press and hold Power and Bluetooth buttons for > 10 seconds
- The unit is reset
Was this helpful? Thank you for your feedback! -
On the bottom of your ADAPT+ there is a reset button. Hold it down for 5 seconds, until the round button LED lights up in white. The product is now reset and ready to be set up again.Was this helpful? Thank you for your feedback!
-
Resetting the device
- In any source mode, press and hold the power button
and Source button
for 5 seconds.
- When the factory settings restore is complete, the soundbar automatically turns off and restarts.
- You can now set it up via Google Home app
again or connect any new Bluetooth devices.
Was this helpful? Thank you for your feedback! - In any source mode, press and hold the power button
-
1. Power on the Enchant 800 or Enchant 1300 Soundbar. 2. In any source mode, press the power and source button for 5 seconds. 3. The Enchant 800 or Enchant 1300 will power off automatically and turn on again. 4. Your device is now reset back to default Factory settings. 5. You can now redo the setup through the Google Home app or pair with a new smartphone or tablet.Was this helpful? Thank you for your feedback!
-
What you need first
- A Harman/Kardon Enchant Soundbar (1300 or 800 model).
- Latest version of the Google Home app
- A mobile device or tablet with Android or iOS system.
- An internet connection.
- Dual-band router with 2.4GHz and 5GHz connection
Adding your Enchant soundbar to your Wi-Fi
- Open the Google Home app
- Click on "ADD" to connect your Enchant 800 or Enchant 1300 Soundbar to your Wi-Fi network.
- Follow the instructions on screen and enjoy beautiful sound using Chromecast technology.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call us
Talk to a product expert
Call us now at:
(800) 422-8027
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)
Chat with us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)