How To
How To
-
Yes, When connected by Bluetooth from an iOS or Android device, pressing and holding the Bluetooth button for more than 2 seconds on the Aura Studio 2, the Voice Command will open ( iOS > Siri, Android > Google Now )Was this helpful? Thank you for your feedback!
-
Yes, The Harman Kardon Aura Studio supports Social mode. With this feature, you can connect up to 3 mobile devices simultaneously by Bluetooth. The last device to start playback will take over.Was this helpful? Thank you for your feedback!
-
The product does not have a built-in voice assistant. However, the product works with other voice-enabled products supporting Google Voice Assistant or Amazon Alexa.Was this helpful? Thank you for your feedback!
-
No, the Citation speaker does not store any conversations, it listens only for a few seconds and then deletes the file. Only when using "OK, Google" or "Hey, Google" will it start recording your question in order for Google Assistant to fulfill your request. You can always delete all your recordings via "My activity" settings under your Google Account.Was this helpful? Thank you for your feedback!
-
No this case is only made to fit Esquire 2Was this helpful? Thank you for your feedback!
-
The Harman/Kardon SB20 is an easy connectable soundbar for your TV. It only has outputs for TV connection, and we advise to connect all other HDMI sources to your TV instead.Was this helpful? Thank you for your feedback!
-
Harman Kardon Allure/portable will only work in selected countries such as United States, Germany, United Kingdom and soon France. To use the Allure on your network requires two different apps. 1. HK Alexa setup - To connect it to your Wi-Fi network (Only available in the countries above) 2. Amazon Alexa app - To control Alexa and add streaming services to your Allure speaker. However, in some countries, French, German or English is spoken, but you still cannot use the Allure, because the Amazon Alexa app cannot be downloaded. This is a decision made by Amazon. The Alexa app is only available in some countries, and this is not only dependent on language. Therefore, if you plan on buying an Allure speaker, and have it shipped to a country outside the selected regions, you will not be able to use it on Wi-Fi, and Alexa voice commands will not work. Only Amazon knows if and when they will extend the app availability to more countries.Was this helpful? Thank you for your feedback!
-
No, this feature is not supported in our Harman Kardon Allure speaker. This might change with future updates. You can write text messages to your Amazon friends via the Alexa app.Was this helpful? Thank you for your feedback!
-
No, since the OMNI BAR+ does not have any HDMI input connections, it is only your source, connected to the TV, (and of course your TV) that need to be 4K compatible.Was this helpful? Thank you for your feedback!
-
Yes, press and hold the Surround button on the OMNI BAR+ until it starts to blink amber. You are now in pairing mode. Press Volume+ on your OMNI BAR+, then press Volume+ on your remote control. The surround button will quickly flash white, to indicate it has learned Volume+. Repeat for Volume-, and Mute, and then hold down the Surround button to exit remote control learning.Was this helpful? Thank you for your feedback!
-
No, the HDMI connection is used for audio return channel only, there is no on-screen display function to show settings on the TV screen.Was this helpful? Thank you for your feedback!
-
Yes, this headphone features a one button microphone that gives you the ability to pause/play, skip tracks, and answer/hang up phone calls.Was this helpful? Thank you for your feedback!
-
This speaker supports both Samsung Bixby and Amazon Alexa voice assistant. You have the ability to setup both voice assistants and run both of them concurrently.
Was this helpful? Thank you for your feedback! -
You will not be charged for ground shipping. Expedited shipping costs are based upon total weight and service availability.Was this helpful? Thank you for your feedback!
-
No, the ALLURE PORTABLE has a Micro USB charging port on it, so you can charge it without the docking station using any USB charger with a charge rating of 2.3 amps or higher. A charger with a slightly lower rating, below 2.3 amps, will also work, but the charging time will increase.Was this helpful? Thank you for your feedback!
-
No, simply turn on your AVR device and make sure it is connected to your network and the mobile device is on the same network. Open your Spotify app and select the Spotify Connect logo, and your AVR device should be visible. Select the AVR device and play Spotify music through your system.Was this helpful? Thank you for your feedback!
-
We do not ship internationally.Was this helpful? Thank you for your feedback!
-
Every home is different, so it is difficult to provide a universal guide that suits it all. What you can do is check the number of available access points in your home by performing a Wi-Fi network scan using a mobile device. Then select the Wi-Fi channel that isn't as busy as the rest. Also, check how much noise each speaker has using the Harman Kardon Controller app. Simply go into the settings menu and select "Send us feedback" to see the results, signals between -40 dB and -62 dB are considered good.Was this helpful? Thank you for your feedback!
-
Yes, a phone with GPS capabilities is needed so that the Vi Fitness app can start and stop workouts, track biometrics, measure and store data, track features like elevation and location, and play music during training. We support iOS (9+) and Android OS (Lollipop +) devices however we recommend having the latest OS on any device for the best Vi experience.Was this helpful? Thank you for your feedback!
-
The Onyx Studio 7 features Dual Wireless Sound which allows you to connect two Onyx Studio 7 speakers together for a more powerful listening experience. Please note: You cannot connect the Onyx Studio 7 to other Onyx Studio speakers such as the Onyx Studio 6 and 5.Was this helpful? Thank you for your feedback!
-
It's normal that music will be interrupted for one or two seconds when entering Wireless Dual Sound mode. The two compatible speakers are synchronizing with each other during this connection process. Once they are in sync you will not experience any further interruption.Was this helpful? Thank you for your feedback!
-
The SmartThings app works with Alexa and can be used to control compatible products such as light bulbs, on/off switches, dimmer switches, thermostats, locks, and Scenes configured with the SmartThings app. To use your speaker to control these smart devices, follow these steps:
- Go to the speaker's page in the SmartThings app.
- Select Menu (3 dots on the top right corner).
- Select "Settings".
- Select "SmartThings with Alexa".
- Tap "Allow" to let Alexa to access all your compatible home devices.
- Select "Link".
- Tap "Done".
Was this helpful? Thank you for your feedback! -
ENCHANT 1100
Software Update Release Notes
------------------------------------------------------------------------
Version: 24.50.65.90.00
Release Date: January 20th, 2025
Release Media: OTA (over the air) Automatic Update through HK One App
What’s New
- Increase EQ to 7 bands
- Improved software performance
Was this helpful? Thank you for your feedback! -
ENCHANT 900
Software Update Release Notes
------------------------------------------------------------------------
Version: 24.50.65.90.00
Release Date: January 20th, 2025
Release Media: OTA (over the air) Automatic Update through HK One App
What’s New
- Increase EQ to 7 bands
- Improved software performance
Was this helpful? Thank you for your feedback! -
ENCHANT SPEAKER
Software Update Release Notes
------------------------------------------------------------------------
Version: 24.50.65.65.00
Release Date: January 20th, 2025
Release Media: OTA (over the air) Automatic Update through HK One App
What’s New
- Add Auracast support using HK One App
- Increase EQ to 7 bands
- Improved software performance
Was this helpful? Thank you for your feedback! -
ENCHANT SUB
Software Update Release Notes
------------------------------------------------------------------------
Version: 24.51.11.75.00
Release Date: January 20th, 2025
Release Media: OTA (over the air) Automatic Update through HK One App
What’s New
- Improved software performance
Was this helpful? Thank you for your feedback! -
To reset the device to its factory settings:
Power on the speaker. While on, press and hold the power button down for 15-20 seconds until the speaker turns off.
Now that the speaker has been reset, make sure to remove it from your BT settings if it was once paired to other devices as the BT memory has been reset as well. Once you turn the speaker on again, it should automatically enter into pairing mode with a flashing LED. It should pop up on your discoverable devices under your BT settings and connect within a few seconds.Was this helpful? Thank you for your feedback! -
To reset your speaker to its factory settings, press and hold the Bluetooth and Vol + buttons for at least 10 seconds. The LED will emit a constant amber color until the reset is completed.
Was this helpful? Thank you for your feedback! -
As of December 1, 2022, Google Assistant on third party smart displays, soundbars, and speakers are no longer able to make a voice call to a landline or mobile number on the carrier network. Voice-over-IP calls continue to work. This is due to the ongoing infrastructure improvements.
Please click here to see Google’s official statement/article explaining this.
Was this helpful? Thank you for your feedback! -
The Citation Amp works with Chromecast built-in (audio only), and also works with Hey Google products. For example, you can use voice commands to tell your other Google speakers to play music on Citation Amp. Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call us
Talk to a product expert
Call us now at:
(800) 422-8027
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)
Chat with us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)