How To
How To
503 results
-
Please make sure that your BDS is connected to the home network router also used by your smartphone.Was this helpful? Thank you for your feedback!
-
Please place your AVR in full Standby by holding the Power Button for at least three seconds. Now, when you switch it ON again, the problem should have disappeared. Please note that Sleep Mode is not sufficient, you must use full Standby.Was this helpful? Thank you for your feedback!
-
Please make sure that if you use 5GHz or 2.4GHz Wi-Fi, all your speakers are connected to either 2.4GHz or all are connected to 5GHz Wi-Fi to have the best performance.Was this helpful? Thank you for your feedback!
-
The first 105 files are registered right away. If you know that you have more files in the DLNA system, wait for close to a minute, while the BDS -75 / -77 registers the additional files. After a short while, it will begin counting until all files are registered, or until the maximum of 2000 files is reached.Was this helpful? Thank you for your feedback!
-
No, the Bluetooth name is fixed and not changeable. If you have multiple ESQUIRE2 in your Bluetooth list, and when activating one of them, it should be the "first" on your Bluetooth list.Was this helpful? Thank you for your feedback!
-
The ALLURE PORTABLE is not constantly looking for a wi-fi system. When you turn the unit on, it finds the wi-fi, connects, and begins working. When you move into another section with a different router, the ALLURE PORTABLE will no longer be connected. You will have to turn the ALLURE PORTABLE off and then back on again, so that it can find it's new wi-fi router.Was this helpful? Thank you for your feedback!
-
Please note that the AUX source supports a variety of input connections. By pressing the AUX button on the remote several times, the input toggles between the different audio inputs. Please press the remote control AUX button repeatedly, until the front display shows the correct input source. This should set the AUX input correctly, and you should have audio back in your speakers, to let you enjoy your Harman Kardon system.Was this helpful? Thank you for your feedback!
-
Make sure your WiFi extender's name is not the same as that of your main WiFi network. Please use 5 GHz WiFi extenders only for best performance.Was this helpful? Thank you for your feedback!
-
If you have updated the unit from a USB stick, performed a reset procedure and removed power from the unit completely for at least 10 seconds, and the BDS still does not work, please repeat the update process. You may want to re-download the update file as well. This should solve the issue, and we are sorry for this inconvenience.Was this helpful? Thank you for your feedback!
-
To use our ESQUIRE2 with your Windows system, you'll need to find a Bluetooth driver that supports A2DP Audio codec. HARMAN do not have these and therefore you will need to contact your PC manufacturer.Was this helpful? Thank you for your feedback!
-
The HKTS 65 is a new version of the HKTS 60, with minor improvements. Please select HKTS 60 in the menu.Was this helpful? Thank you for your feedback!
-
Harman Kardon Invoke
Final Software Update release notes
Release date: September 8, 2021Software version 12.2314.0 Release media Via USB software flash tool as provided by Harman Customer Service What’s New: - Fixed a pop noise sound when you play/pause the music.
- Fixed an issue where Bluetooth pairing is always available without pressing the Bluetooth button.
- Enable factory reset via the reset pinhole next to the microphone mute button. For example, use a paperclip, press and hold the button for 5 seconds to reset your Invoke speaker.
- Other minor bug fixes and improvements.
There are two ways to perform this update.
Option 1 (recommended): Do It Yourself Update
Estimated Time: 15-20 minutes
Cost: Free
Download Link: Harman Kardon INVOKE Driver & OTA2 (220meg)
- Download the zip file from the link above.
- Unzip/Extract the entire contents of the zip file.
- Read through the instructions (OTA2.pdf) before performing the update to familiarize yourself with the procedure.
- Process 1: Install the driver in your Windows 10 computer so that it can recognize and communicate with your INVOKE.
- NOTE: This is not possible on computers that use BitLocker or other corporate encryption tools. Use a personal computer that does not use advanced encryption.
- Process 2: Install the update on your INVOKE via your Windows 10 computer.
OPTION 2: Factory Update
Estimated Time: 2-6 weeks
Cost: Shipping charges from your location to City Of Industry, California
Form Link: Sofware Update Request Form
- Click on the link above.
- Fill out the online form.
- Select INVOKE in the Product field.
- Type “Software Update Request” in the Description Of Issue/Problem field.
- Click Submit.
- Wait to receive an email within 48 hours with instructions for shipping back your unit.
- Please note that you are responsible for carefully packing your INVOKE and all shipping charges.
- Harman will update your product and send it back to you within 2-6 weeks.
Was this helpful? Thank you for your feedback! -
Was this helpful? Thank you for your feedback!
-
Our A2DP profile only support SBC Codec for ESQUIRE 2.Was this helpful? Thank you for your feedback!
-
Yes, but only with power on the Adapt. When it senses a signal on the analog aux input, the input ring will light up green automatically, and the signal will become available from the line output, for transmission with cable to e.g. an amplifier. It is important to note that there will be a slight delay in the signal that comes out of the line output jack, even if it does not involve any wireless functions.Was this helpful? Thank you for your feedback!
-
If your device is capable of seeing AURA as an AirPlay unit, it will also be available as DLNA device, as AURA needs to be connected to your network for it to work as DLNA/AirPlay unit. Make sure your devices are on the same network.Was this helpful? Thank you for your feedback!
-
Current AURA customers will be able to upgrade your speaker to support Spotify Connect. Simply use the HK Remote app, as it will be OTA update. Otherwise, contact our helpdesk for help.Was this helpful? Thank you for your feedback!
-
Yes. This product has a rechargeable battery, handle for carrying and feet to stand.Was this helpful? Thank you for your feedback!
-
Yes, in the Harman Kardon Remote APP, it is possible to change the AURA's Bluetooth name.Was this helpful? Thank you for your feedback!
-
Yes, on your computer, enter the IP address of the receiver in the internet browser. In the page that opens, it is possible to change the name.Was this helpful? Thank you for your feedback!
-
Yes, when the Esquire 2 is switched ON, it can charge a smartphone or tablet (or other USB-chargeable device that matches) through the special USB port. This function is available both when Esquire 2 is running on battery, and when connected to a charging port itself.Was this helpful? Thank you for your feedback!
-
It is not possible to clean the clear dome of the AURA. The dome cannot be removed without damaging the product. The only solution if debris falls into the AURA is to try to shake it out through the bass tube. We cannot recommend using a vacuum cleaner to suck or blow through the bass tube.Was this helpful? Thank you for your feedback!
-
No, it only supports one Bluetooth connection. Simply disconnect the paired phone/tablet from your Bluetooth device settings, then hold down the Bluetooth button for 3 seconds, and then you are able to pair with the new smartphone/tablet.Was this helpful? Thank you for your feedback!
-
No, your USB device has to be formatted FAT32, which a smartphone device cannot be.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call us
Talk to a product expert
Call us now at:
(800) 422-8027
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)
Chat with us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)