How To

Support Overview / How To

How To

503 results
  • TWS Left & Right Not Pairing Together
    The two earpieces of your TWS headphones should normally be connected together without issue.  However, if they are no longer paired to each other, please follow these steps, in order.
    1. Forget/unpair the headphones on your device.
    2. Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
    3. Pair the headphones to your device and see if this resolves the problem.
    4. If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
    5. Initiate a Product Reset to reset the earbud’s Bluetooth connection.
      • Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
      • Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
      • Manually pair the 2 buds together again, as you did in step 2.  This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
      • Pair the buds to your Source Device.
  • Using a wireless subwoofer
    It is possible to connect a wireless Citation Sub or Sub S to the Citation Amp.
  • Using Chromecast with my SmartThings compatible speaker

    To use Chromecast on a SmartThings compatible speaker, proceed with the following steps:

    1. Go to the speaker's page in the SmartThings app.
    2. Go to "Third Party Services".
    3. Tap "Chromecast built-in".
    4. Tap "enable".
    5. Open a Chromecast enabled app on your smartphone or tablet.
    6. Play music.
    7. Press the Chromecast icon.
    8. Select the Chromecast compatible speaker.
  • Using HDMI, Optical and Coaxial digital inputs
    The TV input is a single audio input with different options for connectors. If an HDMI cable is connected, then it will always be prioritized. Optical and coaxial digital will be prioritized by first signal present (Be aware, that some optical outputs will register as signal always)
    It is not possible to change between the digital inputs for TV source via the remote control. 
  • Using my receiver, the picture on my TV is slightly out of sync with the audio. What's wrong?
    This receiver has a feature called "A/V Sync Delay" that allows you to manually set dissimilar video and audio synchronization that may occur with certain types of Plasma and HDTV's. The instruction for this setting can be found in your owner's manual in the section "Delay Adjustments" or "Delay Settings".
  • Using speakers with 4 ohm impedance
    The Citation Amp can work with 4 ohm speakers and is rated at 200-watts per channel. Do not connect speakers less than 4 ohm!
  • Using the Trigger out 12V connection
    You can use a 3.5 mini-jack cable to connect the Citation Amp (TRIGGER OUT 12V) with your subwoofer or other equipment to have them power on when the Citation Amp wakes from standby.
    When the Citation Amp is ON, there will be output 12V DC signal, and when the Citation Amp is OFF  mode, there is no output (0V DC).
  • Voice control
    Even though the Google Assistant is not built-in, Harman Kardon Radiance 2400 is compatible with a voice-assistant speaker, like the Harman Kardon Citation Series.
  • Waterproof Information
    This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.
  • Waterproof Information (IPX7)

    This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.

    IPX7-icon.png
  • What activities does Vi help you train for?
    Vi currently includes support for indoor/outdoor Walking, Jogging, Running, Sprinting, HIIT Runs and Cycling. Our supported activities will continue expanding every few months.
  • What are refurbished products?

    Refurbished products in our "Outlet" menu are products that have been returned to us by our dealers, retailers or customers within the 30-day return period.

     

    These products have been thoroughly checked and tested to meet the high standards that are set by HARMAN. A refurbished product contains the same features and functionalities as a new model. You may see some minor cosmetic imperfections, and perhaps the product has been repackaged in none-branded packaging, but you can be assured that these products will perform perfectly.

     

    A refurbished product is covered by our 30-day return period and the same warranty conditions as with a similar new product. Voucher codes cannot be used to purchase refurbished Harman products unless the promotion explicitly states otherwise.

     

    I can be that a refurbished product temporarily will have a sales price that is equivalent to or even exceeds the price a similar new product, if the new product is on sale.

< 1 ... 33 34 35 36 37 ... 42 >

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: (800) 422-8027

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

Chat with us

Chat with us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)