Documents & Downloads
Product Specifications
- Power Requirements
- AC 120V/60Hz
- Power Consumption
- 125W idle, 1100W maximum (2 channels driven)
- MSRP U.S.
- $1799.95 each
- Continuous Average Power (FTC) per Channel (stereo mode)
- 110 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
- Amplifier Power (RMS)
- Center channel... 100 Watts @ < 0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
- Amplifier Power (RMS)
- Front L&R channels... 100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
- Amplifier Power (RMS)
- Surround channels... 100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
- High Instantaneous Current Capability (HCC)
- ± 75 Amps
- Input Level/Impedance
- 200mV/47k ohms - Linear (High-Level)
- Signal-to-Noise Ratio
- 95dB (IHF-A)
- Surround System Adjacent Channel Separation
- Analog Decoding(Pro Logic, etc.)... 40dB Dolby Digital (AC-3)... 55dB DTS Mode... 55db
- Frequency Response
- 10Hz – 100kHz (+0/-3dB @ 1 watt)
- Transient Intermodulation Distortion (TIM)
- unmeasureable
- Rise Time
- 16µsec
- Slew Rate
- 40V/µsec
- Surround Modes
- Dolby Digital and DTS surround, Harman Kardon's VMAx virtual surround sound
- Digital Inputs
- 4
- Digital Outputs
- 2
- Width
- 17-5/16 inch (440mm)
- Height
- 7-5/8 inch (193mm)
- Depth
- 20-7/16 inch (519mm)
- Weight
- 49 lb (22.3kg)
- Video Formats
- NTSC
- Input Level/Impedance
- 1Vp-p/ 75ohms
- Output Level/Impedance
- 1V/75 ohms
- Video Frequency Response
- 5Hz–10MHz (-3db)
- Frequency Range
- FM... 87.5 – 108MHz
- Signal-to-Noise Ratio
- FM... 70dB (mono)
- Signal-to-Noise Ratio
- FM... 68dB (stereo)
- Distortion (Mono/Stereo)
- FM... 0.2%/0.3%
- Stereo Separation
- FM... 40dB @ 1kHz
- Selectivity
- FM... ± 400kHz, 65dB
- Image Rejection
- FM... 80dB
- IF Rejection
- FM... 90dB
- Tuner Output Level
- FM... 1kHz, ±75kHzDev 500mV
- Frequency Range
- AM... 520 – 1710kHz
- Signal-to-Noise Ratio
- AM... 45dB (IHF-A)
- Usable Sensitivity
- AM... Loop 500µV
- Distortion
- AM... 1kHz, 50% Mod 0.8%
- Selectivity
- AM... ± 10kHz, 30dB
High-current(+/-75 Amps), ultrawide-bandwidth(10Hz - 115kHz)amplifier effortlessly powers the most dynamic digital sources. Dual, matched discrete output devices for each channel. Massive torroidal power transformer. Dolby Digital and DTS surround-sound processing using advanced Crystal DSP engine. Factory remanufactured.
FAQs & How-Tos
1 results
-
The remote is only capable of operating one device at a time (unless you have programmed advanced functions such as Volume, Channel or Transport control Punch-Through). When you press the Source Selector to operate your other product, such as the DVD player, the remote cannot control any other product, including the AVR, until you press the AVR Button again. To avoid your problem in the future, always press the AVR Button or appropriate Source Selector before you enter any command.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(800) 422-8027
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)
Chat with Us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)