AVR 500

AVR 500

Audio/Video Receiver With Dolby Digital & DTS (80 watts x 2 | 70 watts x 5)

Sold from 1999 until 2000

Predecessor Product: AVR 65
Successor Product: AVR 510
Made in: Hong Kong

Documents & Downloads

Product Specifications

Power Requirements
120V AC/60Hz
Power Consumption
78W idle, 694W maximum (2 channels driven)
Surround System Adjacent Channel Separation
Pro Logic Decoding... 40dB
Surround System Adjacent Channel Separation
Dolby Digital... 55dB
Surround System Adjacent Channel Separation
DTS... 55dB
MSRP U.S.
$899.95 each
Surround Modes
Dolby Digital, DTS surround, Harman's VMAx
Digital Inputs (coaxial/optical)
4
Digital Output
2
Dimensions (H x W x D)
Width 17-5/16 inch (440mm)
Dimensions (H x W x D)
Height 6-1/2 inch (165mm) Height measurement includes feet and chassis.
Dimensions (H x W x D)
Depth 17-1/8 inch (435mm) Depth measurement includes knobs, buttons and terminal connections.
Weight
34lbs ( 15.5kg)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
10Hz – 8MHz
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3mu;V/13.2dB
Signal-to-Noise Ratio
FM... 70dB Mono ( measured at amV RF Input Level)
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Signal-to-Noise Ratio
FM... 68dB Stereo ( measured at amV RF Input Level)
Distortion (Mono/Stereo)
FM... 0.3%/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @1kHz
Selectivity
FM... ± 400kHz, 65dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Tuner Output Level
FM... 1kHz, ±75kHz Dev 500mV
Continuous Average Power (FTC) per Channel (stereo mode)
80 watts per channel @<0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms
Continuous Average Power (FTC) per Channel (surround modes)
70 watts per channel @<0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms
High Instantaneous Current Capability (HCC)
± 45 Amps
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB
Frequency Response
10Hz – 100kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Not Measurable
Rise Time
16µsec
Slew Rate
40V/µsec

High-Current (+/-45 Amps), Utrawide-Bandwidth (10Hz-100kHz) Amplifier Design. Dolby Digital and DTS Surround-Sound Processing Using Advanced Crystal DSP Engine. Harman Kardon Exclusive Logic 7 Cinema and Music Surround-Sound Processing. Prior season's model.

FAQs & How-Tos

1 results
  • The remote is only capable of operating one device at a time (unless you have programmed advanced functions such as Volume, Channel or Transport control Punch-Through). When you press the Source Selector to operate your other product, such as the DVD player, the remote cannot control any other product, including the AVR, until you press the AVR Button again. To avoid your problem in the future, always press the AVR Button or appropriate Source Selector before you enter any command.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (800) 422-8027

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

Chat with Us

Chat with Us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)