Support Overview / Home Audio / Receivers / Receivers - Surround Sound / AVR 155

AVR 155

5 x 40W 5.1-Channel A/V Receiver With HDMI; Switching

Product Specifications

General Specifications

Type: 5.1-Channel AVR

Continuous Average Power (FTC) per Channel (stereo mode): 50 x 2 / 20Hz – 20kHz, 8 ohms, both channels driven

Continuous Average Power (FTC) per Channel (surround modes): 40 x 5 / 20Hz – 20kHz, 8 ohms, all channels driven

Amplifier Type: High-Current ±25 amps

Total Harmonic Distortion: 0.07% @ 8 ohms

Bandwidth: 20Hz – 20kHz

Bandwidth @ 1W (-3dB): 10Hz – 130kHz

Signal-to-Noise Ratio: 100dB (IHF-A)

Power Supply: Independent front & rear

Surround Modes: Dolby Digital, Pro Logic II, Dolby Virtual Speaker, DTS 5.1, DTS-ES 6.1 Discrete & Matrix, DTS 96/24, DTS Neo...6, Logic 7

Headphone Modes: 2-Channel, Dolby HP

EzSet: EzSet/EQ

S-Video/Component Video Inputs: 4

Analog Audio Inputs: 6

Digital Audio Inputs: Rear panel 2 coax / 2 optical

Digital Audio Inputs: Front panel 1 coax / 1 optical

Digital Audio Outputs (Coax/Optical): Rear panel 1/0

Digital Input Polling: All video inputs

Direct Audio Inputs: 5.1

HDMI: 1.3a Switching

HDMI: Inputs... 3

HDMI: Output... 1

Preamp Outputs: Subwoofer

Component Video Inputs (Assignable): 2 @ 100MHz

On-Screen Display: Yes

Input Titling: All inputs

DSP Processor: Cirrus CS 49510

Output DACs: 192kHz/24-bit

A/V Sync Delay: 80mS

Bass Management: Triple crossover

System Remote: 6-Device preprogrammed

Discrete Remote On/Off Codes: Yes

Speaker Terminals: Color-coded binding posts

Dimensions

Weight: 11.1kg

Dimensions (H x W x D): 151mm x 440mm x 351mm

The AVR 155 is all about getting connected. It features three HDMI; inputs, two wide bandwidth HDTV-ready component video inputs, four S-video inputs, a front-panel input for video games, an auxiliary input for portable media players, and a portfolio of advanced surround processing technologies, including Dolby Digital, DTS and Logic 7 processing. But the AVR 155 is also about ease of use, with EzSet/EQ; equalization for quick system setup and color-coded inputs.