HK 3490

HK 3490

Stereo Receiver (120 watts x 2)

Sold from 2008 until now

Predecessor Product: HK 3485
Made in: China

Documents & Downloads

Product Specifications

Detachable IEC Power Cord
382
Power Consumption (full power/idle)
less than 1W standby, 310W maximum (both channels driven)
Power Requirements
AC 120V/60Hz
Power Consumption
<1W standby, 310W maximum (both channels driven)
Digital Inputs (coaxial/optical)
1/1
Analog Inputs
1 A/V on front panel
Analog Inputs
3 A/V on rear panel
Analog Inputs
3 audio-only
Analog Inputs
The Bridge/DMP
Analog Inputs
tuner
On-Screen Display
No
Multizone Capability
Speaker 1/2 switch
Remote Control
Five-device system remote
Shipping Weight (System, Accessories, Packing)
27.3 lb (12.4kg)
MSRP U.S.
$499.95 each
Input Sensitivity/Impedance
Linear (High-Level)
Signal-to-noise Ratio (IHF-A)
95dB
High Instantaneous Current Capability
±45 Amps
Slew Rate
40V/sec
# of Amplifier Channels
2
Stereo Mode:
Continuous Average Power (FTC) per Channel
120 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms
Continuous Average Power (FTC) per Channel
150 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB (IHF-A)
Frequency Response
10Hz – 110kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Rise Time
16 µsec
Slew Rate
40V/usec
Height (mm)
163
Depth (mm)
15
Height (in)
6-3/8
Width (in)
17-3/8
Width (mm)
442
Width
17-3/8 inch (442mm)
Height
6-3/8 inch (163mm)
Depth
15 inch (382mm)
Weight
23 lb (10.4kg)
Dimensions:
Carton Dimensions
22 inch W x 10-5/8 inch H x 18-15/16 inch D (560mm x 270mm x 465mm)
Television Format
NTSC/PAL/SECAM
Signal Format
Composite
Input Level
1Vp-p
Sync Polarity
Negative
Video Frequency Response
10Hz – 10MHz
Signal Format System
Composite
Input Level/Impedance
1Vp-p/75 ohms, unbalanced
Output Level/Impedance
1V/75 ohms, unbalanced
Frequency Range
AM... 520 – 1720kHz
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
AM... >40dB
Usable Sensitivity
FM... IHF 1.3µV/13.5dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 73/72dB
Usable Sensitivity
AM... Loop 500µV/M
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.3/0.4%
Selectivity
AM... ± 10kHz, >25dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 65dB
Image Rejection
FM... >80dB
IF Rejection
FM... >100dB
Tuner Output Level
FM... 1kHz, ±100kHz, Dev 500mV
Power Requirement
AC 120V/60Hz
Amplifier Power (RMS)
120 x 2 @ 8 ohms, (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 45 Amps

The insanely powerful Harman Kardon HK 3490 combines all of an audiophile's must-haves (high-performance phono preamp, preout/main-in jacks, high-current amplification) with an array of multichannel extras (digitial-audio inputs, video switching, dual subwoofer outputs and Dolby Virtual Speaker technology). Add The Bridge II docking station, and the HK 3490 will connect as elegantly to your newfangled iPod as it does to your time-honored turntable. The HK 3490 isn't a snob about where the music comes from, as long as it sounds great when it reaches its final destination &mdash; your ears. Bridge II is compatible with this model.

By leveraging high-current capability (HCC), the HK 3490’s 120-watt-per-channel, integrated amplifier maintains the instantaneous current required to drive nearly any loudspeaker system, delivering dynamic peaks, tight bass and superb transient response at any volume level.
The HK 3490 fuses many appealing exterior ingredients to evoke architectural excellence. A dot-matrix display with easy-to-read navigation menus relays artist information, track numbers and volume levels.
In addition to direct-access tuning and the 30 station presets available for the FM/AM tuner with RDS (Radio Data System), the HK 3490 receiver includes an XM-ready tuner that operates with an XM antenna module (sold separately) for home use. XM radio lets you access additional stations with exclusive satellite-radio content, much of which is commercial-free.
The optional The Bridge II docking station (sold separately) works with an iPod or iPhone player to expand your entertainment options. Once connected, The Bridge II even charges your Apple device and works seamlessly with the HK 3490’s system remote control to navigate and play your favorite music tracks.
Dolby Virtual Speaker mode simulates a realistic, 5.1-channel surround-sound experience from just two speakers. In addition, Dolby Headphone technology recreates a rich audio soundstage using your conventional stereo headphones.
A high-quality phono input enables connection to record players fitted with an MM (moving magnet) cartridge to breathe new life into your vinyl collection of LPs and 45s, letting you hear all those classic albums and singles in the best audio quality.
By switching easily between A/B speakers, the HK 3490 conveniently lets you hear audio playback in more than one room at a time.
The HK 3490 features three audio-only inputs, two analog-recording outputs (tape and video), four A/V inputs with composite video (including one on the front panel for video games or portable audio players), a composite-video monitor output and two digital-audio inputs (one coaxial and the other optical). Stereo pre-amp outputs let you connect the receiver to an external power amplifier.
A seven-device, programmable system remote control is capable of directing your TV, cable boxes, satellite tuners and home theater system. Using the receiver’s multilingual, on-screen display, the remote guides you seamlessly through system setup.

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: (800) 422-8027

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

Chat with us

Chat with us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)