PA 2000

PA 2000

4-Channel Power Amplifier (45 watts x 4 | 100 watts x 2)

Sold from 2000 until 2004

Made in: South Korea

Documents & Downloads

Product Specifications

Power Output, Normal Mode
4 x 45 Watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven
Power Output, Bridged Mode
2 x 100 Watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven
Frequency Response
<1Hz – 170kHz (-3dB @ 1 watt)
Signal-to-Noise Ratio
110dB @ Rated power 45 watts
Total Harmonic Distortion
Less than 0.07% @ rated output
Power Bandwidth
<1Hz – 100kHz
Input Impedance
47k ohms
Input Sensitivity
1 Volt for rated output
Remote Trigger Voltage
3 – 30 Volts AC/DC
Remote Trigger Impedance
20k ohms
Power Requirements
AC 120V/50 – 60Hz
Power Consumption
260 Watts maximum
MSRP U.S.
$599.95 each
Weight
25.3 lb (11.4kg)
Dimensions (H x W x D)
6-1/8 inch x 17-3/8 inch x 15-3/4 inch (155mm x 442mm x 400mm)
High Instantaneous Current Capability (HCC)
± 45 Amps

Add remote rooms or additional channels to an existing surround system with this high-current, bridgeable amplifier. Fan-free for ultraquiet operation, the PA 2000's design is optimized for the requirements of the long signal paths found in multiroom systems.

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: (800) 422-8027

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

Chat with us

Chat with us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)