AVR 171S
700-watt, 7.2-channel, networked AVR with AirPlay and Bluetooth connectivity
Getting started with your AVR 171S
Documents & Downloads
Product Specifications
- Power Requirement
- 220V - 240V AC, 50Hz/60Hz
- Dimensions (H x W x D – Metric/English)
- 133mm x 440mm x 300mm (4-3/4” x 17-5/16” x 11-13/16”)
- Weight (Metric/English)
- 5.1 kg (11 lb)
- Stereo Power
- 100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz,
- Multichannel Power (one channel driven)
- 100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz,
- High Instantaneous Current Capability
- 42 Amps
- Signal-to-noise Ratio (IHF-A)
- 100 dB
- Slew Rate
- 40V/sec
- Input Sensitivity/Impedance
- 250mV/27k ohms
- Television Format
- PAL
- Input Level/Impedance
- 1Vp-p/75 ohms
- Output Level/Impedance
- 1Vp-p/75 ohms
- Video Frequency Response (Component Video)
- 10Hz – 8MHz (–3dB)
- HDMI Version
- 2.0 + 3D ready
High-performance audio/video receiver that boasts multiple wireless connectivity options, six HDMI inputs and 700 watts of beautiful sound. Power, performance and more connectivity options than you’ll ever need: Introducing the Harman Kardon® networked AVR 171S, the answer to any entertainment enthusiast’s hunger for performance and versatility. It’s got muscle: up to 700 watts (100 watts per channel). Its 7.2-channel A/V receiver is equipped with HARMAN TrueStream Bluetooth® connectivity, Apple AirPlay, vTuner™ Internet radio and Spotify Connect, giving you multiple options for streaming audio. And with six 3D-ready HDMI® 2.0 inputs, including one equipped for MHL to connect mobile devices, and two HDMI outputs, you’ll have more than enough ways to connect to everything you love – movies, HDTV, sports, MHL-equipped devices and the Roku Streaming Stick™ dongle. While the AVR 171’s connectivity alone makes it desirable, its sound really strikes a chord. It’s the first Harman Kardon AVR to feature our exclusive Natural Sound Processing (NSP), which creates a rich, enveloping surround-sound from any source – particularly with two-channel streaming content. And its EzSet/EQ™ III system automatically calibrates the AVR to your speakers and listening environment. The AVR 171S is light, too, thanks to HARMAN GreenEdge™ certification – delivering all the power you need with low environmental impact. For those who want it all, the AVR 171S can’t be matched.
FAQs & How-Tos
-
Yes, this is correct. The AVR171, 171S, 1710 & 1710S only supports OSD on on the HDMI 1 output. HDMI 2 doesn't not show the OSD. The AVR370 and 3700 supports OSD on both HDMI outputs.Was this helpful? Thank you for your feedback!
-
Yes, this is correct. The AVR 1x1S does not support OSD on HDMI 2 out, only on HDMI 1.Was this helpful? Thank you for your feedback!
-
Yes, in the HDMI Setup Menu, it is possible to select either �Sound To TV� or �Sound To Amp�, Amp being the AVR. This detail is not mentioned in the owner's manual.Was this helpful? Thank you for your feedback!
-
Yes, download the Harman Kardon Remote app to do this.Was this helpful? Thank you for your feedback!
-
No, only analog audio sources are available for Zone II.Was this helpful? Thank you for your feedback!
-
No, simply turn on your AVR device and make sure it is connected to your network and the mobile device is on the same network. Open your Spotify app and select the Spotify Connect logo, and your AVR device should be visible. Select the AVR device and play Spotify music through your system.Was this helpful? Thank you for your feedback!
-
You can send any 4k video signal into the HDMI inputs of your AVR, and it will be sent to your TV screen from the HDMI output, either in 4k or 1080p. Sometimes it may be necessary to switch off the TV set, then switch it on again, to activate a new "handshake" between the devices, in order to open for the 4k signal, if normal HD 1080p signal was the last signal used. Please note that not all 4k signals can be viewed. Many streamed videos from Youtube will work, as will any 4k material that you have recorded yourself, and many TV boxes will work also. However, HDCP 2.2 protected material will not be shown in 4k, but will be converted to full HD 1080p signals, because these AVRs do not support HDCP 2.2 digital copy protection. HDR is not supported.Was this helpful? Thank you for your feedback!
-
The two subwoofer outputs are parallel, meaning that when changing subwoofer settings in the setup menu, both outputs will be adjusted. Establish the 7.2 system simply by adding a second subwoofer to an existing 7.1 system, connecting it to sub output 2.Was this helpful? Thank you for your feedback!
-
At the bottom of the Setup Source page for the specific source you are setting up you will find a field labeled Zone II Input or Zone II Audio Input. This is where you will assign the analog audio input that you will use for this particular source. The Zone II audio is strictly analog. So, for example, if you are planning to use your DVD player for the main room and Zone II, you will need to connect the DVD player to the AVR using both analog and digital connections, digital for the main room, and analog for Zone II.Was this helpful? Thank you for your feedback!
-
We designed the USB folder data to show the latest modified folder and it is a design preference. It is not possible to change this setting.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Talk to a product expert
Call us now at:
(800) 422-8027
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)
Chat with us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)