Harman Kardon Enchant 1300

Harman Kardon Enchant 1300

All in One 13-Channel Soundbar with MultiBeam™ Surround Sound

Getting started with your Harman Kardon Enchant 1300

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Maximum Audio Power
240W
RMS Power
120W
Standby Power Consumption
<2W
HDMI Video Inputs
3
HDMI Video Output(with Audio Return Channel)
1
HDMI HDCP Version
2.2
Bluetooth version
4.2
Bluetooth Profile
A2DP v1.3/AVRCP v1.5
Bluetooth Frequency Range
2402MHz-2480MHz
Bluetooth Transmitter modulation
GFSK, π/4 DQPSK, 8DPSK
2.4G Wireless Frequency Range
2403.35MHz-2477.35MHz
Note
The soundbar is intended to be used for streaming music. A consumer can stream Bluetooth audio to the soundbar. A consumer can connect their soundbar to the local Wi-Fi Network and stream music with Google Chromecast. In addition, the soundbar will work with Google Home. It is designed to be instantly on and ready to play music at a moment’s notice, therefore, the Bluetooth and Wi-Fi connection must remain active at all times to ensure proper operation. The soundbar is in compliance with the European Union energy legislation. The soundbar shall enter sleep mode (networked standby) through following
Frequency Response
70Hz-20kHz
Audio Channels
13
Operating temperature
0°C - 45°C
Max SPL
98dB SPL
Dimensions(W x H x D)
44" x 2.6" x 4.9" (1120 x 65 x 125mm)
Woofer Size
10 x 2" (50mm)
Tweeter Size
1 x 0.75" (20mm) 2 x 1" (25mm)

Surround yourself with sound. Not speakers.

Harman Kardon Enchant Series soundbars feature MultiBeam™, an exclusive technology that delivers a truly incredible surround sound experience without extra speakers or wires. Hear deep bass without the need of an additional subwoofer or choose for superior bass with the optional wireless Enchant Subwoofer. Thanks to Google Chromecast Built-in, you can stream high-quality music from over 200 streaming services with Wi-Fi. Equipped with HDMI connections and the latest 4K compatibility, the Harman Kardon Enchant Series soundbars are beautifully designed to be the entertainment hub for each of your 4K devices.

Get the full surround sound effect without the need for extra speakers and wires. Hear exciting sound details from your TV shows, music, games and movies flying around your room.
Enjoy deep bass and rich, full sound for your music, movies and games, all from a single soundbar without an extra subwoofer.
Conveniently stream your favorite music in high definition from over 200 online services through Wi-Fi without interruption.
Calibrate the soundbar with the best surround sound audio effect based on your own room design and layout.
Use your Enchant Series soundbar as the central entertainment hub for each of your 4K devices thanks to the HDMI connections with HDCP 2.2. HDMI ARC simplifies your setup with a single cable to the TV.
Conveniently control multiple soundbar audio settings with a press of a button.
Conveniently use your own TV remote control to command the soundbar.
Stream music wirelessly from your smartphone or tablet.

FAQs & How-Tos

16 results
  • HDMI Output

    Both Enchant 800 and Enchant 1300 support these:
    • HDMI 2.0b compliance
    • HDCP 2.2 compliance (Means it supports 4K Blue-Ray Movies or streaming clients with 4K encryption)
    • CEC features (Scroll to see support)

    HDMI Input

    Enchant features only 1 x HDMI input, and Enchant has 3 x HDMI inputs and support this:
    • HDMI 2.0b.
    • HDCP 2.2 for all HDMI input connections (Means it supports 4K Blue-Ray Movies or streaming clients with 4K encryption)
    • 4K Pass-through.

    CEC Support

    CEC support only available through your HDMI connection and we are always using standard protocol for our products.
    We support these:
    • System Standby: When you press the "Power off" button on your TV remote, the Enchant soundbar will go into Standby mode as well.
    • ARC or called Audio Return Channel: If you would have a TV BOX connected directly to your TV and using ARC from TV to Enchant soundbar, then all sound will be transferred through ARC connection.
      • In case you are not using the HDMI ARC connection then sound coming from the TV show will not be transferred to the Enchant soundbar.
    • System Audio Control: Using your TV remote to turn up or lower the volume will be synchronized with the Enchant soundbar.
    Both models
    Bigger model is the Enchant 1300 and smaller model is the Enchant 800.
  • Connecting a Bluetooth device for your Enchant Soundbar

    1. Make sure your Enchant soundbar is turned on by pressing the power buttonpower buttton
    2. There are two ways to enter Bluetooth pairing mode on your Enchant soundbar.
      1. Press the dedicated source button on top of your Enchant soundbar source
      2. Press the source button until you see "Bluetooth" in the front of the Enchant display. Below is the order when using the source button (note that on Enchant 800 there is only 1 HDMI)
                       selector button
    1. The second option is to use the Remote control included with your Enchant soundbar.
      1. Press the "BT" button on your Remote control.
      2. The display will show "Bluetooth pairing"
                           Remote control
    1. Now that your Enchant soundbar is in pairing mode it is now time to grab your mobile device.
    2. Go to Bluetooth settings.
    BT connection
    1. Press the enable Bluetooth button.
    Enable BT
    1. Select the Enchant soundbar and connect with Bluetooth.
    Bt connected


    You can now stream any music from your favorite device directly to the Enchant soundbar, ENJOY!
     
  • TV Connection HDMI (ARC)

      Back
    TV
    1. Connect your HDMI cable (included in the box) to your TV.
    2. Locate your TVs HDMI ARC (Audio Return Channel) port.
    3. Find the HDMI OUT on the back of your Enchant 800 or 1300 Soundbar.
    4. Now enjoy watching TV and listen to great audio through your Enchant soundbar.

    Optical connection
    optical con

    1. Connect your Optical cable (included in the box) to your TV.
    2. Find the Optical OUT connection on your TV.
    3. Locate the Optical IN on the back of your Enchant soundbar.
    4. Enjoy sound through the optical connection.

    Using the HDMI Inputs

    Other devices
    1. Find an HDMI Cable for your other devices.
    2. Use the HDMI inputs on the Enchant Soundbar.
      1. NOTE: Enchant 800 only have one HDMI input port and Enchant 1300 has three HDMI input ports.
    3. Switch source using your Remote control or pressing the source selector buttonspruce.
    4. The display on your Enchant device will show which HDMI input you are on.
    5. Enjoy watching or playing through your Enchant Soundbar.

     
  • How to pair an Enchant Subwoofer with your Enchant bar

    1. Go to the back of your Enchant soundbar (800 or 1300)
    2. Press the "Subwoofer pairing" button for 2 seconds.
    Subwoofer bar
    1. In front of your Enchant display, it will say "Subwoofer pairing"
    2. Go to the back of your Enchant subwoofer.
    3. Press the "Subwoofer pairing" button.
    SUB - pair
    1. The small LED indicator will start to flash rapidly and when the connection is successful, it will be a steady light.

    You now have more bass performance and can enjoy deeper richer sound!
  • 1. Power on your Enchant 800 or Enchant 1300 Soundbar. 2. There are two ways to enter Bluetooth pairing mode on your Enchant soundbar. 2.1. Press the dedicated source button on top of your Enchant soundbar source 2.2. Press the source button until you see "Bluetooth" in the front of the Enchant display. 3. The second option is to use the Remote control included with your Enchant soundbar. 4. Press the "BT" button on your Remote control. 5. The display will show "Bluetooth pairing". 6. Go to your Bluetooth settings menu on your mobile device. 7. Enable Bluetooth and connect to your Enchant 800 or Enchant 1300 Soundbar.
  • Resetting the device

    top panel
    1. In any source mode, press and hold the power button power and Source button source for 5 seconds.
    2. When the factory settings restore is complete, the soundbar automatically turns off and restarts.
    3. You can now set it up via Google Home app Google Home app again or connect any new Bluetooth devices.
  • 1. Power on the Enchant 800 or Enchant 1300 Soundbar. 2. In any source mode, press the power and source button for 5 seconds. 3. The Enchant 800 or Enchant 1300 will power off automatically and turn on again. 4. Your device is now reset back to default Factory settings. 5. You can now redo the setup through the Google Home app or pair with a new smartphone or tablet.
  • What you need first

    • A Harman/Kardon Enchant Soundbar (1300 or 800 model).
    enchant
    • Latest version of the Google Home appGoogle Home app
    • A mobile device or tablet with Android or iOS system.
    • An internet connection.
    • Dual-band router with 2.4GHz and 5GHz connection

    Adding your Enchant soundbar to your Wi-Fi

    1. Open the Google Home appGoogle Home app
           Google home
    1. Click on "ADD" to connect your Enchant 800 or Enchant 1300 Soundbar to your Wi-Fi network.
    2. Follow the instructions on screen and enjoy beautiful sound using Chromecast technology.


    Setup your enchant
  • Download the Google Home app, available for iOS and Android versions. 1. Open the Google Home app. 2. Plug in power for your Enchant 800 or Enchant 1300 Soundbar. 3. Enable Bluetooth. 3.1. Enable Location service on your phone and permit Google Home app to view your location (Android only). 4. Click setup device in your Google Home app. 5. Follow the instructions provided in the app, and enjoy Chromecast streaming for your Enchant soundbar!
  • Before you start

    • Remove any interference that might be blocking the Soundbar side-firing speakers.
    • Any ambient noise or sounds that could disrupt the calibration needs to be out of the room.
    • In case you are moving the Enchant Soundbar you will need to calibrate the sound again.
    • If something went wrong, you can always delete the calibration settings by resetting the system.
      • Press and hold Power - button and  Soruce button down for 5 seconds.
      • This will delete all settings, including the Wi-Fi connection.


    How to use the MultiBeam feature

    1. Press and hold the CALIBRATION iconbutton for 3 seconds.
      1. On the Enchant display a timer will start counting down from 3 to 0 (Once hitting 0 the Calibration will begin).
    Remote icon
    1. The calibration takes around 60 seconds before it is complete. While calibrating you will hear some noises coming from the speaker.
    2. When finished the display on the Enchant Soundbar will say "DONE"

     
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: (800) 422-8027

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

Chat with us

Chat with us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)