GO + PLAY {with ipod dock}

Made in:	China

Product Specifications

General Specifications

Transducer Power: 2 x 30 watts @ 1% THD

Woofer Power: 2 x 30 watts @ 1% THD

Voltage: Input

MSRP U.S.: $349.95 each

Audio Specifications

Frequency Response: 40Hz – 20kHz

Input Impedance: >10K ohms

Signal-to-Noise Ratio: >85dB

Dimensions

Height: 9-1/2" (240mm)

Width: 9" (230mm)

Depth 20" (500mm)

Weight: 8.6lb (3.9kg)

Understated, sublimely functional industrial design. Unsurpassed performance and ease of use. From its flat, protective iPod cradle and smart RF remote to its arching stainless-steel handle, this is the portable loudspeaker dock that only Harman Kardon® could build. Harman Kardon Go + Play™ delivers tight, thunderous bass from high-excursion low-frequency drivers. Just as important, the highs are distinct and crystal clear. Go + Play is AC- or battery-operated, so it will go anywhere your iPod or other music player goes – and make your favorite music sound better when it arrives. But however and wherever you use it, it’s the sound that sets Go + Play apart. Ipod is a registered trademark of Apple Computer, Inc.

Compatibility

Go + Play incorporates the Apple iPod Universal Dock adapter, and is compatible with most docking versions of the iPod. A stereo mini-jack connection allows you to enjoy high-quality audio from a variety of other devices, including the iPod shuffle, MP3 and CD players, desktop and laptop computers (all platforms), and satellite radio.

Full-Navigation Remote

The wireless RF remote control provides the freedom to enjoy your music from across the room or in another room, or outside, from up to 20 feet. With full access to your iPod you can easily change tracks, browse libraries, adjust settings, and scroll through extras.

Evercharge topology

Go + Play will charge your iPod without a computer connection, even when the system is off.

Touch controls

For convenient desktop use, Go + Play features one-touch volume and muting controls.

Advanced Technology

Go + Play owes its clear, accurate sound and outstanding performance characteristics to proprietary technologies developed specifically for the realities of multimedia sound.

Atlas™ and Ridge transducers

The dual Atlas woofers are capable of peak-to-peak performance travel of nearly an inch for tight, accurate amplification. DSP (Digital Signal Processing) equalization efficiently provides the Go + Play transducers with cool-running power.

FAQs & How-Tos

2 results

Sort

Page size

Are the legs adjustable?

If the Harman Kardon Go + Play is not stable or wobbles on a surface, one of the legs on the bottom of the speaker is adjustable with a Philips screwdriver. The adjustable leg is the one with a screw is in the center of the leg.

Was this helpful? Thank you for your feedback!
My Go+Play stands on three of its feet, so it is not stable. How can I make it stand firm on all four feet?

Fortunately the Go+Play in all versions is made with this problem in mind. One of the feet is adjustable. Look at the four feet. One is different from the others. You can insert a 3mm hex key into the center hole in it, then loosen the foot insert and unscrew it until the unit is steady. The adjustable insert may stick a little, so exert a steady, firm pressure to get it loose if this is the case.

Was this helpful? Thank you for your feedback!