PA 4000
8-Channel Power Amplifier (45 watts x 8 + 100 watts x 2 | 45 watts x 4 + 100 watts x 4)
Sold from 2001 until 2004
| Made in: | South Korea |
|---|
Documents & Downloads
Product Specifications
- Power Output, Normal Mode
- 8 x 45 Watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven
- Power Output, Bridged Mode
- (Bridged Mode 1)... 2 x 100 Watts plus 4 x 45 watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven
- Power Output, Bridged Mode
- (Bridged Mode 2)... 4 x 100 Watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven
- Frequency Response
- <1Hz – 200kHz (±3dB) @ 1 watt
- Signal-to-Noise Ratio
- 110dB @ rated power 45 watts
- Total Harmonic Distortion
- Less than 0.07% @ rated output
- Input Impedance
- 47K ohms
- Input Sensitivity
- 1 Volt for rated output
- Remote Trigger Voltage
- 3 – 30 Volts AC/DC
- Remote Trigger Impedance
- 20K ohms
- Keypad IR Sensor DC Supply
- 12V, 10mA
- Power Requirements
- AC 120V/50Hz – 60Hz
- Power Consumption
- 520 Watts maximum
- MSRP U.S.
- $899.95 each
- Weight
- 47 lb (21.4kg)
- Dimensions (H x W x D)
- 7-5/16 inch x 17-3/8 inch x 18-5/16 inch (185mm x 442mm x 465mm)
- High Instantaneous Current Capability (HCC)
- ± 45 Amps
Thanks to four bridgeable high-current amplifier pairs (a total of eight 45-watt channels) and two separate inputs, the PA 4000 is suited to a wide range of applications. Power two separate zones, or the back channels of a home theater and a remote zone simultaneously with ease, while a variety of power control options such as Music Sense and a low-voltage trigger make operation a breeze. For the ultimate in control, the KP 1 keypads may be used for remote power on/off and volume control, with the added capability of using an optional IR sensor for total system control.
Images & Videos
Can’t find what you’re looking for?
Chat with us
Mon - Fri - 8:00 a.m 5:00 p.m (SGT)
