AVR 4550
AVR4550 AV RECEIVER
Dokument och hämtningar
Produktspecifikationer
- Power Requirements
- AC 220 – 240V / 50Hz
- Power Consumption
- 118 W idle, 890 W max
- Continuous Average Power (FTC) per Channel (stereo mode)
- 65 Watts, 20Hz – 20kHz, @<0,07% THD, 8 ohms
- Frequency Response
- 10Hz – 150kHz (-3dB @ 1 watt)
- Signal-to-Noise Ratio
- 95dB (IHF-A)
- High Instantaneous Current Capability (HCC)
- ± 35 Amps
- Weight
- 18.1 kg
- Dimensions (H x W x D)
- 441 x 167 x 435 mm
- Signal-to-Noise Ratio
- 10Hz – 8 MHz Mono ( measured at amV RF Input Level)
- Usable Sensitivity
- FM... 1.3 µV/13.2 dBf (DIN)
- Signal-to-Noise Ratio
- FM... 70/68 dBA (DIN, 60 dBµV) (Mono/Stereo)
- Distortion (Mono/Stereo)
- FM... 0.2/0.3 % (DIN)
- Selectivity
- FM... 70 dB (± 300kHz)
- IF Rejection
- FM... 90 dB
- Usable Sensitivity
- AM... 500 µV
Looking for cutting-edge performance and attractive design? That inchs the AVR4550! Its seven-channel amplifier has all the muscle needed for the most demanding digital soundtracks. The AVR4550 turns any input source, from the latest Dolby Digital EX soundtrack to a vintage two-channel recording, into a stunning entertainment experience. All the popular surround modes are available, along with assignable rear-channel amplifiers, an RS-232 port and a standard Zone II remote for the multizone system. The EzSet remote control and comprehensive menu system make setup easy. The AVR4550. A powerful engine for exciting entertainment.
Bilder och videor
Hittade du inte det du sökte efter?
Ring oss
Ring oss på:
+46 850512632
Måndag – fredag: 09:00-17:00
Lördag – söndag: 10:00-15:00
Skicka e-post till oss
Vi är här måndag-fredag för att svara på ditt mejl så fort vi kan!
Skicka e-post till ossChatta med oss
Chatta på engelska:
Måndag – fredag: 09:00-18:00
Lördag – söndag: 10:00-16:00