AVR 445

AVR 445

Audio/Video Receiver With Dolby Digital, DTS & HDMI 1.1 Switching (80 watts x 2 | 65 watts x 7)

Såld från 2006 tills 2007

Föregående produkt: AVR 435
Efterträdande produkt: AVR 3550HD
Tillverkade i: China

Dokument och hämtningar

Produktspecifikationer

Power Requirements
AC 120V/60Hz
Power Consumption
120W Power On, idle, 1025W @ rated power output (7 channels driven)
Digital Inputs (coaxial/optical)
3/3 on Rear; 1/1 on front; 1 USB on rear
Analog Inputs
1 A/V on front panel (switchable to output)
Analog Inputs
2 audio-only
Analog Inputs
4 A/V on rear panel
Analog Inputs
6-/8-channel input
Analog Inputs
The Bridge Digital Media Player
Analog Inputs
tuner
On-Screen Display
Yes, including component video
Multizone Capability
Audio; A-BUS Ready; RS-232 serial control port; surround back channels assignable to remote zone; ZR 10 remote
Auto Setup
EzSet/EQ room equalization
Remote Control
Backlit, eight-device, programmable learning remote (2-line LCD display)
Shipping Weight (System, Accessories, Packing)
45 lb (20.4kg)
MSRP U.S.
$1299.95 each
# of Amplifier Channels
7
Stereo Mode:
Continuous Average Power (FTC) per Channel
80 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
65 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
65 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels (L & R Side, L & R Back)
65 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
17.3 inch (440mm)
Height
6.5 inch (165mm)
Depth
17.1 inch (435mm)
Weight
39 lb (17.7kg)
Dimensions:
Carton Dimensions
20.1 inch x 10 inch x 22.2 inch (510mm x 254mm x 565mm)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response:
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 60MHz (–3dB)
HDMI
Switching
Frequency Range
AM... 520 – 1720kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70dB/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.2%/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
65 x 7 @ 8 ohms, (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 40 Amps

Make the switch! With two-input HDMI; switching, XM-Ready and USB connections, and multiple digital and analog inputs (including The Bridge input), the AVR 445 is ready to handle all your sources. Digital decoding, bass management and EzSet/EQ technology transform the most complex system into an accurate, seamless sound field. A high-current amplifier and a wealth of features complete the package to switch your home theater to the inchperfect inch mode.

Hittade du inte det du sökte efter?

Ring oss

Ring oss

Ring oss på: +46 850512632

Måndag – fredag: 09:00-17:00
Lördag – söndag: 10:00-15:00

Skicka e-post till oss

Skicka e-post till oss

Vi är här måndag-fredag för att svara på ditt mejl så fort vi kan!

Skicka e-post till oss
Chatta med oss

Chatta med oss

Chatta på engelska:
Måndag – fredag: 09:00-18:00
Lördag – söndag: 10:00-16:00

message

WhatsApp oss

WhatsApp-support endast på engelska

Skicka ett meddelande till oss på engelska här 

Måndag – fredag: 09.00-18.00
Lördag – söndag: 10:00-16:00