Supportöversikt / Home Audio / Mottagare / Mottagare - surroundljud / AVR 145

AVR 145

Audio/Video Receiver With Dolby Digital & DTS (50 watts x 2 | 40 watts x 5)

Såld från 2006 tills 2007

Föregående produkt:	AVR 140
Efterträdande produkt:	AVR 147
Tillverkade i:	China

Dokument och hämtningar

Produktspecifikationer

Allmänna specifikationer

Power Requirements: AC 220 – 240V/50Hz

Power Consumption: 65W idle, 540W maximum (6 channels driven)

Digital Inputs (coaxial/optical): 2/2 on rear; 1/1 on front

Analog Inputs: 1 A/V on front panel

Analog Inputs: 2 audio-only

Analog Inputs: 3 A/V on rear panel

Analog Inputs: 6-channel input

Analog Inputs: The Bridge

Analog Inputs: tuner

On-Screen Display: Yes

Multizone Capability: No

Auto Setup: EzSet remote control

Remote Control: Eight-device, programmable remote

Shipping Weight (System, Accessories, Packing): 13.2kg

MSRP U.S.: $549.95 each

Ljudspecifikationer

# of Amplifier Channels: 5

Continuous Average Power (FTC) per Channel (stereo mode): 50 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms

Front L & R Channels: 40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Center Channel: 40 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Surround Channels: 40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 100dB (IHF-A)

Surround System Adjacent Channel Separation:

Dolby Pro Logic I and II: 40dB

Dolby Digital: 55dB

DTS: 55dB

Frequency Response: 10Hz – 130kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Unmeasurable

Slew Rate: 40V/µsec

Mått

Width: 440mm

Height: 150mm

Depth: 382mm

Weight: 9.7kg

Dimensions:

Carton Dimensions (W x H x D): 559mm x 267mm x 476mm

Videospecifikationer

Television Format: PAL, NTSC

Input Level/Impedance: 1Vp-p/75 ohms

Output Level/Impedance: 1V/75 ohms

Video Frequency Response:

Composite and S-Video: 10Hz – 8MHz (–3dB)

Component Video: 10Hz – 100MHz (–3dB)

Tuner Specifications

Frequency Range: AM... 520 – 1720kHz

Frequency Range: FM... 87.5 – 108.0MHz

Signal-to-Noise Ratio: AM... 45dB

Usable Sensitivity: FM... IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio: FM... Mono/Stereo 70/68dB

Usable Sensitivity: AM... Loop 500µV

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion: FM... Mono/Stereo 0.2/0.3%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 70dB

Image Rejection: FM... 80dB

IF Rejection: FM... 90dB

Amplifier Specifications

Amplifier Power (RMS): 40 x 5 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)

High Instantaneous Current Capability (HCC): ± 25 Amps

Affordably priced, but full-featured. The AVR 145's sonic quality and sophisticated features make it an exceptional value. From RS-232 software upgradeability to the latest Cirrus Logic 49500 series DSP, Logic 7 processing, A/V Sync Delay and 100MHz component video switching, the AVR 145 is modest in price, but high in performance.