AVR 100

Power Requirements

120V AC/60Hz

Power Consumption

72W idle, 290W maximum (2 channels driven)

Surround System Adjacent Channel Separation

Pro Logic Decoding... 40dB

Surround System Adjacent Channel Separation

Dolby Digital... 55dB

Frequency Response

10Hz – 100kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM)

0.08%

Rise Time

16µsec

Slew Rate

40V/µsec

MSRP U.S.

$499.95 each

Television Format

NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1V/75 ohms

Video Frequency Response

10Hz – 8MHz (-3dB)

Frequency Range

AM... 520 – 1710kHz

Frequency Range

FM... 87.5 – 108MHz

Signal-to-Noise Ratio

AM... 35dB

Usable Sensitivity

FM... IHF 1.5µV/14.8dB

Signal-to-Noise Ratio

FM... 73dB Mono ( measured at amV RF Input Level)

Usable Sensitivity

AM... Loop 800µV

Distortion

AM... 1kHz, 50% Mod 1.5%

Signal-to-Noise Ratio

FM... 70dB Stereo ( measured at amV RF Input Level)

Distortion (Mono/Stereo)

FM... 0.3%/0.5%

Selectivity

AM... ± 10kHz, 30dB

Stereo Separation

FM... 40dB @1kHz

Selectivity

FM... ± 400kHz, 60dB

Image Rejection

FM... 40dB

IF Rejection

FM... 100dB

Tuner Output Level

FM... 1kHz, ±75kHz Dev 500mV

Continuous Average Power (FTC) per Channel (stereo mode)

50 watts per channel @ <0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms

Continuous Average Power (FTC) per Channel (surround modes)

40 watts per channel @ <0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms

High Instantaneous Current Capability (HCC)

± 25 Amps

Input Level/Impedance

250mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio

90dB