Support Overview / Home Audio / Receivers / Receivers - Surround Sound / AVR 2700
AVR 2700

AVR 2700

7.1-channel, network-connected audio/video receiver with AirPlay

Sold from 2013 until now

Predecessor Product: AVR 2650
Successor Product: AVR 1610
Made in: China

Documents & Downloads

Product Specifications

Power Consumption (full power/idle)
120W idle; 1405W maximum
Multichannel Power (all channels driven)
100 watts/ch, 20Hz – 20kHz, less than 0.07% THD,two channels driven @ 8 ohms, 6-ohm certified
Transient intermodulation distortion (TIM):
Unmeasurable
Input Sensitivity/Impedence
200mV/47k ohms
Input Level/Impedence (ohm)
1Vp-p/75 ohms
Frequency Range (MHz)
87.5MHz–108.0MHz
Selectivity (±10kHz):
30dB
Frequency Range (kHz)
520kHz – 1720kHz
Stereo Separation @ 1kHz (dB)
40dB @ 1kHz
Output Level/Impedence (ohm)
1Vp-p/75 ohms
Surround system adjacent-channel separation:
Dolby Pro Logic® I/II: 40dBDolby Digital: 55dBDTS: 55dB
Distortion (1kHz, 50% mod):
0.2%/0.3%
High Instantaneous Current Capability
±39 amps
Usable Sensitivity (Loop)
500?V
Signal-to-Noise Ratio (dB)
45dB
Stereo Power
100 watts/ch, 20Hz – 20kHz,less than 0.07% THD, both channels driven @ 8 ohms, 6-ohm certified
Signal-to-Noise Ratio (Mono/Stereo dB)
70dB/68dB
Bandwidth @ 1W (+0dB/–3dB)
10Hz – 130kHz
Distortion (Mono/Stereo)
0.80%
Signal-to-noise Ratio (IHF-A) (dB)
100dB
Usable Sensitivity (IHF)
1.3?V/13.2dBf
Selectivity (±400kHz):
70dB
Weight (lb)
16.9 lb
Width (in)
17-5/16" inches
Width (mm)
440 mm
Weight(kg)
7.7kg
Height (mm)
165mm
Height (in)
6-1/2" inches
Depth (in)
15" inches
Depth (mm)
382mm
Weight
16.9 lb (7.7 kg)
Television Format
NTSC
Video Frequency Response (Component Video)
10Hz – 8MHz (–3dB)
IF Rejection (dB)
90dB
Image Rejection (dB)
80dB
Frequency Range
FM... 87.5 – 108.0MHz
Usable Sensitivity
FM... 1.3V/13.2dBf
Signal-to-Noise Ratio
FM... 70/68 dBA (Mono/Stereo)
Distortion (Mono/Stereo)
FM... 0.2%/0.3%
Stereo Separation
FM... 40dB @1kHz
Selectivity
FM... 70dB @ 400kHz
Image Rejection
FM... 80dB
IF Rejection
FM... 80dB
Frequency Range
AM... 520kHz – 1710kHz
Signal-to-Noise Ratio
AM... 38dB
Usable Sensitivity
AM... 500 V in loop
Distortion
AM... 50% @ 1kHz, 0.8% mod
Selectivity
AM... 30dB @(10kHz)
Power Requirement
AC 120V/60Hz

Great entertainment deserves a great presentation.

The Harman Kardon® AVR 2700 audio/video receiver has the immense connectivity and astonishing sound output to turn your living room into the kind of home entertainment center once reserved for movie moguls and dotcom billionaires. Its eight HDMI® inputs, including one input on the front panel and 4K compatibility, ensure connectivity to all of your Blu-ray™ disc, HDTV and video-game sources, while its analog and digital audio input jacks keep you connected to all your legacy components. Built-in AirPlay and DLNA® 1.5 certified connectivity empower you to play almost every song on your computer, tablet and mobile devices and do it in surround sound regardless of the number of channels in the original recording, thanks to our exclusive Logic 7 processing. To top it all off, an intuitive, high-definition menu system, remote control, available mobile app and EzSet/EQ™ calibration make operation and setup seem too easy for a device this advanced. Powered by an eco-friendly, digital power supply that delivers superior performance and 100 watts per channel without the weight of conventional designs, this receiver will not only fill your room with crisp, clear Harman Kardon sound but also make you feel as though you are with the musicians or filmmakers who are creating it. Just think of the AVR 2700 as your personal concierge, eager to help you enjoy virtually any entertainment you like.

Harman Kardon engineers have built the AVR 2700 audio/video receiver for a premium home theater experience. No room is too big for the receiver’s high-current, 100-watt-per-channel amplifier. And speaking of the channels: With 7.1 of them, the AVR 2700 empowers you to add an extra dimension to the traditional five-channel surround-sound setup, or go with 5.1 channels in a main viewing room and use the extra two channels to power the sound in another room.
The AVR 2700 receiver can simultaneously play two different sound sources in two different zones. When you choose to connect your main system to 5.1 channels, you can use its other two sound channels as an independent system in a second room.
Hear your networked media sources as never before in pitch-perfect surround sound. DLNA 1.5 enables the AVR 2700 to stream audio from compatible devices on your home network, allowing you to enjoy them with a level of quality that you would not have thought possible.
This free, downloadable software enables your AVR 2700 to enjoy DLNA compatibility with your Mac OS devices or Windows® operating system. And it even helps organize and clean up the cover art on your music files.
Hear how truly amazing your streaming music can sound. AirPlay allows you to stream audio content from your iOS® devices and from iTunes through your AVR 2700 for superb audio.
Lighter. Greener. Louder. The AVR 2700 uses a custom designed digital power supply that delivers the amplifier power and superior sound you expect from Harman Kardon without the need for hefty transformers. The result is the same power as conventional designs with a lower overall carbon footprint impact.
The Harman Kardon EzSet/EQ system automatically sets key system parameters and fine-tunes the AVR 2700’s sound to your specific listening room with the press of a few buttons.
Your AVR 2700 doesn’t need a docking station. Instead, its front-panel USB port allows an easy-access connection point for virtual any iOS device. It even lets you access music stored on a flash drive. Furthermore, the included AVR remote gives you a convenient way to control most connected devices.
Enjoy many of your favorite radio stations, podcasts and Internet-only programming from around the globe in outstanding surround sound on your AVR 2700. vTuner® Internet radio gives you quick, easy access to a vast selection of radio stations, podcasts and internet-exclusive content from around the world.
Downloadable from the iTunes store or Google Play Market, the free HK Remote Control App allows you to transform your smartphone or tablet into an easy-to-use remote control. Compatible with most iOS and Android™ devices, its high-definition graphical user interface gives you full control of your AVR 2700 through the convenience of your favorite portable device.
3D content plays as vividly and realistically in your home as it would in a movie theater, thanks to the AVR 2700’s advanced HDMI connectivity. Experience everything from a 3D TV to a 3D Blu-ray Disc™ recording with astonishing realism. CEC further simplifies the control of compatible HDMI-connected products from the AVR’s remote control.
Hear films on your AVR 2700 the way the filmmakers intended them you to hear them – no matter which spot you get on the couch. Dolby® TrueHD and DTS-HD Master Audio™ decoding create an immersive, high-resolution sound environment that matches the high-resolution HDMI video from HD sources such as Blu-ray Disc recordings.
Prepare for the future with the ability to pass through ultra high-resolution 4K video or upscale any incoming video to 4K.

FAQs & How-Tos

1 results
  • What HDCP version is featured in the AVR and BDS models?
    All AVR models up to and including 151S, 161S and 171S feature HDCP version 1.4. (High-bandwidth Digital Content Protection). This is also true for BDS 280, 580, 280S and 580S. It is not possible to update to version 2.2 with any software/firmware update, as this requires a hardware change. Future models may feature version 2.2, made for UHD/4k content.

Images & Videos

  • AVR 2700 - Black - Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.4 (100 watts x 7) 7.1 - Hero
  • AVR 2700 - Black - Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.4 (100 watts x 7) 7.1 - Hero
  • AVR 2700 - Black - Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.4 (100 watts x 7) 7.1 - Front
  • AVR 2700 - Black - Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.4 (100 watts x 7) 7.1 - Back
  • AVR 2700 - Black - Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.4 (100 watts x 7) 7.1 - Back
  • AVR 2700 - Black - Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.4 (100 watts x 7) 7.1 - Detailshot 1

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: Please see below

Globe: +63 917 849 7697
Smart: +63 998 542 0234

Mon - Fri - 8:00 a.m 5:00 p.m (PHT)

E-mail us

E-mail us

365 days a year

We will respond within one business day.

Email us
Chat with us

Chat with us

Mon - Fri - 8:00 a.m 5:00 p.m (PHT)