AVAP 5G

Power Requirements

120V AC/60Hz

Power Consumption

Receiver… 72W idle, 332W maximum (2 channels driven)

MSRP U.S.

$699.95 per system

Dimensions

Receiver… Width 17-2/5 inch (442mm)

Dimensions

Receiver… Height 6-1/8 inch (156mm)Height measurement includes feet and chassis.

Dimensions

Receiver… Depth 16-5/16 inch (415mm) Depth measurement includes knobs, buttons and terminal connections.

Dimensions (H x W x D)

SATELLITES… 7 x x 4 3/4 x 3 3/4

Dimensions (H x W x D)

CENTER… 4 3/4 x 10 1/2 x 3 3/4

Dimensions (H x W x D)

SUB… 11 1/2 x 11 1/2 x 11 1/2

Weight

Receiver… 24.6lbs (11.2kg)

Television Format

NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1V/75 ohms

Video Frequency Response

10Hz to 8MHz (-3dB)

Frequency Range

AM... 520 – 1710kHz

Frequency Range

FM... 87.5 – 108MHz

Signal-to-Noise Ratio

AM... 43dB

Usable Sensitivity

FM... IHF 1.3?V/13.2dBf

Signal-to-Noise Ratio

FM... 70dB Mono ( measured at amV RF Input Level)

Usable Sensitivity

AM... Loop 500µV/M

Distortion

AM... 1kHz, 50% Mod. 0.8%

Signal-to-Noise Ratio

FM... 68dB Stereo ( measured at amV RF Input Level)

Distortion (Mono/Stereo)

FM... 0.3%/0.5%

Selectivity

AM... ± 10kHz, 30dB

Stereo Separation

FM... 40dB @1kHz

Selectivity

FM... ± 400kHz, 65dB

Image Rejection

FM... 40dB

IF Rejection

FM... 110dB

Tuner Output Level

FM... 1kHz, ±75kHz Dev 500mV

Frequency Response

45Hz – 150kHz

Crossover Frequency(ies)

continuously variable 50Hz – 150Hz

Input Impedance

200k ohms (high level)

Input Impedance

10 ohms (low level)

Recommended Amplifier Power (RMS)

50 Watts

Subwoofer Transducer

specially designed 8 inch polycone

Frequency Response

200Hz – 20kHz

Crossover Frequency(ies)

5kHz

Nominal Impedance

compatible with 8 ohms

Low-Frequency Transducer (Woofer)

3-1/2 inch shielded

High-Frequency Transducer (Tweeter)

.5 inch (13mm) polycarbonate tweeter with acoustic lens

Frequency Response

150Hz – 20kHz

Crossover Frequency(ies)

5kHz

Nominal Impedance

compatible with 8 ohms

Low-Frequency Transducer (Woofer)

3-1/2 inch shielded

Continuous Average Power (FTC) per Channel (stereo mode)

45 Watts per channel, 20Hz – 20kHz @ <0.08% THD, both channels driven into 8 ohms

Amplifier Power (RMS)

SURROUND MODES... Front L&R channels... 35 Watts per channel, 20Hz – 20kHz @ <0.08% THD into 8 ohms

Amplifier Power (RMS)

SURROUND MODES... Surround channels... 35 Watts per channel, 20Hz – 20kHz @ <0.08% THD into 8 ohms

Amplifier Power (RMS)

SURROUND MODES… Center channel... 35 Watts @ <0.08% THD, 20Hz – 20kHz into 8 ohms

High Instantaneous Current Capability (HCC)

± 35 Amps

Input Level/Impedance

200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio

92dB (IHF-A)

Pro Logic Decoding

40dB

Frequency Response

8Hz – 120kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM)

Not Measurable

Rise Time

16µsec

Slew Rate

40V/µsec