How To

How To

140 results
  • TV Connection HDMI (ARC)

      Back
    TV
    1. Connect your HDMI cable (included in the box) to your TV.
    2. Locate your TVs HDMI ARC (Audio Return Channel) port.
    3. Find the HDMI OUT on the back of your Enchant 800 or 1300 Soundbar.
    4. Now enjoy watching TV and listen to great audio through your Enchant soundbar.

    Optical connection
    optical con

    1. Connect your Optical cable (included in the box) to your TV.
    2. Find the Optical OUT connection on your TV.
    3. Locate the Optical IN on the back of your Enchant soundbar.
    4. Enjoy sound through the optical connection.

    Using the HDMI Inputs

    Other devices
    1. Find an HDMI Cable for your other devices.
    2. Use the HDMI inputs on the Enchant Soundbar.
      1. NOTE: Enchant 800 only have one HDMI input port and Enchant 1300 has three HDMI input ports.
    3. Switch source using your Remote control or pressing the source selector buttonspruce.
    4. The display on your Enchant device will show which HDMI input you are on.
    5. Enjoy watching or playing through your Enchant Soundbar.

     
  • Citation One and Citation 100

    1. Press the Bluetooth BT Cwe icon. Located on the top panel. On top panel BT
    2. Go to Settings icon-menuNEXTMake sure Bluetooth is  ON BT
    3. Find your Citation speaker and connect.
              Connect
    1. You are now connected and ready to play music over Bluetooth, Enjoy!

    Citation 300, 500, Bar and Towers

    1. Swipe upFINGER on the display to find Bluetooth icon.
    2. Tap Citation OFFNEXTIcon will light up BT screen panelNEXTGo to Settings icon-menu NEXTMake sure Bluetooth is ON BT
    3. Find your Citation speaker.
             BT ON CONTING
    1. You are now connected and ready to play music over Bluetooth, Enjoy!
  • If you have two of the same model Google Assistant speakers, you can create a stereo speaker system.

    How to create a stereo pair...

    1. Open the Google Home appUser-added image
    2. Find the speaker you want to setup in stereo pair
    3. Find the speaker/room User-added image
    4. Tap on Settings User-added image
    5. Go to Sound Settings
    6. Find the Speaker pair
    7. You are now entering the setup page pair Tap User-added image
    8. Find your speaker under the Pair with list and tap.
    9. Move the speaker to be Left or Right side and press User-added image
      1. You can tap on Play sound to identify which speaker it is.
    10. Find a name for your Stereo pair User-added image
    11. It takes a minute to complete the setup.
    12. When the configuration is done it will say Ready READY
    13. Press Done
    You have now completed the setup and created a Stereo pair sound experience.

    NOTE 1:  This is only possible with two of the same speakers.  If they are not identical (Example: Citation 100 & Citation One), setting up a stereo pair will not be an option.

    NOTE 2:  It is possible to make a stereo pair of a Mk1 with a Mk2. Setup as normal.
    Airplay from the Mk2 will not be available.

    NOTE 3: It is only possible to use Chromecast and Bluetooth in stereo, Airplay will be mono (and should be grouped in iOS Airplay menu.


     
    1. Mute

      1. Touch the microphone icon on the screen to mute the Google Voice assistant microphone.
        1. NOTE: Google Assistant will not work when the microphone is muted.
      2. Touch and press it again to unmute the microphone.
      3. You can now give it any voice commands that you would like.
    2. How to pair an Enchant Subwoofer with your Enchant bar

      1. Go to the back of your Enchant soundbar (800 or 1300)
      2. Press the "Subwoofer pairing" button for 2 seconds.
      Subwoofer bar
      1. In front of your Enchant display, it will say "Subwoofer pairing"
      2. Go to the back of your Enchant subwoofer.
      3. Press the "Subwoofer pairing" button.
      SUB - pair
      1. The small LED indicator will start to flash rapidly and when the connection is successful, it will be a steady light.

      You now have more bass performance and can enjoy deeper richer sound!
    3. 1. Power on your Enchant 800 or Enchant 1300 Soundbar. 2. There are two ways to enter Bluetooth pairing mode on your Enchant soundbar. 2.1. Press the dedicated source button on top of your Enchant soundbar source 2.2. Press the source button until you see "Bluetooth" in the front of the Enchant display. 3. The second option is to use the Remote control included with your Enchant soundbar. 4. Press the "BT" button on your Remote control. 5. The display will show "Bluetooth pairing". 6. Go to your Bluetooth settings menu on your mobile device. 7. Enable Bluetooth and connect to your Enchant 800 or Enchant 1300 Soundbar.
    4. This video shows how to play music and much more with your Google Assistant. You can practice all of your voice commands on your Harman/Kardon Citation or JBL LINK products.


    5. Daily Care instructions for Citation speakers fabric (wool) Daily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years. Never use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself! Many types of stain can be removed using warm water with a microfiber cloth (not too wet). Stain removal guide If you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains. Here is how to do it. First, soak up the liquid with an absorbent napkin or Microfiber cloth. For dried stains use a spoon to roughen the surface. To avoid the stain spreading further start from the edge of the stain working towards the middle. WARNING! Be careful when using solvents, because these could dissolve the upholstery material beneath. Regular and normal cleaning Vacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth. When using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric). General information These tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device. In all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker. HARMAN do not have any recommended companies or partners to redirect any customers too. For furter information we advise visiting the fabric company called KVADRAT by clicking on these links below: https://kvadrat.dk/care-and-maintenance/upholsteries https://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf There are a lot of information about the fabric we are using and you can contact them for further information.
    6. Daily Care instructions for Citation speakers fabric (wool)

      Daily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.
      Never use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!

      Many types of stain can be removed using warm water with a microfiber cloth (not too wet).

      Stain removal guide

      If you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.
      Here is how to do it.

      1. First, soak up the liquid with an absorbent napkin or Microfiber cloth.
      2. For dried stains use a spoon to roughen the surface.
        1. To avoid the stain spreading further start from the edge of the stain working towards the middle.
      3. WARNING!
        1. Be careful when using solvents, because these could dissolve the upholstery material beneath.

      Regular and normal cleaning

      Vacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.
      When using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).
       


      General information

      These tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.
      In all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.
      HARMAN do not have any recommended companies or partners to redirect any customers too.

      For furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:

      https://kvadrat.dk/care-and-maintenance/upholsteries
      https://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf

      There are a lot of information about the fabric we are using and you can contact them for further information.

    7. Press and hold the Phone and VOL + button simultaneously.
      After 5 seconds, the unit powers Off, and is now reset.
    8. Press and hold the 'Volume +' and 'Bluetooth' buttons simultaneously for > 2 seconds (> 5 seconds for the Onyx Studio 8), until the speaker powers off.
      The Onyx Studio is now reset to factory settings.
    9. Resetting the SOUNDSTICKS 4 to Factory Settings

      1. The unit must be on
      2. Press and hold Power and Bluetooth buttons for > 10 seconds
      3. The unit is reset
    10. On the bottom of your ADAPT+ there is a reset button. Hold it down for 5 seconds, until the round button LED lights up in white. The product is now reset and ready to be set up again.
    11. Resetting the device

      top panel
      1. In any source mode, press and hold the power button power and Source button source for 5 seconds.
      2. When the factory settings restore is complete, the soundbar automatically turns off and restarts.
      3. You can now set it up via Google Home app Google Home app again or connect any new Bluetooth devices.
    12. 1. Power on the Enchant 800 or Enchant 1300 Soundbar. 2. In any source mode, press the power and source button for 5 seconds. 3. The Enchant 800 or Enchant 1300 will power off automatically and turn on again. 4. Your device is now reset back to default Factory settings. 5. You can now redo the setup through the Google Home app or pair with a new smartphone or tablet.
    13. What you need first

      • A Harman/Kardon Enchant Soundbar (1300 or 800 model).
      enchant
      • Latest version of the Google Home appGoogle Home app
      • A mobile device or tablet with Android or iOS system.
      • An internet connection.
      • Dual-band router with 2.4GHz and 5GHz connection

      Adding your Enchant soundbar to your Wi-Fi

      1. Open the Google Home appGoogle Home app
             Google home
      1. Click on "ADD" to connect your Enchant 800 or Enchant 1300 Soundbar to your Wi-Fi network.
      2. Follow the instructions on screen and enjoy beautiful sound using Chromecast technology.


      Setup your enchant
    14. Download the Google Home app, available for iOS and Android versions. 1. Open the Google Home app. 2. Plug in power for your Enchant 800 or Enchant 1300 Soundbar. 3. Enable Bluetooth. 3.1. Enable Location service on your phone and permit Google Home app to view your location (Android only). 4. Click setup device in your Google Home app. 5. Follow the instructions provided in the app, and enjoy Chromecast streaming for your Enchant soundbar!
    15. This video shows how to use a smart speaker that has Google Assistant built-in.
      Our LINK series have Google Assistant built-in therefore you can practice your voice commands together with Harman/Kardon Citation or JBL LINK products

    16. Before you start

      • Remove any interference that might be blocking the Soundbar side-firing speakers.
      • Any ambient noise or sounds that could disrupt the calibration needs to be out of the room.
      • In case you are moving the Enchant Soundbar you will need to calibrate the sound again.
      • If something went wrong, you can always delete the calibration settings by resetting the system.
        • Press and hold Power - button and  Soruce button down for 5 seconds.
        • This will delete all settings, including the Wi-Fi connection.


      How to use the MultiBeam feature

      1. Press and hold the CALIBRATION iconbutton for 3 seconds.
        1. On the Enchant display a timer will start counting down from 3 to 0 (Once hitting 0 the Calibration will begin).
      Remote icon
      1. The calibration takes around 60 seconds before it is complete. While calibrating you will hear some noises coming from the speaker.
      2. When finished the display on the Enchant Soundbar will say "DONE"

       
    17. The power on/off symbol/button will flash white consistently. The LED switches to OFF when charging is complete.
    18. Make sure you disable AP/Client isolation on your Access Point / Extender and that Multicast forwarding is not disabled between the W-Fi networks. However, we cannot guarantee than streaming will work flawless as Extender networks are tricky and can cause many issues. Always use a 5GHz Wi-Fi network extender for best results.
    19. 1. Disconnect/unplug the product from the network cable. If dealing with a smartphone, forget the wi-fi on the phone. 2. Shut the router completely OFF. (do not reboot, you must turn it completely off) 3. Boot the router up and let it complete it's connection with everything, usually a few minutes. 4. Shut the router completely OFF, again. This is REALLY important. Before turning it off a second time, the router still has the product in it and is looking to connect to it. Shutting it off a second time allows the router to go through a complete power cycle without ever seeing the product, so it will remove it from its system. 5. Boot the router up, again, and let it complete it's connection with everything. 6. Now plug-in/turn on the product. The router should find the product and all should work. 7. If dealing with a smartphone, search for the wi-fi and reconnect to it. All should work after this.
    20. If you are having problems playing music after setting up a new speaker (no matter what connection is used, Ethernet, Wi-Fi), please restart the Harman Kardon Controller app after the speaker setup is complete.
    21. Some third-party apps do not support volume changing when your smart device is in lock screen mode.
    22. If you are experience this message, please power cycle the Wi-Fi router and speaker(s). Disconnect the devices' power cable for 10 seconds and then reconnect them. Once the router and speaker(s) completely boots up, please try to setup again.
    23. This feature is not yet implemented in our Harman Kardon Allure or Allure portable speaker. Future updates might include this option, so we advise keeping an eye on the release notes in the HK Alexa Setup app about possible future firmware updates.
    24. The Harman Kardon Aura Studio 2 only supports Bluetooth. The HK Controller app only works with Harman Kardon products that have WiFi connectivity.
    25. Unfortunately, some Huawei phones are not able to stream music from the HK Controller app to 1st generation Omni speakers. However, the new Omni 10+, 20+, and 50+ have fixed this issue, and you will be able to stream music to them using your Huawei phone.
    26. It is not possible to use the speaker while installing it to your WiFi network. Once you have successfully connected to the WiFi network, you can use Bluetooth and AUX again.
    27. Make sure that both speakers are using the same network technology, either Ethernet or WiFi. Mixing them will increase music loading time.
    < 1 2 3 4 5 >

    Can’t find what you’re looking for?

    Call us

    Call us

    Talk to a product expert
    Call us now at: +6499130453

    Mon - Fri - 9:00 a.m 6:00 p.m (NZST)

    E-mail us

    E-mail us

    365 days a year

    We will respond within one business day.

    Email us
    Chat with us

    Chat with us

    Mon - Fri - 9:00 a.m 6:00 p.m (NZST)