AVR 635

AVR 635

Audio/Video Receiver With Dolby Digital & DTS (90 watts x 2 | 75 watts x 7)

Sold from 2004 until 2006

Made in: China

Documents & Downloads

Product Specifications

Power Requirements
AC 120V/60Hz
Power Consumption
59W @ Power On, idle; 1000W @ rated power output (7 channels driven)
Digital Inputs (coaxial/optical)
3/3 on Rear; 1 (switchable to output)/1 on front
Analog Inputs
1 A/V on front panel (switchable to output)
Analog Inputs
2 audio- only
Analog Inputs
4 A/V on rear panel
Analog Inputs
6-/8-channel input
Analog Inputs
tuner
On-Screen Display
Yes
Multizone Capability
Audio; A-BUS Ready; RS-232 serial control port; surround back channels assignable to remote zone; Zone II remote
Auto Setup
EzSet/EQ room equalization
Remote Control
Backlit, eight-device, programmable learning remote (2-line LCD display)
Shipping Weight (System, Accessories, Packing)
47 lb (21.4kg)
MSRP U.S.
$1299.95 each
# of Amplifier Channels
7
Continuous Average Power (FTC) per Channel (stereo mode)
90 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
75 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
75 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels (L & R Side, L & R Back)
75 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
17.3 inches (440mm)
Height
6.5 inches (165mm)
Depth
17.1 inches (435mm)
Weight
41 lb (18.6kg)
Dimensions:
Carton Dimensions
20.1 inches x 10 inches x 22.2 inches (510mm x 254mm x 565mm)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response:
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 50MHz (–3dB)
Frequency Range
AM... 520–1720kHz
Frequency Range
FM... 87.5–108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.2/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
75 x 7 @ 8 ohms, (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 50 Amps

Power meets power. The AVR 635 combines the sonic power of a high-current, ultrawide-bandwidth amplifier with the computing power of Texas Instruments' most advanced audio DSP to deliver unparalleled performance. Thanks to Harman Kardon's advanced EzSet/EQ functionality, the AVR 635 not only automates speaker, output and delay settings; it corrects for room acoustics with a parametric equalizer. Add video conversion circuits that output all video sources via component connections with on-screen graphics, and you have the power to tame any system and deliver powerful performance.

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: +6499130453

Mon - Fri - 9:00 a.m 6:00 p.m (NZST)

E-mail us

E-mail us

365 days a year

We will respond within one business day.

Email us
Chat with us

Chat with us

Mon - Fri - 9:00 a.m 6:00 p.m (NZST)