AVAP 1G
AVR10 Receiver & AVS10 Speaker System - 6PC
Sold from 1997 until 1995
Documents & Downloads
Product Specifications
- MSRP U.S.
- $999.95 per system
- Usable Sensitivity
- FM... MONO – 11.2
- Quieting Sensitivity
- FM... STEREO – 40.3
- Signal-to-Noise Ratio
- FM... MONO – 70dB
- Signal-to-Noise Ratio
- FM... STEREO – 65dB
- Capture Ratio
- FM... 2dB
- Selectivity
- FM... ADJACENT CHANNEL – 5dB
- Alternate Channel Selectivity
- FM... 65dB
- IF Rejection
- FM... 90dB
- AM Rejection
- FM... 55dB
- Stereo Separation
- FM... 45dB
- Total Harmonic Distortion
- FM... MONO – 0.3%
- Total Harmonic Distortion
- FM... STEREO – 0.5%
- Selectivity
- AM... EXTERNAL ANTENNA – 25 microvolts
- Alternate Channel Selectivity
- AM... 38dB
- Image Rejection
- AM... 35dB
- IF Rejection
- AM... 50dB
- Frequency Response
- 200Hz – 20kHz
- Crossover Frequency(ies)
- Continuously variable 50Hz – 150Hz
- Input Impedance
- HIGH LEVEL – 200k ohms
- Input Impedance
- LOW LEVEL – 10k ohms
- Amplifier Power (RMS)
- 50 watts
- Subwoofer Transducer
- Specially designed 8 inch polycone
- Frequency Response
- 200Hz – 20kHz
- Crossover Frequency(ies)
- 5kHz
- Nominal Impedance
- compatible with 8 ohms
- Low-Frequency Transducer (Woofer)
- 3.5 inch shielded
- High-Frequency Transducer (Tweeter)
- Two .5 inch polycarbonate with acoustic lens
- Frequency Response
- 150Hz – 20kHz
- Crossover Frequency(ies)
- 5kHz
- Nominal Impedance
- compatible with 8 ohms
- Low-Frequency Transducer (Woofer)
- 3.5 inch shielded
- High-Frequency Transducer (Tweeter)
- Two .5 inch polycarbonate with acoustic lens
- Audio Inputs
- 2
- Audio Loops
- 1
- Audio/Video Inputs
- 1
- Audio/Video Loops
- 1
- Preamp Outputs
- Main, Sub
- Power Amp Inputs
- Main
- Video Outputs
- 1
- Amplifier Power (RMS)
- FRONT L & R, CENTER – 30 watts per channel @ 8 ohms
- Amplifier Power (RMS)
- STEREO – 35 watts per channel @ 8 ohms
- Total Harmonic Distortion
- STEREO 0.09%
- Total Harmonic Distortion
- FRONT L & R, CENTER – 8 ohms 0.3%
- Total Harmonic Distortion
- REAR – 1% (8 ohms)
- Output 4 Ohms
- REAR -20 watts per channel
- High Instantaneous Current Capability (HCC)
- ± 20 Amps
- Negative Feedback
- 20dB
- Frequency Response
- 0.5Hz – 100kHz
- Rise Time
- 1.8 microseconds
- Transient Intermodulation Distortion (TIM)
- Unmeasurable
- Signal-to-Noise Ratio
- CD – 92dB VIDEO – 83dB
- Input Level/Impedance
- CD, VIDEO, TAPE – 150 mv/22k ohms
- Tone Controls
- BASS – ± 10dB @ 50Hz
- Tone Controls
- TREBLE – ±10dB @ 10kHz
Images & Videos
Can’t find what you’re looking for?
Chat with us
Mon - Fri - 9:00 a.m 6:00 p.m (NZST)