How To
How To
441 results
-
This is caused by the volume synchronizaton system in the iPad. When you switch off the iPad with click sounds activated, it sends the click sound to the Go+Play, also ordering the Go+Play to increase volume to maximum. The hiss is a result of the Go+Play Wireless being at full volume. As soon as you re-start your music playing from the iPad, volume is back to normal music use. If you do not switch the iPad on again, the Go+Play goes into standby after a few minutes, and the hiss disappears. You can prevent this problem by de-activating the click/alarm sounds on the iPad.Was this helpful? Thank you for your feedback!
-
Yes, after half an hour of inactivity, and provided Bluetooth pairing has been interrupted, Aura goes into full Standby. Now the wi-fi control light will no longer blink.Was this helpful? Thank you for your feedback!
-
This is not an error. The App links to the Harman Kardon website when the "?" Button is tapped. User can then search the Quick Start Guide or Owner's Manual on the website.Was this helpful? Thank you for your feedback!
-
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback! -
The source device may need to be in Standby, not just stopped, for the Soundbar to go into Standby mode using the optical or coaxial inputs.Was this helpful? Thank you for your feedback!
-
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback! -
You can manually type in the network name (SSID) and password to connect if the network does not appear.
Was this helpful? Thank you for your feedback! -
There are threaded inserts for mounting screws in the bottom of the Omni 10+ and Omni 20+. Mounting accessories are not available via Harman Kardon. For Omni 10+ there are two mounting screw holes which are 3mm in diameter and 67mm apart. For Omni 20+ there are two mounting screw holes which are 3mm in diameter and 110,5mm apart.Was this helpful? Thank you for your feedback!
-
In Amazon's app called Alexa. There you can set, change and login with your favorite supported music service. They offer Amazon Music, Spotify, Pandora and much more. Go to settings in the Alexa app, select "Music & Media.Was this helpful? Thank you for your feedback!
-
The soundbar support SBC codec.Was this helpful? Thank you for your feedback!
-
The Harman Kardon Aura Studio 2 features: Bluetooth v.4.1 A2DP v.1.3 AVRCP v.1.5Was this helpful? Thank you for your feedback!
-
For OMNI BAR+, three sources are available: HDMI (not applicable for ADAPT+), Optical or AUX input. For Adapt+ two sources are available: Optical in/outputs and Analog in/outputs. If you select "Watching movies and TV shows" in the HK controller app for either one of them, you will have a very little delay and good lip sync with the TV for video applications. However, you will not be able to rebroadcast the TV signal to other OMNI+ speakers when selecting this mode. If you select "Listening to music", you will be able to rebroadcast TV signal to other OMNI+ speakers in your house, however, you will have lip sync delay with video material. Select that specific mode if you use HDMI (not applicable for ADAPT+), Optical or AUX for music only. Using Chromecast, Spotify Connect or Bluetooth is not part of these modes. When using one of these streaming methods, you are able to rebroadcast any music source.Was this helpful? Thank you for your feedback!
-
Model HTFS 2 is used for the satellite speakers in these two BDS systems. There is no floor stand for the center speaker in the 635 system.Was this helpful? Thank you for your feedback!
-
The BDS system supports a variety of audio and video formats. Listing all disc, surround and codec formats is beyond the scope of an FAQ. Please donwload the Owner's Manual from the harman.com website for a full list.Was this helpful? Thank you for your feedback!
-
NOTES
- Only file names that contain numbers or English characters can be displayed, otherwise “UNKNOWN” will be displayed.
- “UNSUPPORTED” is displayed when the file format is not supported.
- Do not extract the USB device while in operation.
- For a large capacity USB, it may take longer than a few minutes to be searched. USB with more than 2000 files cannot be supported.
- Devices which require additional program installation connected to a computer are not supported.
- The USB port of the soundbar cannot be connected to a computer and it cannot be used as a storage device.
- The exFAT and NTFS file system is not supported. FAT16/FAT32 systems are available.
- Depending on some devices, it may not be available to recognize the followings on the soundbar: External HDD; Card readers; Locked devices; Hard type USB devices; USB hub; Using USB extension cable; iPhone/iPod/iPad; Android device.
Was this helpful? Thank you for your feedback! -
Harman Kardon speakers that have the Wireless Dual Sound feature (stated on package) are compatible with the Go + Play Mini.Was this helpful? Thank you for your feedback!
-
HTFS 3 will match these speakers sets: HKTS 20, HKTS 30, HKTS 60, HKTS 65 and HKTS 200. HTFS 2 will match these speakers sets: HKTS 9, HKTS 16 and HKS 4 satellite speakers.Was this helpful? Thank you for your feedback!
-
BDS 280S and 580S support 802.11b, g and n. (2.4GHz ISM Band, Europe 13 Channels).Was this helpful? Thank you for your feedback!
-
To ensure the best sound experience, the battery performance of the Onyx Studio 9 is adjusted under the following conditions:
1. The speaker is in battery mode and the battery level is below 30%.
2. The music volume is at or above 50%.
To charge your device, try plugging in the AC cable or lowering the music volume.
Was this helpful? Thank you for your feedback! -
An unstable internet or connectivity might cause software updates to fail during the Stereo Boost Pairing mode.
Press and hold the "Bluetooth" button to quit the Stereo Boost Pairing mode, and update the speaker independently.
Was this helpful? Thank you for your feedback! -
The remote is only capable of operating one device at a time (unless you have programmed advanced functions such as Volume, Channel or Transport control Punch-Through). When you press the Source Selector to operate your other product, such as the DVD player, the remote cannot control any other product, including the AVR, until you press the AVR Button again. To avoid your problem in the future, always press the AVR Button or appropriate Source Selector before you enter any command.Was this helpful? Thank you for your feedback!
-
This is by design to achieve maximum battery play time. To get Maximum loudness connect the unit to AC power during usage.
Was this helpful? Thank you for your feedback! -
You need to charge your Onyx Studio 9 using the power cord included in the package. It takes about 4 hours to fully charge.
Was this helpful? Thank you for your feedback! -
Due to compatibility issue, clear the Harman Kardon One app cache and try to update it again.
Was this helpful? Thank you for your feedback!
