PT 2300
Stereo Preamp/Tuner
Sold from 1993 until 1995
| Made in: | Japan |
|---|
Documents & Downloads
Specifications
- Usable Sensitivity
- FM... MONO – 11.2dB
- Quieting Sensitivity
- FM... STEREO – 37.2dB
- Signal-to-Noise Ratio
- FM... MONO – 80dB @ 65dB
- Signal-to-Noise Ratio
- FM... STEREO – 74dB @ 65dB
- Capture Ratio
- FM... 1.5dB
- Alternate Channel Selectivity
- FM... 70dB
- Selectivity
- FM... ADJACENT CHANNEL – 5dB
- IF Rejection
- FM... 80dB
- Image Rejection
- FM... 45dB
- AM Rejection
- FM... 45dB
- Stereo Separation
- FM... 50dB (@ 1kHz, 65dBf)
- Total Harmonic Distortion
- FM... MONO – 0.08% @ 1kHz, 65dBf
- Total Harmonic Distortion
- FM... STEREO – 0.09% @ 1kHz, 65dBf
- Sensitivity
- AM... EXTERNAL ANTENNA – 25uV
- Alternate Channel Selectivity
- AM... 55dB
- Image Rejection
- AM... 40dB
- IF Rejection
- AM... 40dB
- Output Level/Impedance
- 0.8 Volts @ < 0.005% THD (10 ohms Load, 20Hz – 20kHz)
- Output Level/Impedance
- MAXIMUM – 6.0 Volts (0.1% THD)
- Output Level/Impedance
- 620 ohms
- Output Level/Impedance
- SUBWOOFER – 2.0V/10k ohms
- Negative Feedback
- 18dB
- Frequency Response
- 0.5Hz – 200kHz (±3dB)
- Slew Rate
- 50 Volts/Sec
- Rise Time
- 1.5usec
- Transient Intermodulation Distortion (TIM)
- Unmeasurable
- Signal-to-Noise Ratio
- PHONO MM – 88dB
- Signal-to-Noise Ratio
- CD, AUDIO/VIDEO & TAPE – 96dB
- Input Level/Impedance
- PHONO MM – 2.2mV/47k ohms, 125pF
- Input Level/Impedance
- CD, AUDIO/VIDEO & TAPE – 135 mV/22k ohms
- RIAA Equalization
- ±0.5dB (20Hz - 20kHz)
- Phono Overload
- 100mV
- Tone Controls
- BASS – ±10dB @ 50Hz
- Tone Controls
- TREBLE – ±10dB @ 10kHz
- Loudness Control
- 50Hz @ -40dB
Dolby Pro Logic decoding never sounded - or looked - so good. A full-function Dolby Pro Logic preamp/tuner with 5 audio inputs, 3 video inputs, and VCR-dubbing capability. Front, center, surround and subwoofer outputs, along with a system remote and more, complete this powerful, elegant package. Amplifier required. Factory
Images & Videos
