AVAP 5G
AVR5 Receiver & AVS10 Speaker System - 6PC
Sold from 1999 until 2000
Documents & Downloads
Specifications
- Power Requirements
- 120V AC/60Hz
- Power Consumption
- Receiver… 72W idle, 332W maximum (2 channels driven)
- MSRP U.S.
- $699.95 per system
- Dimensions
- Receiver… Width 17-2/5 inch (442mm)
- Dimensions
- Receiver… Height 6-1/8 inch (156mm)Height measurement includes feet and chassis.
- Dimensions
- Receiver… Depth 16-5/16 inch (415mm) Depth measurement includes knobs, buttons and terminal connections.
- Dimensions (H x W x D)
- SATELLITES… 7 x x 4 3/4 x 3 3/4
- Dimensions (H x W x D)
- CENTER… 4 3/4 x 10 1/2 x 3 3/4
- Dimensions (H x W x D)
- SUB… 11 1/2 x 11 1/2 x 11 1/2
- Weight
- Receiver… 24.6lbs (11.2kg)
- Television Format
- NTSC
- Input Level/Impedance
- 1Vp-p/75 ohms
- Output Level/Impedance
- 1V/75 ohms
- Video Frequency Response
- 10Hz to 8MHz (-3dB)
- Frequency Range
- AM... 520 – 1710kHz
- Frequency Range
- FM... 87.5 – 108MHz
- Signal-to-Noise Ratio
- AM... 43dB
- Usable Sensitivity
- FM... IHF 1.3?V/13.2dBf
- Signal-to-Noise Ratio
- FM... 70dB Mono ( measured at amV RF Input Level)
- Usable Sensitivity
- AM... Loop 500µV/M
- Distortion
- AM... 1kHz, 50% Mod. 0.8%
- Signal-to-Noise Ratio
- FM... 68dB Stereo ( measured at amV RF Input Level)
- Distortion (Mono/Stereo)
- FM... 0.3%/0.5%
- Selectivity
- AM... ± 10kHz, 30dB
- Stereo Separation
- FM... 40dB @1kHz
- Selectivity
- FM... ± 400kHz, 65dB
- Image Rejection
- FM... 40dB
- IF Rejection
- FM... 110dB
- Tuner Output Level
- FM... 1kHz, ±75kHz Dev 500mV
- Frequency Response
- 45Hz – 150kHz
- Crossover Frequency(ies)
- continuously variable 50Hz – 150Hz
- Input Impedance
- 200k ohms (high level)
- Input Impedance
- 10 ohms (low level)
- Recommended Amplifier Power (RMS)
- 50 Watts
- Subwoofer Transducer
- specially designed 8 inch polycone
- Frequency Response
- 200Hz – 20kHz
- Crossover Frequency(ies)
- 5kHz
- Nominal Impedance
- compatible with 8 ohms
- Low-Frequency Transducer (Woofer)
- 3-1/2 inch shielded
- High-Frequency Transducer (Tweeter)
- .5 inch (13mm) polycarbonate tweeter with acoustic lens
- Frequency Response
- 150Hz – 20kHz
- Crossover Frequency(ies)
- 5kHz
- Nominal Impedance
- compatible with 8 ohms
- Low-Frequency Transducer (Woofer)
- 3-1/2 inch shielded
- Continuous Average Power (FTC) per Channel (stereo mode)
- 45 Watts per channel, 20Hz – 20kHz @ <0.08% THD, both channels driven into 8 ohms
- Amplifier Power (RMS)
- SURROUND MODES... Front L&R channels... 35 Watts per channel, 20Hz – 20kHz @ <0.08% THD into 8 ohms
- Amplifier Power (RMS)
- SURROUND MODES... Surround channels... 35 Watts per channel, 20Hz – 20kHz @ <0.08% THD into 8 ohms
- Amplifier Power (RMS)
- SURROUND MODES… Center channel... 35 Watts @ <0.08% THD, 20Hz – 20kHz into 8 ohms
- High Instantaneous Current Capability (HCC)
- ± 35 Amps
- Input Level/Impedance
- 200mV/47k ohms - Linear (High-Level)
- Signal-to-Noise Ratio
- 92dB (IHF-A)
- Pro Logic Decoding
- 40dB
- Frequency Response
- 8Hz – 120kHz (+0/-3dB @ 1 watt)
- Transient Intermodulation Distortion (TIM)
- Not Measurable
- Rise Time
- 16µsec
- Slew Rate
- 40V/µsec
We've matched one of our most popular Dolby Pro Logic receivers, AVR5, with 5 AVS10 speakers (1/2 inch tweeter, 3-1/2 inch woofer) and included an 8 inch 50-watt Powered Sub for a system that will turn viewing an ordinary TV into a Home Cinema experience that will truly astound you. Receiver Reconditioned.
Images & Videos
