AVAP 2G
AVR20 MKII Receiver & AVS10 Speaker System - 6PC
Sold from 1997 until 1999
Documents & Downloads
Specifications
- Audio Inputs
- 3 line, 1 phono
- Audio Tape Loops
- 2
- Audio/Video Inputs
- 2
- Audio/Video Loops
- 1
- Preamp Outputs
- main, center, rear, sub
- Power Amp Inputs
- main
- Video Outputs
- 2
- Amplifier Power (RMS)
- STEREO – 60 watts per channel @ 8 ohms
- Total Harmonic Distortion
- 0.09% @ 8ohms
- Amplifier Power (RMS)
- 50 watts (8 ohms) Surround Mode (front - per channel - 8 ohms)
- Total Harmonic Distortion
- 0.3% (center @ 8 ohms)
- Amplifier Power (RMS)
- 50 watts (8 ohms) Surround Mode (center - per channel - 8 ohms)
- Amplifier Power (RMS)
- 20 watts (8 ohms) Surround Mode (rear - per channel - 8 ohms)
- High Instantaneous Current Capability (HCC)
- ± 30 Amps
- Negative Feedback
- 26dB
- Selectivity
- ADJACENT – 5dB
- IF Rejection
- FM – 100dB
- Stereo Separation
- 45dB
- Sensitivity
- EXTERNAL ANTENNA – 25 microvolts
- Total Harmonic Distortion
- MONO – 0.2% @ 1kHz
- Frequency Response
- 0.5Hz – 150kHz (+0/-3dB)
- Slew Rate
- 80 v/microsecond
- Rise Time
- 1.8 microseconds
- Transient Intermodulation Distortion (TIM)
- unmeasurable
- Signal-to-Noise Ratio
- 74dB (phono)
- Signal-to-Noise Ratio
- CD, VIDEO, etc – 93dB (Aux Input)
- Input Level/Impedance
- PHONO – 2.5 mv/47k ohms
- Input Level/Impedance
- CD, VIDEO, etc – 150 mv/22k ohms
- RIAA Equalization
- ±1dB
- Phono Overload
- 140mv
- Bass Control
- Tone Control... ±10dB @ 100Hz
- Treble Control
- ±10dB @ 10kHz
- Loudness Control
- +7dB @ 100Hz & +3dB @ 10kHz
- Usable Sensitivity
- MONO – 11.2dB
- Quieting Sensitivity
- STEREO – 37.2dBf
- Signal-to-Noise Ratio
- 74dB/70dB (Mono/Stereo)
- MSRP U.S.
- $1099.95 per system
- Weight
- 23.6lb Receiver
- Dimensions (H x W x D)
- RECEIVER… 5 1/2 x 17 1/2 x 14 15/16
- Dimensions (H x W x D)
- SATELLITES… 7 x x 4 3/4 x 3 3/4
- Dimensions (H x W x D)
- CENTER… 4 3/4 x 10 1/2 x 3 3/4
- Dimensions (H x W x D)
- SUB… 11 1/2 x 11 1/2 x 11 1/2
- Alternate Channel Selectivity
- FM... 65dB
- AM Rejection
- FM... 55dB
- Alternate Channel Selectivity
- AM... 55dB
- Image Rejection
- AM... 35dB
- IF Rejection
- AM... 60dB
- Total Harmonic Distortion
- FM... 0.3% @ 1kHz
- Capture Ratio
- FM... 2.0dB
- Frequency Response
- 45Hz – 150kHz
- Crossover Frequency(ies)
- continuously variable 50Hz – 150Hz
- Input Impedance
- 200k ohms (high level)
- Input Impedance
- 10 ohms (low level)
- Recommended Amplifier Power (RMS)
- 50 Watts
- Subwoofer Transducer
- specially designed 8 inch polycone
- Frequency Response
- 200Hz – 20kHz
- Crossover Frequency(ies)
- 5kHz
- Nominal Impedance
- compatible with 8 ohms
- Low-Frequency Transducer (Woofer)
- 3-1/2 inch shielded
- High-Frequency Transducer (Tweeter)
- .5 inch (13mm) polycarbonate tweeter with acoustic lens
- Frequency Response
- 150Hz – 20kHz
- Crossover Frequency(ies)
- 5kHz
- Nominal Impedance
- compatible with 8 ohms
- Low-Frequency Transducer (Woofer)
- 3-1/2 inch shielded
Images & Videos
