JBL Omni Bar Plus

JBL Omni Bar Plus

Wireless HD Soundbar

Getting started with your JBL Omni Bar Plus

Getting started with your JBL Omni Bar Plus

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Soundbar amplifier power
30W x 4
Power consumption in sleep mode
<3 Watts
Note
The OMNI BAR+ is intended to be used for streaming music via Bluetooth and Wi-Fi technology. This product is designed to be instantly on and ready to play music at a moment's notice, therefore, the Bluetooth and Wi-Fi must remain active at all times to ensure proper operation. The OMNI BAR+ is in compliance with the European Union energy legislation. It will enter into sleep mode (networked standby) after 10 minutes without operation, after which it can be re-activated via Bluetooth or Wi-Fi.
Soundbar
4 x 60mm (2.25”) woofers, 2 x 20mm (0.75”) tweeters
Subwoofer
1 x 166mm (6.5”)
One HDMi® output with Audio Return Channel (ARC) and CEC support
Bluetooth® connectivity
Google Cast for audio
Spotify Connect
One stereo analog-audio input
One optical digital input
WIFI connectivity with DLNA 1.5 support
One USB port for software update only
Remote control that conveniently allows you to control all Omni Bar functionality

Enjoy your favorite movie and music with wireless, room-filling sound.

The Harman Kardon Omni Bar+ needs just one cable to connect to your HD TV and lets you easily set up a wireless HD music system in your home. It also adds access to music streaming services such as Spotify Connect and Chromecast built-in. With Dolby Digital and the included Sub Woofer you can have new home theater and because it can connect to any Harman Kardon Omni+ speakers, you can easily set up a whole home wireless music system.

The Omni Bar+ and subwoofer give you an unmatched home theater listening experience with just a single HDMI cable connection.
Seamlessly stream your favorite music to any Harman Kardon Omni+ wireless products. Listen to different music in any room in your home.
The Harman Kardon Omni Bar + supports full 5.1 discrete surround sound. So you can wirelessly set up a multi-channel home theater with no cables required.
Stream your favorite songs and playlists wirelessly around your home with Spotify Connect, using the Spotify app as a remote. Spotify Connect feature requires Spotify Premium subscription.
With Chromecast built-in, you can cast your
 favorite music, radio stations and podcasts from your mobile device to your speakers. Chromecast built-in may require subscription(s).
The Harman Kardon Omni Bar+ supports 24bit / 192kHz HD audio streaming. Enjoy a superior audio experience, with higher audio quality than from a CD.
Easily set up your system and control it with the Harman Kardon Controller app. With additional support for WAS on Apple devices and a step by step in-app guide you can quickly start playing music.
Supports the latest 802.11AC wireless home networking technology and dual band (both 2.4GHz and 5GHz) Wi-Fi connection, resulting in a faster, robust and more stable wireless connection.
Connect any device via Bluetooth, Optical, HDMI or aux input to your Omni Bar+ and it will automatically steam your music to any other Harman Kardon Omni+ speakers in your home wirelessly.

FAQs & How-Tos

13 results
  • No, since the OMNI BAR+ does not have any HDMI input connections, it is only your source, connected to the TV, (and of course your TV) that need to be 4K compatible.
  • Yes, press and hold the Surround button on the OMNI BAR+ until it starts to blink amber. You are now in pairing mode. Press Volume+ on your OMNI BAR+, then press Volume+ on your remote control. The surround button will quickly flash white, to indicate it has learned Volume+. Repeat for Volume-, and Mute, and then hold down the Surround button to exit remote control learning.
  • There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.
  • On the back of your OMNI BAR+ there is a reset button. Hold it down for 5 seconds, until the round button LED lights up in white. The product is now reset and ready to be set up again.
  • The OMNI BAR+ as standalone system is 2.1, however when using it in a 5.1 wireless surround system, it generates a virtual acoustic center speaker to complete the 5.1 Surround system. In that combination it will be a 3.1 system.
  • One explanation can be that your OMNI 50+ is part of a 5.1 system with your Omni Bar, which will make the surround OMNI 50+ left and right rear speakers act as "secondary", and Bluetooth connection is not possible to secondary speakers. To use the OMNI 50+ as a portable speaker again, simply perform a reset of the speaker by pressing the reset button for 5 seconds. Please note that after resetting your OMNI 50+, it is no longer part of the 5.1 wireless system.
  • Do not worry, pairing both devices is easy and quick. Press the "pairing" button on the back of the Omni Bar, then press "pairing" button on the subwoofer. They will start communicating with each other, and when both devices show white light in the LED on the back, that indicates that they are paired.
  • No, that is not possible. However, you can create a 5.1 wireless surround system to extend your TV or movie sound. All you need is two additional OMNI+ speakers, such as 2 x OMNI 10+, OMNI 20+ or OMNI 50+.
  • If you experience a problem with setup using an Android 7.0 or higher device, please perform the following steps: First, force stop the HK Controller app from running in background. Second, go to your phone or tablet Wi-Fi settings, find the Omni speaker setup Wi-Fi network, and select “Forget Network”.Third, reopen the HK Controller app and begin the setup process again. After performing these steps, you will be able to complete the setup process for your speakers.
  • All products must be on Wi-Fi 5GHz network, and you need two additional OMNI+ speakers of the same model (2 x OMNI 20+ for example) to create 5.1 wireless surround sound.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: +60 377240321

Mon - Fri - 8:00 a.m 5:00 p.m (MYT)

E-mail us

E-mail us

365 days a year

We will respond within one business day.

Email us
Chat with us

Chat with us

Mon - Fri - 8:00 a.m 5:00 p.m (MYT)

message

Text Us

Chat with a support agent via SMS at:
601130116117

Mon - Fri: 8:00 am - 5:00 pm (MYT)