Omni 10
Wireless HD loudspeaker
Getting started with your Omni 10
Documents & Downloads
Product Specifications
- Bluetooth
- Transducers
- 1 x 90mm woofer, 1 x 35mm tweeter
- Rated Power
- 1 x 25W for woofer; 1 x 25W for tweeter
- Bluetooth Transmitter Frequency Range
- 2402 − 2480MHz
- Bluetooth Transmitter Power
- less than 4dBm
- Bluetooth Transmitter Modulation
- GFSK, 3.14/4 DQPSK, 8DPSK
- 2.4G Wi-Fi Transmitter Frequency Range
- 2412 − 2472MHz
- 2.4G Wi-Fi Transmitter Power
- less than 20dBm (EIRP)
- 2.4G Wi-Fi Modulation
- OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
- 2.4G Wi-Fi Network Compatibility
- IEEE 802.11b/g/n
- Weight (g)
- 1340
- Power consumption in sleep mode
- 2.43 Watts/Hour
- Note - The HK Omni 10 is intended to be used for streaming music via Bluetooth and Wi-Fi technology. This product is designed to be instantly on and ready to play music at a moment's notice. The HK Omni 10 is in compliance with the European Union energy legislation. It will enter into sleep mode (networked standby) after 10 minutes without operation, after which it can be re-activated via Bluetooth or Wi-Fi.
- Frequency Response
- 52Hz - 20kHz @-6dB
- Signal-to-Noise Ratio
- >80dB
- Width (mm)
- 181
- Width (in)
- 7-1/8
- Depth (mm)
- 159
- Depth (in)
- 6-1/4
- Height (mm)
- 166
- Height (in)
- 6-9/16
Wireless room-filling sound at the touch of a button
The Harman Kardon Omni 10 is a wireless, truly HD audio system. It fills your room with pure, crisp sound thanks to Harman’s expertise in audio technology. Now the music doesn’t stop no matter where you are in your home. Simply set up multiple speakers and enjoy wireless room filling sound at the touch of a button. Play different music in different rooms or stream the same song throughout your house with party mode. Our app and Bluetooth capability let you access any music from your phone or your favorite apps seamlessly.
FAQs & How-Tos
-
No, stereo pairs must be two of the same type of speaker. For example, two Omni 10 or two Omni 10+ speakers will work, but not one Omni 10 and one Omni 10+.Was this helpful? Thank you for your feedback!
-
Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.Was this helpful? Thank you for your feedback!
-
There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.Was this helpful? Thank you for your feedback!
-
Make sure you disable AP/Client isolation on your Access Point / Extender and that Multicast forwarding is not disabled between the W-Fi networks. However, we cannot guarantee than streaming will work flawless as Extender networks are tricky and can cause many issues. Always use a 5GHz Wi-Fi network extender for best results.Was this helpful? Thank you for your feedback!
-
Unfortunately, some Huawei phones are not able to stream music from the HK Controller app to 1st generation Omni speakers. However, the new Omni 10+, 20+, and 50+ have fixed this issue, and you will be able to stream music to them using your Huawei phone.Was this helpful? Thank you for your feedback!
-
To have the best possible performance for OMNI+ system we advise to have a dual-band router with a powerful chipset and ram for best Wi-Fi performance. This will not only help our products to perform better and more stable, but your other devices at home will have more power and fewer interruptions. Please also be sure that your home Wi-Fi router has Multicast enabled, as our Omni+ system requires this feature enabled in order to work (same goes for Chromecast devices). Always connect our Omni+ system to 5 GHz Wi-Fi whenever possible to limit the risk of devices being slow or interrupted on 2.4GHz Wi-Fi.Was this helpful? Thank you for your feedback!
-
Yes, they will work together. You can link rooms containing 1st generation Omni speakers with rooms containing 2nd generation Omni speakers and listen to the same music across all of them. Since the 2nd generation has a more powerful processor, we recommend connecting external sources like AUX or Bluetooth to the 2nd generation speakers rather than the 1st generation.Was this helpful? Thank you for your feedback!
-
Yes, they are backward compatible with your existing Omni speakers.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Talk to a product expert
Call us now at:
+60 377240321
Mon - Fri - 8:00 a.m 5:00 p.m (MYT)
Chat with us
Mon - Fri - 8:00 a.m 5:00 p.m (MYT)