How To

How To

140 results
  • (+) Button A short press will increase the volume. A long press will skip to the next track. (-) Button A short press will decrease the volume. A long press will skip back a track. Middle (Multifunction Button) A short press will play/pause music or answer/end calls. A long press on the middle button will turn the device on/off.
  • All AVR models up to and including 151S, 161S and 171S feature HDCP version 1.4. (High-bandwidth Digital Content Protection). This is also true for BDS 280, 580, 280S and 580S. It is not possible to update to version 2.2 with any software/firmware update, as this requires a hardware change. Future models may feature version 2.2, made for UHD/4k content.
  • JBL Connect+ can wirelessly link more than 100 JBL Connect+ enabled speakers together to amplify the party
  • The Omni 50+ rated power with AC power connected is 4 X 25 Watt. When using battery only, the rated power is 4 X 15 Watt.
  • Both the OMNI BAR+ and its subwoofer have 200W of power amplification, which means that total system power is 400 W.
  • The Onyx Studio 8 features Wireless Stereo Boost which allows you to connect two Onyx Studio 8 speakers together for a more powerful listening experience. Please note: You cannot connect the Onyx Studio 8 to other Onyx Studio speakers such as the Onyx Studio 7, 6 and 5.
  • The Vi headphones have a couple different sensors, including a touch sensor (for interacting with Vi), a gyroscope (for rotational motion), accelerometer (for movement or vibrations) and a barometer (for elevation / atmospheric pressure). Plus they house a “custom” sensor that uses visible-light and infrared LEDs along with photodiodes, all in the left ear bud, to determine your heart rate. The headphones can also talk to your iPhone/Android's GPS and Wi-Fi to help with figuring out location and other information.
  • To have the best possible performance for OMNI+ system we advise to have a dual-band router with a powerful chipset and ram for best Wi-Fi performance. This will not only help our products to perform better and more stable, but your other devices at home will have more power and fewer interruptions. Please also be sure that your home Wi-Fi router has Multicast enabled, as our Omni+ system requires this feature enabled in order to work (same goes for Chromecast devices). Always connect our Omni+ system to 5 GHz Wi-Fi whenever possible to limit the risk of devices being slow or interrupted on 2.4GHz Wi-Fi.
  • To set up the Harman Kardon Adapt in the HK Controller app, you have to select "One speaker", not the Adapt+ option. When selecting "One speaker", simply follow the on-screen instructions to install your Adapt on the Wi-Fi network. Note that the instructions for Adapt devices will appear on your screen after 30-45 seconds (Only Apple devices).
  • In Amazon's app called Alexa. There you can set, change and login with your favorite supported music service. They offer Amazon Music, Spotify, Pandora and much more. Go to settings in the Alexa app, select "Music & Media.
  • The Harman Kardon Aura Studio 2 features: Bluetooth v.4.1 A2DP v.1.3 AVRCP v.1.5
  • For OMNI BAR+, three sources are available: HDMI (not applicable for ADAPT+), Optical or AUX input. For Adapt+ two sources are available: Optical in/outputs and Analog in/outputs. If you select "Watching movies and TV shows" in the HK controller app for either one of them, you will have a very little delay and good lip sync with the TV for video applications. However, you will not be able to rebroadcast the TV signal to other OMNI+ speakers when selecting this mode. If you select "Listening to music", you will be able to rebroadcast TV signal to other OMNI+ speakers in your house, however, you will have lip sync delay with video material. Select that specific mode if you use HDMI (not applicable for ADAPT+), Optical or AUX for music only. Using Chromecast, Spotify Connect or Bluetooth is not part of these modes. When using one of these streaming methods, you are able to rebroadcast any music source.
  • Enchant series information

    The Enchant series is not only a beautifully designed speaker, but it also delivers the sound to a completely new level.
    Always wanted to have Surround Sound, but never wanted extra speakers, with the MultiBeam feature you can get Surround Sound experience right at your fingertips.

    Enchant 1300 for Bigger rooms

    1. Perfect for bigger rooms that requires a bit more sound and punch when watching or listening to music!
    2. Powerful sound with 13 Channels in one speaker with a maximum of 240W
    enchant
    1. Features MultiBeam technology for Surround Sound experience.
    2. 4K HDR10 compatible on both HDMI Inputs and output (ARC).
    3. HDCP 2.2 Compatible
    4. Google Cast built-in, stream your favorite music through your Wi-Fi connection.
    5. Bluetooth 4.2 technology for easy streaming with any of your mobile devices.
    6. And much more!

    Enchant 800 for Smaller rooms

    1. Perfect for smaller rooms to extend the sound performance in any situation.
    2. Powerful sound with 8 Channels in one speaker with a maximum of 180W
    Enchant 800
    1. Smaller in size compared to Enchant 1300, but just as an amazing sound.
    2. Features MultiBeam technology for Surround Sound experience.
    3. 4K HDR10 compatible on both HDMI Input and output (ARC).
    4. HDCP 2.2 Compatible
    5. Google Cast built-in, stream your favorite music through your Wi-Fi connection.
    6. Bluetooth 4.2 technology for easy streaming with any of your mobile devices.
    7. And much more!
  • USB files

    NOTES

    • Only file names that contain numbers or English characters can be displayed, otherwise “UNKNOWN” will be displayed.
    • “UNSUPPORTED” is displayed when the file format is not supported.
    • Do not extract the USB device while in operation.
    • For a large capacity USB, it may take longer than a few minutes to be searched. USB with more than 2000 files cannot be supported.
    • Devices which require additional program installation connected to a computer are not supported.
    • The USB port of the soundbar cannot be connected to a computer and it cannot be used as a storage device.
    • The exFAT and NTFS file system is not supported. FAT16/FAT32 systems are available.
    • Depending on some devices, it may not be available to recognize the followings on the soundbar: External HDD; Card readers; Locked devices; Hard type USB devices; USB hub; Using USB extension cable; iPhone/iPod/iPad; Android device.
  • HTFS 3 will match these speakers sets: HKTS 20, HKTS 30, HKTS 60, HKTS 65 and HKTS 200. HTFS 2 will match these speakers sets: HKTS 9, HKTS 16 and HKS 4 satellite speakers.
  • Using Wi-Fi allows you to listen to your music in a higher sound quality since Bluetooth protocol compresses the audio signal, where Wi-Fi data easily stream HD Audio content. Take calls without interrupting your current audio music, where Bluetooth will interrupt the stream, because it is a one-way protocol. Control your music from anywhere in the house, where Bluetooth have a limited range. Play the same music across multiple speakers and when using the newest connect features, such as Spotify Connect or Chromecast built-in, then you don't have to worry about battery life, since the devices playing is doing all the data transmission compared to Bluetooth, where it is data between source and device.
  • Yes, they will work together. You can link rooms containing 1st generation Omni speakers with rooms containing 2nd generation Omni speakers and listen to the same music across all of them. Since the 2nd generation has a more powerful processor, we recommend connecting external sources like AUX or Bluetooth to the 2nd generation speakers rather than the 1st generation.
  • Yes, they are backward compatible with your existing Omni speakers.
  • Yes, our OMNI BAR+ supports standard CEC features such a wake-up and volume control via HDMI. Optical and analog input signals can wake up the Omni Bar, but if the source signal is too weak, the OMNI BAR+ will not wake up.
  • Wireless Network connection is lost or not connected anymore

    In case you have lost the Wireless Network connection, recently changed your Wireless name/password, or changed your ISP (service provider), you may need to set up your Citation device again. 

    Follow our steps below to try fixing the issue and reconnecting your device again.

    1. Open your Google Home app Google Home app.
    2. In the top right corner of the home screen, tap Devices Devices to see your available devices. 
    3. Scroll to find the Citation device card. 
    4. Tap SET UP and complete the setup steps.
    5. All of your previous settings, account information is still attached to the speaker. You only need to add it again to your Wireless Network.
    Note: The name of your Citation device might be a room name such as "Living Room Speaker", simply tap the SET UP.
     

    Wireless Network connection failed

    If the above solution did not work and you still have issues with connecting to your new Wireless Network, then try following these steps:
    1. Reboot your Wireless router. In many cases it can help a lot with a little reboot!
    2. Reset your Citation device.
      1. Press and hold down the RESET BUTTON for 15 seconds, the front LED will light up indicating it has been reset.
      2. Your Citation device will now boot-up again. It can take roughly 45 seconds until it is ready.
    3. Try to set it up again via your Google Home appGoogle Home app
< 1 2 3 4 5 >

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: +60 377240321

Mon - Fri - 8:00 a.m 5:00 p.m (MYT)

E-mail us

E-mail us

365 days a year

We will respond within one business day.

Email us
Chat with us

Chat with us

Mon - Fri - 8:00 a.m 5:00 p.m (MYT)

message

Text Us

Chat with a support agent via SMS at:
601130116117

Mon - Fri: 8:00 am - 5:00 pm (MYT)