How To
How To
140 results
-
(+) Button A short press will increase the volume. A long press will skip to the next track. (-) Button A short press will decrease the volume. A long press will skip back a track. Middle (Multifunction Button) A short press will play/pause music or answer/end calls. A long press on the middle button will turn the device on/off.Was this helpful? Thank you for your feedback!
-
All AVR models up to and including 151S, 161S and 171S feature HDCP version 1.4. (High-bandwidth Digital Content Protection). This is also true for BDS 280, 580, 280S and 580S. It is not possible to update to version 2.2 with any software/firmware update, as this requires a hardware change. Future models may feature version 2.2, made for UHD/4k content.Was this helpful? Thank you for your feedback!
-
JBL Connect+ can wirelessly link more than 100 JBL Connect+ enabled speakers together to amplify the partyWas this helpful? Thank you for your feedback!
-
The Omni 50+ rated power with AC power connected is 4 X 25 Watt. When using battery only, the rated power is 4 X 15 Watt.Was this helpful? Thank you for your feedback!
-
Both the OMNI BAR+ and its subwoofer have 200W of power amplification, which means that total system power is 400 W.Was this helpful? Thank you for your feedback!
-
The Onyx Studio 8 features Wireless Stereo Boost which allows you to connect two Onyx Studio 8 speakers together for a more powerful listening experience. Please note: You cannot connect the Onyx Studio 8 to other Onyx Studio speakers such as the Onyx Studio 7, 6 and 5.Was this helpful? Thank you for your feedback!
-
The Vi headphones have a couple different sensors, including a touch sensor (for interacting with Vi), a gyroscope (for rotational motion), accelerometer (for movement or vibrations) and a barometer (for elevation / atmospheric pressure). Plus they house a “custom” sensor that uses visible-light and infrared LEDs along with photodiodes, all in the left ear bud, to determine your heart rate. The headphones can also talk to your iPhone/Android's GPS and Wi-Fi to help with figuring out location and other information.Was this helpful? Thank you for your feedback!
-
To have the best possible performance for OMNI+ system we advise to have a dual-band router with a powerful chipset and ram for best Wi-Fi performance. This will not only help our products to perform better and more stable, but your other devices at home will have more power and fewer interruptions. Please also be sure that your home Wi-Fi router has Multicast enabled, as our Omni+ system requires this feature enabled in order to work (same goes for Chromecast devices). Always connect our Omni+ system to 5 GHz Wi-Fi whenever possible to limit the risk of devices being slow or interrupted on 2.4GHz Wi-Fi.Was this helpful? Thank you for your feedback!
-
To set up the Harman Kardon Adapt in the HK Controller app, you have to select "One speaker", not the Adapt+ option. When selecting "One speaker", simply follow the on-screen instructions to install your Adapt on the Wi-Fi network. Note that the instructions for Adapt devices will appear on your screen after 30-45 seconds (Only Apple devices).Was this helpful? Thank you for your feedback!
-
In Amazon's app called Alexa. There you can set, change and login with your favorite supported music service. They offer Amazon Music, Spotify, Pandora and much more. Go to settings in the Alexa app, select "Music & Media.Was this helpful? Thank you for your feedback!
-
The Harman Kardon Aura Studio 2 features: Bluetooth v.4.1 A2DP v.1.3 AVRCP v.1.5Was this helpful? Thank you for your feedback!
-
For OMNI BAR+, three sources are available: HDMI (not applicable for ADAPT+), Optical or AUX input. For Adapt+ two sources are available: Optical in/outputs and Analog in/outputs. If you select "Watching movies and TV shows" in the HK controller app for either one of them, you will have a very little delay and good lip sync with the TV for video applications. However, you will not be able to rebroadcast the TV signal to other OMNI+ speakers when selecting this mode. If you select "Listening to music", you will be able to rebroadcast TV signal to other OMNI+ speakers in your house, however, you will have lip sync delay with video material. Select that specific mode if you use HDMI (not applicable for ADAPT+), Optical or AUX for music only. Using Chromecast, Spotify Connect or Bluetooth is not part of these modes. When using one of these streaming methods, you are able to rebroadcast any music source.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call with our experts
Talk to a product expert
Call us now at:
+959-97-400-5050
TMW Address : No. (7/B), Maharsi Sarsana Yakethar street, Bahan Tsp, Yangon, Myanmar
Mon - Sat - 8:00 a.m 5:00 p.m
