ドキュメントとダウンロード
製品仕様
- MSRP U.S.
- $429.95 each
- Dimensions (H x W x D)
- 4-13/16 x 17-3/8 x14-1/2
- Usable Sensitivity
- FM MONO – 1.9uV
- Quieting Sensitivity
- FM MONO – 3.1uV
- Quieting Sensitivity
- FM STEREO – 37uV
- Signal-to-Noise Ratio
- FM STEREO – -75dB
- Capture Ratio
- FM... 1.0dB
- Alternate Channel Selectivity
- AM... 50dB
- Alternate Channel Selectivity
- FM... 70dB
- IF Rejection
- 95dB AM – 25dB
- AM Rejection
- FM... 60dB
- Stereo Separation
- 45dB (1kHz)
- Total Harmonic Distortion
- FM MONO – 0.1% 1kHz, 100% modulation
- Total Harmonic Distortion
- FM STEREO – 0.15% 1kHz, 100% modulation
- Sensitivity
- AM... AM – 300uV/m
- Selectivity
- AM – 35dB
- Image Rejection
- AM – 40dB
- Amplifier Power (RMS)
- 45 watts per channel @ <0.03% THD primarily low order harmonics @ 8 ohms from 20Hz – 20kHz
- Power Bandwidth
- HALF POWER – <10Hz – 60kHz with 8 ohms
- Frequency Response
- <1Hz – 150kHz (+0/–3dB @ rated output)
- Total Harmonic Distortion
- 0.02% primarily low order harmonics 1kHz @ rated output
- Transient Intermodulation Distortion (TIM)
- 0.09% @ rated output
- High Instantaneous Current Capability (HCC)
- ± 20 Amps
- Slew Rate
- 65 volts/uSec
- Rise Time
- SQUARE WAVE – better than 1.9uSec @ 20kHz
- Square Wave Tilt
- <3% @ 20Hz
- Negative Feedback
- 25dB
- Damping Factor
- >50 @ 8 ohms, 20Hz – 20kHz
- Hum and Noise
- PHONO – -85dB A-WTD
- Hum and Noise
- AUX – -90dB A-WTD
- Input Sensitivity
- PHONO – 2.2mV AUX – 150mV
- Phono Input Sensitivity
- RESISTANCE 47k ohms
- Phono Input Sensitivity
- CAPACITANCE 125pF
- Phono Overload
- >130mV
- RIAA Equalization
- ±0.75dB
Stereo Receiver (45 watts x 2)
画像&ビデオ
なにかお困りですか?
チャットでのお問い合わせ
受付時間: 土日・祝日・年末年始を除く、平日9:30~17:30