How To
How To
369 results
-
Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.Was this helpful? Thank you for your feedback!
-
Yes, in case your Wi-Fi does not work then simply press and hold the Bluetooth button for 3 seconds, your speaker is now in pairing mode. The button is located on the back where you connect the power cord. Please be aware that Alexa will not work on Bluetooth.Was this helpful? Thank you for your feedback!
-
There is a buffer inside the speakers that processes the incoming signal. This buffer delays the audio signal compared to the video signal, causing a delay. For this, we do not recommend using Omni+ speakers with a TV. Our Omni bar will work with your TV sound and you can create wireless 5.1 surround sound system with the Omni bar.Was this helpful? Thank you for your feedback!
-
Yes, you can easily charge your OMNI 50+ while charging another device via USB port.Was this helpful? Thank you for your feedback!
-
This is not supported at this time, but the upcoming Omni+ speakers will support Google Chromecast built-in, which has support for many Internet radio services such as TuneIn Radio.Was this helpful? Thank you for your feedback!
-
JBL Playlist: Yes, it can be used with Bluetooth out of the box, and also Chromecast (setup is done via Google Home, but speaker does not have Google Assistant built-in) JBL Link Bar: Yes, it can be used with Bluetooth and Chromecast after setting the bar up with a Google account - choosing not to activate the Google Assistant. JBL Link Music: No, this speaker requires setup via Google Home JBL Link Portable: No, this speaker requires setup via Google Home JBL Link 10, 20 and Link View: No, these speakers requires setup via Google Home Harman Kardon Citation series: No, this speaker requires setup via Google Home Harman Kardon Allure: Yes, Bluetooth is available from factory settings. Every time it is powered on and off, the speaker will say "Now in setup mode, follow the instructions in the Harman Kardon Alexa App." Harman Kardon Allure Portable: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards. Harman Kardon Astra: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.Was this helpful? Thank you for your feedback!
-
We are sorry, but this is not possible, neither as software upgrade nor as mechanical modification.Was this helpful? Thank you for your feedback!
-
Wireless dual sound can be used to pair two speakers which has the wireless dual sound technology, Which are Aura Studio 2, GO+PLAY, Onyx studio 3, Onyx mini. Please note: Dual Wireless Sound only has the capability to connect no more than 2 speakers at a time. NOTE: The Onyx Studio 5, which also has Dual Wireless Sound, can NOT be used together with other products which feature DWS. Only 2 Onyx Studio 5's can pair with eachother.Was this helpful? Thank you for your feedback!
-
You have the option to turn the Noise Cancellation on and off by using the switch that is located on the right side of the NC box. When choosing the switch option, you will see a green light inside the the switch will indicate that the Noise Cancelation is on. To turn off the Noise Cancelation, move the switch down towards the cable and the green light will turn off. When charging this device with the micro USB charging cable included in the packaging, you will see the light turn orange to indicate that it is charging.Was this helpful? Thank you for your feedback!
-
It is not possible to connect further speakers (center or rear) to the system.
The Harman Kardon Radiance 2400 is a 2.1 sound system. With it's unique sound characteristics and sound dispersion, it can fill a large room with high quality sound.Was this helpful? Thank you for your feedback! -
General information about WiSA:
WiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.
For more information on WiSA technology, please go to the official WiSA website.
If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".
Citation Surrounds
Current WiSA Certified products:
Citation Sub
Citation Sub S
Citation Towers
Citation Bar
Current products making use of WiSA technology:
Citation Multibeam 700
HK surround
WiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.
Limitations:Was this helpful? Thank you for your feedback! -
The BDS 235 and 535 owner's manual states that you need an ADAPT to make your system wireless. You do it by connecting the BDS system's analog outputs to the ADAPT's analog AUX input. The ADAPT will then re-stream to your OMNI speakers wirelessly. However, if you listen to the OMNI speakers, and want to listen to the music directly from the BDS system at the same time, there will be a delay in the sound from the OMNI speakers. The BDS speakers will play the music first, and since the ADAPT needs to process the data wirelessly, a delay results. To avoid delay, please mute the BDS system, or connect from the ADAPT line-out to the BDS AUX in instead of the other way around. With this setup, you can only play to the BDS from an OMNI speaker, which will not be delayed in sound.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
WhatsApp Us
Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)