How To

Support Overview / How To

How To

369 results

Sort

Page size

Re-broadcasting any TV or Movie signal from your OMNI BAR+ or ADAPT+

No, that is not possible. However, you can create a 5.1 wireless surround system to extend your TV or movie sound. All you need is two additional OMNI+ speakers, such as 2 x OMNI 10+, OMNI 20+ or OMNI 50+.

Was this helpful? Thank you for your feedback!
Remote app does not recognize my AVR1x1S and AVR1x10S receiver?

Make sure you download the latest version of the app from the Apple App Store or Google Play (for Android devices). - Make sure you device is connected to the same wireless network as your AVR1x1S or AVR1x10S model and not on 3G/LTE.

Was this helpful? Thank you for your feedback!
Roon support

The Roon controller (DLNA) is not supported, but it is possible to use the Chromecast or Airplay from the Citation Amp to create a room within the Roon app (needs subscription with Roon).

Was this helpful? Thank you for your feedback!
Setting Line output fixed or variable

As default the line output is set to Fixed. You can change it to variable in the advanced settings.

Was this helpful? Thank you for your feedback!
Setup instructions for Android
1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Enable Bluetooth
4. Enable Location services
5. Open your Google Home app
  1. Make sure you have permitted the Google Home app to view your location.
6. First option Tap Add Set up device Set up new devices in your home
7. Second option Tap X device found Select Home location
8. Follow the instruction on screen to add your new Harman Kardon Citation speaker.
Still not sure how to connect, then watch this video below:
Was this helpful? Thank you for your feedback!
Setup instructions for Apple iOS devices
1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Open your Google Home app .
4. Enable Bluetooth
5. First option Tap Add Set up device Set up new devices in your home
6. Second option Tap X device found Select Home location
7. Follow the instruction on screen to add your new Harman Kardon Citation speaker.
Still not sure how to connect, then watch this video below:
Was this helpful? Thank you for your feedback!
Sometimes, if I remove the USB stick while playing from it, the BDS freezes.

Never remove a USB stick while the BDS is playing files from it. If the system freezes, switch the BDS unit OFF and then ON with the switch on the back panel to reset.

Was this helpful? Thank you for your feedback!
Sometimes my Chromecast enabled streaming app cannot see my Citation speaker. What should I do?

"In certain network conditions, your speaker may not be visible from your streaming app. You can still use voice control to start & control playback. If you wish to use your phone app to control playback, please power cycle your Citation speaker and your phone."

Was this helpful? Thank you for your feedback!
Sometimes when I watch HD or 3D material, I can see white specks or "snow" on the screen. What can I do to avoid this?

Try another HDMI cable, and make sure that it is a high-speed version. This solution usually solves the problem, which is caused by insufficient cable bandwith.

Was this helpful? Thank you for your feedback!
Surround Sound formats

Harman Kardon Radiance 2400 can decode Dolby Audio and DTS.

Dolby Atmos is not supported, but will be rendered as Dolby Audio.
Dolby Digital 5.1 and DTS Surround (2.0 and 5.1) is supported, but will be downmixed to 2.1/2.0.
DTS Master Audio is not supported.

Was this helpful? Thank you for your feedback!
The 4 LED dots change to amber on my Citation speaker. What does this mean?

The amber LED lights indicate that the microphone is muted and the Google Assistant will not react to any voice keywords until the microphone is unmuted.

Was this helpful? Thank you for your feedback!
The Bluetooth pairing acknowledgment signal is very loud. Is it possible to reduce the volume of this signal, or will there be a software upgrade that changes the volume?

It is true that some Bluetooth products have a very loud BT acknowledgment tones. We are sorry, but the level of such tones cannot be changed, and no software solutions will appear.

Was this helpful? Thank you for your feedback!