How To
How To
369 results
-
BDS 335/635 are our low cost models, still offering the thrills of a media center with Blu Ray disc player built-in. These systems have passive subwoofers, and the subwoofer amplifier is built in to the BDS unit. The x85S models offer more features, such as Spotify Connect support, and the use of active subwoofers. All depends on your needs and what your personal preferences will be.Was this helpful? Thank you for your feedback!
-
HDCP (High Definition Copy Protection) 2.2 will become mandatory for 4K/UHD content only. First source should be the 4K BD player announced at IFA for spring 2016 from Samsung. In case of HDCP 2.2, the whole chain needs to be compatible to work from source to AVR to TV. If one of the devices in the chain is not HDCP 2.2-compliant, the player will downscale the content to 1080p. No black screen. This is the theory, anyway. HDCP 2.2 is copy-protection, so it does not decode the signal, but is concerned with preserving the content from being copied and distributed on the internet. The problem of HDCP 2.2 is that it is hardware-based, and not software-based, so there is nothing we can do on our existing models, like any other AVR manufacturer or TV. Please note that self-produced 4K material is no problem, since self-produced material has no digital HDCP copy protection. Only streamed material and UHD-Blu-ray will not work, since the HDCP protection will stop the signal in the receiver.Was this helpful? Thank you for your feedback!
-
Vi currently includes support for indoor/outdoor Walking, Jogging, Running, Sprinting, HIIT Runs and Cycling. Our supported activities will continue expanding every few months.Was this helpful? Thank you for your feedback!
-
This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.
Was this helpful? Thank you for your feedback! -
This product does not feature an IPX rating and is not waterproof. Over exposure to water or moisture can result in irreversible damage to this unit.Was this helpful? Thank you for your feedback!
-
Even though the Google Assistant is not built-in, Harman Kardon Radiance 2400 is compatible with a voice-assistant speaker, like the Harman Kardon Citation Series.Was this helpful? Thank you for your feedback!
-
You can use a 3.5 mini-jack cable to connect the Citation Amp (TRIGGER OUT 12V) with your subwoofer or other equipment to have them power on when the Citation Amp wakes from standby.
When the Citation Amp is ON, there will be output 12V DC signal, and when the Citation Amp is OFF mode, there is no output (0V DC).Was this helpful? Thank you for your feedback! -
The Citation Amp can work with 4 ohm speakers and is rated at 200-watts per channel. Do not connect speakers less than 4 ohm! Was this helpful? Thank you for your feedback! -
This receiver has a feature called "A/V Sync Delay" that allows you to manually set dissimilar video and audio synchronization that may occur with certain types of Plasma and HDTV's. The instruction for this setting can be found in your owner's manual in the section "Delay Adjustments" or "Delay Settings".Was this helpful? Thank you for your feedback!
-
The TV input is a single audio input with different options for connectors. If an HDMI cable is connected, then it will always be prioritized. Optical and coaxial digital will be prioritized by first signal present (Be aware, that some optical outputs will register as signal always)
It is not possible to change between the digital inputs for TV source via the remote control.Was this helpful? Thank you for your feedback! -
It is possible to connect a wireless Citation Sub or Sub S to the Citation Amp.Was this helpful? Thank you for your feedback!
-
The two earpieces of your TWS headphones should normally be connected together without issue. However, if they are no longer paired to each other, please follow these steps, in order.
- Forget/unpair the headphones on your device.
- Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
- Pair the headphones to your device and see if this resolves the problem.
- If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
- Initiate a Product Reset to reset the earbud’s Bluetooth connection.
- Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
- Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
- Manually pair the 2 buds together again, as you did in step 2. This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
- Pair the buds to your Source Device.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
WhatsApp Us
Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)