How To

Support Overview / How To

How To

369 results
  • Can I use my OMNI+ device without the HK Controller App?
    Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.
  • Can I use more than one of the TV input connectors at the same time?
    It is possible to connect both HDMI and optical to the TV input at the same time, but HDMI will be prioritized over optical. Switching manually from HDMI to optical is not possible.
  • Can I use Google Chromecast with my first generation Omni speakers?
    No, this is a limitation from Google that requires every speaker to have a special license. First generation OMNI speakers do not have such license.
  • Can I use Dual Sound and Social mode at the same time on my Aura Studio 2?
    No, When connected from multiple mobile devices ( up to 3 ) to one Harman Dual Sound enabled speaker, only the last one that connected will stay connected when enabling Harman Dual Sound. You can however connect from one mobile device to one of the 2 Harman Dual Sound enabled speakers, and activate Dual Sound afterwards. This will give you the option to interrupt the playback, in the same way as Social Mode works when connected to only one speaker.
  • Can I use any OMNI+ speaker without being connected to a Wi-Fi network?
    Yes, when out of range of your Wi-Fi network, you can use the Bluetooth or analog auxiliary connection. The OMNI 50+ has a built-in battery as well to take the speaker out of the house.
  • Can I use another power supply than the one which is in the box?
    The Adapt can be powered from any USB port providing 1 amp current, but Harman recommends using the supplied power adapter.
  • Can I use an Omni+ speaker and a 1st generation Omni speaker together in a stereo pair?
    No, stereo pairs must be two of the same type of speaker. For example, two Omni 10 or two Omni 10+ speakers will work, but not one Omni 10 and one Omni 10+.
  • Can I use Alexa with my Harman Kardon Allure speaker offline?
    No, the Allure speaker requires an internet connection in order to use Alexa voice commands. You can always listen to music via the Bluetooth connection if you are out of range with your Wi-Fi network
  • Can I upgrade my AVR 370 through wireless network connection?
    No, upgrade can only be performed with a USB stick. There is no danger to the receiver if you try to upgrade through the wireless network, though.
  • Can I update the software on my Aura Studio 2?
    Yes, When an update is available, you will find this on the product website of the Harman Kardon Aura Studio 2, in Manuals and Downloads. You will need to connect your Harman Kardon Aura Studio 2 by USB, and run the software update from a compatible computer.
  • Can I turn PureVoice on or off?
    PureVoice is default ON when you turn on the soundbar. You may turn OFF PureVoice by using the LCD touch display. On the touchscreen, swipe to the Settings page, then tap Audio -> PureVoice to enable or disable PureVoice.
     
  • Can I turn off the light on my Harman Kardon Allure speaker?
    Yes. Go into our HK Alexa Setup app, tap on the 3 line icon and click on "Lightning" to toggle it on and off.
  • Can I take phone calls when the Go + Play BT/Wireless is connected to more than one smartphone?
    No, you can only take phone calls when your Go + Play BT/Wireless is connected to a single smartphone. The speaker is designed in this way to protect privacy when it doesn't know which phone is being called. However, some Android phones (e.g. Google Nexus 5) will still transfer the phone call to speaker even when Go + Play BT/Wireless is connected with multiple smartphones. This is caused by the configuration of the phone.
  • Can I take calls from the Onyx Studio 4?
    Yes, you can take can incoming call from the Onyx 4 by pressing the call button located between the power button and volume + button.
  • Can I stream my CD music to a Harman Kardon Wireless HD Audio System?
    Yes. Just connect the analog output from your CD player to the Audio In jack on the back of your Adapt.
  • Can I setup WiFi on my BDS 280S or 580S with my iPhone?
    Yes it is possible. Connect any iOS device (iPhone, iPod touch or iPad) to the front panel USB port of the BDS. Make sure Wi-Fi is enabled on your iOS device and that it is currently connected to your wireless home network. NOTE: iOS version 5 or higher is required for iOS Wi-Fi sharing. 1: Select Configure Wi-Fi by iOS from the Setup Wi-Fi list. A pop-up will be displayed on your iOS device. 2: Select Allow to confirm that you want to share your Wi-Fi settings. 3: The connection should now be established automatically. Check the status on your TV for confirmation"
  • Can I set up a custom WiFi to my BDS system?
    Yes, and it is very simple. Choose the custom setup option if you want to manually connect the BDS system to Wi-Fi. To connect the BDS system to a specific Wi-Fi network, you need to enter the Wi-Fi network name and password in the network settings. Confirm the SSID name. Your BDS should now be connected to the WiFi.
  • Can I see my voice interaction history somewhere on my Harman Kardon Allure?
    Yes, you can see all voice interactions with the Harman Kardon Allure by using the Alexa app and visiting History in Settings. Your interactions are grouped by question or request. Tap an entry to see more detail, provide feedback, or listen to audio sent to the Cloud for that entry by tapping the play icon. Sometimes Alexa may not understand you perfectly, and the translations you see in History may not always reflect exactly what you said (for example, they may be inaccurate or incomplete). You can help us improve your experience by providing feedback on inaccurate translations in History.
  • Can I play contents from a USB stick in Zone 2?
    Yes, Zone 2 can play compatible contents of a USB stick inserted into the front panel of the receiver.
  • Can I make phone calls via my Harman Kardon Allure speaker?
    No, this feature is not supported in our Harman Kardon Allure speaker. This might change with future updates. You can call your Amazon friends by using the Alexa app.
  • Can I get TuneIn Radio to work with first-generation OMNI speakers, if I also have one new OMNI+ speaker?
    Google has licensed Chromecast to OMNI+ speakers only. Therefore, the only way to listen to TuneIn Radio on first-generation OMNI speakers is to use Bluetooth.
  • Can I create a Multi-room system with Harman Kardon Allure?
    Not yet, because this feature is not implemented in our system. We are working on future updates to add the functionality that will make Harman Kardon Allure work in a Multi-room environment.
  • Can I control Zone 2 functions with my iPhone?
    Yes, download the Harman Kardon Remote app to do this.
  • Can I control my OMNI 10+, 20+ or 50+ speakers when I'm on 2.4GHz Wi-Fi network?
    Yes, with OMNI+ you can add speakers to both bands, but your smart device is not required to be on the same band, just be sure they are on the same network.
< 1 ... 12 13 14 15 16 17 >

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

E-mail us

E-mail us

Email our customer service team
365 days, we will reply within 24 hours

Email us
message

WhatsApp Us

Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446 

Mon - Sun: 10:00 am - 7:00 pm (IST)